The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-16-2020, 02:15 PM   #1
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Motorhome Tilt Column, bolt in ready

$250 local, $300 shipped

Please respond in thread only per board rules, first "I'll take it" gets it.

Selling a motorhome tilt column. From a mid 80s GM chassis

I moved the NSS down so it's a bolt-in for your 67-72;
I used my multi-meter to adjust it, you may need to fine tune it after install.

Turn signal has no lever, your original will fit

Turn signal switch is tight and cancels as it should. Includes the pigtail with the flat wire end so you can modify your harness for the newer style switches.

Includes the cancel cam

The gray illumination wire is fairly long

Includes a long pigtail for the Neutral Safety/Reverse switch

Tilt mechanism is tight and smooth.

The 4 bolts in the tilt mechanism that typically loosen over time have been removed and reinstalled with lock-tight.

Tilt pivots were cleaned and lubed when removed to tighten the bolts.

The bottom bearing was cleaned and greased

The upper bearings were cleaned and greased

The shift indicator bulb was replaced and tested OK, it has the green shade on it.

Shifter lever end (inside column) is good, pivot is average

Shift arm and adjuster lever have decent chrome, they shine up well.

The finish on it is OK, great for a driver. Some scratches and wear as pictured.

I will include a new GMC Paul's gear indicator.

You will need to add your dash and firewall gaskets, as well as the firewall plate.

The new gaskets will stretch over the shift arm. Old ones may split.

**I will ship it with the levers and indicator housing removed to avoid shipping damage**
There is a trick to getting the indicator housing and pointer on, I can go over it with you if needed.
Attached Images
     
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ

Last edited by clay68c10; 08-16-2020 at 02:22 PM.
clay68c10 is offline   Reply With Quote
Old 08-16-2020, 02:20 PM   #2
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

More pics
Attached Images
    
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 08-16-2020, 08:55 PM   #3
zach_carver
Registered User
 
zach_carver's Avatar
 
Join Date: Aug 2014
Location: Blue Ridge,GA
Posts: 508
Re: Motorhome Tilt Column, bolt in ready

How will this work in a 1965 c10? Or should I look for something different.
__________________
1965 C10 LS2/4l70, WHITE, 5/7 DROP

LINK TO SUPER SNOOPY C10 BUILD---> http://67-72chevytrucks.com/vboard/s...d.php?t=689283

1977 C10 SILVERADO HAWAIIAN BLUE, 5/5" DROP, LS6/4L80E

1976 CHEVY K5, 350/350, YUBA GOLD/SADDLE
zach_carver is offline   Reply With Quote
Old 08-16-2020, 10:30 PM   #4
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

I honestly don’t know.
You might post up on the 60-66 area and see if anyone has an answer.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 08-17-2020, 10:08 AM   #5
1968C30
Senior Member
 
1968C30's Avatar
 
Join Date: Jan 2012
Location: Mt Nebo WV
Posts: 1,327
Re: Motorhome Tilt Column, bolt in ready

Quote:
Originally Posted by zach_carver View Post
How will this work in a 1965 c10? Or should I look for something different.
I have this column installed in my 64 c10. I have a new wiring harness installed and used a Lokar shifter cable. Here are some pictures
Attached Images
   
__________________
https://paypal.me/DMorris6870
1968C30 is offline   Reply With Quote
Old 08-17-2020, 07:33 PM   #6
BIG ORANGE
Senior Member
 
BIG ORANGE's Avatar
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,742
Re: Motorhome Tilt Column, bolt in ready

Clay if it will go right in a 72 and work.......
PM me
Thanxs
__________________

Things happen for a reason!

Last edited by BIG ORANGE; 08-18-2020 at 02:11 PM.
BIG ORANGE is offline   Reply With Quote
Old 08-17-2020, 07:49 PM   #7
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

Yes it will, you just need to connect the wiring.

Sold to Big Orange

PM sent
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 08-18-2020, 02:12 PM   #8
BIG ORANGE
Senior Member
 
BIG ORANGE's Avatar
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,742
Re: Motorhome Tilt Column, bolt in ready

Thanks for understanding,,,
__________________

Things happen for a reason!
BIG ORANGE is offline   Reply With Quote
Old 08-18-2020, 04:00 PM   #9
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

Big Orange has bowed out, best of luck to him and his.

Back up for sale
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 08-20-2020, 01:54 PM   #10
Leroy-B1
Registered User
 
Join Date: Dec 2010
Location: Mars Hill, NC
Posts: 1,994
Re: Motorhome Tilt Column, bolt in ready

Im interested in this...can you pm me about the wiring details?
Leroy-B1 is offline   Reply With Quote
Old 08-20-2020, 02:57 PM   #11
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

Sure
The wiring colors and pin positions are the same for early and later turn signal switches. The old style has a half-round connector and the new style is flat. New replacement switches come with the flat to half-round adapter.
You can also splice in the pigtail end that I'm including. That updates your truck harness to the flat style connector.
I think you can buy the flat to round adapter separately.

The neutral/reverse switch wiring is similar. Splice it in as necessary. If you have an auto column already you can just swap the connector since it is slightly different. If it's a manual then you can use the pigtail to wire them in.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 08-21-2020, 09:30 PM   #12
Leroy-B1
Registered User
 
Join Date: Dec 2010
Location: Mars Hill, NC
Posts: 1,994
Re: Motorhome Tilt Column, bolt in ready

I'll take it
Leroy-B1 is offline   Reply With Quote
Old 08-22-2020, 08:59 AM   #13
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

Sold to Leroy-B1
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 09-30-2020, 07:39 PM   #14
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

Back to the top, the deal fell thru.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 10-01-2020, 10:44 PM   #15
396ci
Senior Member
 
396ci's Avatar
 
Join Date: Jun 2005
Location: Modesto, CA
Posts: 753
Re: Motorhome Tilt Column, bolt in ready

Quote:
Originally Posted by clay68c10 View Post
Back to the top, the deal fell thru.
if you can do $275 shipped to zip 95356 i will take it. thanks for the consideration.
__________________
Brian
XNGH ECV Chapter 58
1972 Jimmy / Blazer Project 2wd
1974 Chevy Crew Cab Shorty
396ci is offline   Reply With Quote
Old 10-02-2020, 03:55 PM   #16
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

Sure, I can do that
PM sent
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 10-02-2020, 08:34 PM   #17
396ci
Senior Member
 
396ci's Avatar
 
Join Date: Jun 2005
Location: Modesto, CA
Posts: 753
Re: Motorhome Tilt Column, bolt in ready

Quote:
Originally Posted by clay68c10 View Post
Sure, I can do that
PM sent
payment sent. thanks
__________________
Brian
XNGH ECV Chapter 58
1972 Jimmy / Blazer Project 2wd
1974 Chevy Crew Cab Shorty
396ci is offline   Reply With Quote
Old 10-03-2020, 03:47 PM   #18
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,881
Re: Motorhome Tilt Column, bolt in ready

Shipping it out today
Thanks again
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Reply

Bookmarks

Tags
column, comfort tilt, motor home, tilt

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com