Randy & Jakes 64 4x4 SLOW build - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RANDY COX · 08-02-2014, 06:44 PM

I may have to fab up some P.S. brackets, http://www.ebay.com/itm/10003-292-CH...3839e2&vxp=mtr
doesn't look too hard...

**TJ's Chevy** · 08-03-2014, 10:45 AM

I gotta say...that PS pump sure as heck won't be going anywhere! LOL!

RANDY COX · 08-09-2014, 08:52 PM

well I found some original PS brackets on here got them today had to do alittle grinding on head to line up. I'm using early 70's pump and nothing lines up waaaaay off, I do know I need the 292 pump pulley, which I haven't found prolly never will...

**TJ's Chevy** · 08-10-2014, 11:17 AM

I have an 84 chevy with a 292 and it has power steering...wonder if there was a difference in style of the PS bracket through the years.

RANDY COX · 08-10-2014, 01:55 PM

Yes T.J. there's been a difference in the years..

RANDY COX · 08-15-2014, 08:56 PM

I'm getting real close to having power steering again, Just have to get the right size belt then I can take everything apart clean and paint....

RANDY COX · 08-16-2014, 03:23 PM

well Finally have power steering again Woo-Hoo..

This will work until I can get some OEM..

gotta fab up something to hold the battery down then I can test drive it...

**TJ's Chevy** · 08-16-2014, 04:17 PM

Looks good! I do hope you make a video of the test drive! LOL!

RANDY COX · 08-24-2014, 07:56 PM

Well shucks I may have to fab up an motor perch for the passenger side, the gentlemen that had one decided to sell the truck so I'm on the hunt for one or I'll just have to get creative, I really don't think the hammer will last LOL...

61K10 · 08-26-2014, 04:01 PM

Randy make one out of some 2x4's and bungee cords.

RANDY COX · 08-26-2014, 05:24 PM

Quote:

Originally Posted by 61K10

Randy make one out of some 2x4's and bungee cords.

Yea that would be an upgrade LOL...

RANDY COX · 09-16-2014, 06:49 PM

well it's been a while since I worked on the ole truck the weathers been kinda rainy lately,
managed to get out there this evening and welded the driver rear corner in...once I get the other side in I can set the bed back on it....

**TJ's Chevy** · 09-16-2014, 11:02 PM

Nice work!

61K10 · 09-17-2014, 12:03 PM

Randy---we need your rain out here. Big fire about 12 miles from me. already burned 18,000 ac.

RANDY COX · 09-17-2014, 05:15 PM

Kimble I've seen it on the news, I hope yall get rain soon...

RANDY COX · 11-28-2014, 08:21 PM

I've been couped up for too long.. I have been starting it up and letting it run for a little while, other than that not much getting done...I'm ready for spring now...

61K10 · 11-28-2014, 08:42 PM

Randy----it will come together my friend---- builder, just takes awhile! But then it snow balls LOL! IT NEVER ENDS-----------Now that's it close to then end for me--what do i do ? I like working on stuff/ building than the aftermath. don't get old--do your thing now. sure would like to meet up with some of you guy's some days.

take care ------------------Kimble

RANDY COX · 01-17-2015, 10:34 AM

I'm getting ancy I've been kooped up for too long without no Garage I can't do anything.
I'm itching to get out side so the weather supposed to be in the forties so I'm gonna atleast get out there and fire it up and let her run alittle.....

**argonaut** · 01-17-2015, 11:26 AM

I know the feeling Randy! You just have to do small projects indoors. Like rebuild and clean your gauge cluster or something.

**TJ's Chevy** · 01-17-2015, 12:27 PM

Yup...It'll all come together! Took me a year and a half of pure saving before I got my engine done. lol And well worth the wait to! But I hear ya...its been poring cats and dogs here lately. lol

mattbert56 · 01-18-2015, 01:16 PM

Quote:

Originally Posted by argonaut

I know the feeling Randy! You just have to do small projects indoors. Like rebuild and clean your gauge cluster or something.

Like argonaut said. Stay busy with little stuff. They do all come together at one point. but building the tracks are the best part. Other than driving of course. Fine balance between the two.

RANDY COX · 03-16-2015, 05:52 PM

Finally got my pizza cutters mounted, my son took them to school and mounted them for me.. They are LT2358516's mounted on 1948 16's 4 1/2 wide wheels...

I still have to paint the wheels the same color Green as truck. It's kinda hard to see what they really look like without the front end and bed on. Maybe now that the weather has warmed up I can get the right side rear cab mount and rear corner welded in. Then I can set the front end and bed on it and may go ahead and put it on the road and drive it some til I can save more cash to finish with some more new sheet metal...Alittle at a time.

**argonaut** · 03-16-2015, 05:56 PM

I love tall skinnies on these pickups! Looks awesome!
what kind of tires are those? They look a lot like old 9.50-16 bias plys.

mattbert56 · 03-16-2015, 06:00 PM

Man love the look buddy. gives it a really old school tough look. Glad your still keeping us posted on the Build

**bhc41051** · 03-16-2015, 06:09 PM

Those bad boys look sweet! i'd love to have 16's on my piece of junk. Keep up the good work, it's coming along nicely.

