6L80 transmission rebuild, relearn, & TCC wiring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

First c10 · 02-19-2018, 02:37 AM

Hey guys
I rebuilt the 2011 6L80 and reinstalled it into my sons truck and was told to re learn the transmission through hp tuners. When I do it, it asked me to apply the brake. When I did I got nothing and the relearn aborts.
So I guess I have a TCC wiring issue.
I have wired it to 12v brake applied, ground when applied and even installed a 1k resister on the ground wire through a relay.
No matter what I did the message asked me to apply brake and then it would abort.
The truck does not move in drive or reverse.

Anyone had this problem? Can anyone help?

02-19-2018, 02:37 AM	#1
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	6L80 transmission rebuild, relearn, & TCC wiring Hey guys I rebuilt the 2011 6L80 and reinstalled it into my sons truck and was told to re learn the transmission through hp tuners. When I do it, it asked me to apply the brake. When I did I got nothing and the relearn aborts. So I guess I have a TCC wiring issue. I have wired it to 12v brake applied, ground when applied and even installed a 1k resister on the ground wire through a relay. No matter what I did the message asked me to apply brake and then it would abort. The truck does not move in drive or reverse. Anyone had this problem? Can anyone help? __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.