Project Checklist Help Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pontitruck · 01-15-2019, 08:48 PM

Hello guys, I need your help.
I bought a 65 SWB project that was taken off the frame and assembled. It has a 5.3 with an AR5 manual set up but I am removing all of that including the PSI Harness to go to a 4l60e. It also came with an American Autowire upgrade kit and I purchased the Vintage Air kit for it.
Since my truck is assembled and the drivetrain is in place, can anyone recommend a project plan to wire it, install the vintage air and switch out the trans?
I'm feeling a bit overwhelmed but have a fairly decent mechanical skill set. If this were a classic Pontiac, I'd be much more comfortable.

Any ideas where to start is appreciated.
Thanks
Joe

01-15-2019, 08:48 PM	#1
Pontitruck Registered User Join Date: Sep 2018 Location: South of the Indy 500 Posts: 116	Project Checklist Help Needed Hello guys, I need your help. I bought a 65 SWB project that was taken off the frame and assembled. It has a 5.3 with an AR5 manual set up but I am removing all of that including the PSI Harness to go to a 4l60e. It also came with an American Autowire upgrade kit and I purchased the Vintage Air kit for it. Since my truck is assembled and the drivetrain is in place, can anyone recommend a project plan to wire it, install the vintage air and switch out the trans? I'm feeling a bit overwhelmed but have a fairly decent mechanical skill set. If this were a classic Pontiac, I'd be much more comfortable. Any ideas where to start is appreciated. Thanks Joe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.