08-02-2014, 06:44 PM	#176
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build I may have to fab up some P.S. brackets, http://www.ebay.com/itm/10003-292-CH...3839e2&vxp=mtr doesn't look too hard... __________________ 1964 BBC 402 4x4

08-03-2014, 10:45 AM	#177
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Randy & Jakes 64 4x4 SLOW build I gotta say...that PS pump sure as heck won't be going anywhere! LOL! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-09-2014, 08:52 PM	#178
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build well I found some original PS brackets on here got them today had to do alittle grinding on head to line up. I'm using early 70's pump and nothing lines up waaaaay off, I do know I need the 292 pump pulley, which I haven't found prolly never will... __________________ 1964 BBC 402 4x4

08-10-2014, 11:17 AM	#179
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Randy & Jakes 64 4x4 SLOW build I have an 84 chevy with a 292 and it has power steering...wonder if there was a difference in style of the PS bracket through the years. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-10-2014, 01:55 PM	#180
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build Yes T.J. there's been a difference in the years.. __________________ 1964 BBC 402 4x4

08-15-2014, 08:56 PM	#181
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build I'm getting real close to having power steering again, Just have to get the right size belt then I can take everything apart clean and paint.... __________________ 1964 BBC 402 4x4

08-16-2014, 03:23 PM	#182
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build well Finally have power steering again Woo-Hoo.. This will work until I can get some OEM.. gotta fab up something to hold the battery down then I can test drive it... __________________ 1964 BBC 402 4x4

08-16-2014, 04:17 PM	#183
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Randy & Jakes 64 4x4 SLOW build Looks good! I do hope you make a video of the test drive! LOL! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-24-2014, 07:56 PM	#184
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build Well shucks I may have to fab up an motor perch for the passenger side, the gentlemen that had one decided to sell the truck so I'm on the hunt for one or I'll just have to get creative, I really don't think the hammer will last LOL... __________________ 1964 BBC 402 4x4

08-26-2014, 04:01 PM	#185
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Randy & Jakes 64 4x4 SLOW build Randy make one out of some 2x4's and bungee cords. __________________ 1961 chevy K10 my build is------------61K10 build

09-16-2014, 06:49 PM	#187
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build well it's been a while since I worked on the ole truck the weathers been kinda rainy lately, managed to get out there this evening and welded the driver rear corner in...once I get the other side in I can set the bed back on it.... __________________ 1964 BBC 402 4x4

09-16-2014, 11:02 PM	#188
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Randy & Jakes 64 4x4 SLOW build Nice work! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

09-17-2014, 12:03 PM	#189
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Randy & Jakes 64 4x4 SLOW build Randy---we need your rain out here. Big fire about 12 miles from me. already burned 18,000 ac. __________________ 1961 chevy K10 my build is------------61K10 build

09-17-2014, 05:15 PM	#190
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build Kimble I've seen it on the news, I hope yall get rain soon... __________________ 1964 BBC 402 4x4

11-28-2014, 08:21 PM	#191
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build I've been couped up for too long.. I have been starting it up and letting it run for a little while, other than that not much getting done...I'm ready for spring now... __________________ 1964 BBC 402 4x4



Register or Log In To remove these advertisements.

11-28-2014, 08:42 PM	#192
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Randy & Jakes 64 4x4 SLOW build Randy----it will come together my friend---- builder, just takes awhile! But then it snow balls LOL! IT NEVER ENDS-----------Now that's it close to then end for me--what do i do ? I like working on stuff/ building than the aftermath. don't get old--do your thing now. sure would like to meet up with some of you guy's some days. take care ------------------Kimble __________________ 1961 chevy K10 my build is------------61K10 build

01-17-2015, 10:34 AM	#193
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build I'm getting ancy I've been kooped up for too long without no Garage I can't do anything. I'm itching to get out side so the weather supposed to be in the forties so I'm gonna atleast get out there and fire it up and let her run alittle..... __________________ 1964 BBC 402 4x4

01-17-2015, 11:26 AM	#194
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Randy & Jakes 64 4x4 SLOW build I know the feeling Randy! You just have to do small projects indoors. Like rebuild and clean your gauge cluster or something. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

01-17-2015, 12:27 PM	#195
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Randy & Jakes 64 4x4 SLOW build Yup...It'll all come together! Took me a year and a half of pure saving before I got my engine done. lol And well worth the wait to! But I hear ya...its been poring cats and dogs here lately. lol __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

03-16-2015, 05:52 PM	#197
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Randy & Jakes 64 4x4 SLOW build Finally got my pizza cutters mounted, my son took them to school and mounted them for me.. They are LT2358516's mounted on 1948 16's 4 1/2 wide wheels... I still have to paint the wheels the same color Green as truck. It's kinda hard to see what they really look like without the front end and bed on. Maybe now that the weather has warmed up I can get the right side rear cab mount and rear corner welded in. Then I can set the front end and bed on it and may go ahead and put it on the road and drive it some til I can save more cash to finish with some more new sheet metal...Alittle at a time. __________________ 1964 BBC 402 4x4

03-16-2015, 05:56 PM	#198
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Randy & Jakes 64 4x4 SLOW build I love tall skinnies on these pickups! Looks awesome! what kind of tires are those? They look a lot like old 9.50-16 bias plys. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

03-16-2015, 06:00 PM	#199
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Randy & Jakes 64 4x4 SLOW build Man love the look buddy. gives it a really old school tough look. Glad your still keeping us posted on the Build __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-16-2015, 06:09 PM	#200
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 784	Re: Randy & Jakes 64 4x4 SLOW build Those bad boys look sweet! i'd love to have 16's on my piece of junk. Keep up the good work, it's coming along nicely.

Register or Log In To remove these advertisements.