CA Parting 74 Jimmy (Blazer) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 02-05-2011, 12:12 PM

I will be parting this Jimmy next week. I pulled this out of the mud on a farm and it has been sitting for years. The sheet metal is bad, the rear axle is junk, and the engine is tired. I will be using the buckets and the gas tank for my project. Please respond in thread to avoid confusion.
Thanks, Ray

bare rusty tub with clean CA title on non op- $250 SOLD

top some cracks at rear pillars- $100 local SOLD

back seat needs cover- $75 local

fender emblems- $26 shipped SOLD

windshield frame- $100 plus shipping

203 transfer case- $50 local

door caps- $27 shipped pair SOLD

steering column- $30 plus shipping

KrazyRay · 02-05-2011, 12:20 PM

222

KrazyRay · 02-05-2011, 12:23 PM

333

*sharpie1972* · 02-05-2011, 01:11 PM

Hi Ray, I need all the top hold down hardware and the passenger side hook that the tailgate latches on. I'll post a pic of the hook in a bit. Thanks, Sharpie

glimmertwin01 · 02-05-2011, 09:01 PM

cargo area side panels?

**jerry moss** · 02-05-2011, 10:24 PM

Ray,
not trying to second guess since you have the truck but i thought 4 speed trucks in that era had 205s behind them. i could be wrong-have been many times before-but was curious. looking at the pics, it looks like it has stock spicer hubs on it. i had a 73 K10 many years ago that actually had a turbo 350/205 combo from the factory and it had the spicer hubs.

glimmertwin01 · 02-06-2011, 12:11 AM

it should be a 205

KrazyRay · 02-06-2011, 01:23 AM

Sharpie, $7 shipped for the pass hook...I need to think about the top hardware-It might be needed to sell the top.
glimmertwin01, Do you need inside panels? The outside is not very good.
Much to my chagrin, it is a 203...I was surprised too! By the way, the PO sold the original axles and took "rollers" in trade.

*sharpie1972* · 02-06-2011, 06:05 PM

Hi Ray, no problem on the top hardware. I checked and mine is present. Just the hook then. Please PM payment info. Thanks, Sharpie

BigRed76 · 02-07-2011, 01:12 AM

Hi Ray, does this one have the fuel filler neck? Also does it have the fuel filler neck cover/hump that bolts in on the interior?

KrazyRay · 02-07-2011, 01:29 AM

Quote:

Originally Posted by BigRed76

Hi Ray, does this one have the fuel filler neck? Also does it have the fuel filler neck cover/hump that bolts in on the interior?

I have the hump for the interior, $10 plus shipping. I might be using the filler neck along with the tank on my project.
Thanks, Ray

spudz · 02-07-2011, 01:35 AM

how much for the grill center support grill mount and the outer grill brackets??

BigRed76 · 02-07-2011, 01:35 AM

Quote:

Originally Posted by KrazyRay

I have the hump for the interior, $10 plus shipping. I might be using the filler neck along with the tank on my project.
Thanks, Ray

Ok. I will take the hump, shipping is to 80537. I am asking about filler necks because I will also be doing a blazer tank swap in my shortbed. I am hoping the stepside filler will work since the 73-77 blazer filler necks are hard to come by.

KrazyRay · 02-07-2011, 01:39 AM

Quote:

Originally Posted by spudz

how much for the grill center support grill mount and the outer grill brackets??

$25 plus shipping.
Thanks, Ray

KrazyRay · 02-07-2011, 01:42 AM

Quote:

Originally Posted by BigRed76

Ok. I will take the hump, shipping is to 80537. I am asking about filler necks because I will also be doing a blazer tank swap in my shortbed. I am hoping the stepside filler will work since the 73-77 blazer filler necks are hard to come by.

I'll hurry up on the step side neck and if it works, we can save on shipping by putting both in same box.
Thanks, Ray

Hertzdaddy · 02-07-2011, 10:21 AM

I may be interested in the door caps and the manual column if available. Let me know how much for the column.

KrazyRay · 02-07-2011, 10:42 AM

Quote:

Originally Posted by Hertzdaddy

I may be interested in the door caps and the manual column if available. Let me know how much for the column.

The caps and the manual column are $74 shipped to VA.
Thanks, Ray

BigRed76 · 02-07-2011, 12:06 PM

Quote:

Originally Posted by KrazyRay

I'll hurry up on the step side neck and if it works, we can save on shipping by putting both in same box.
Thanks, Ray

Sounds good to me Ray.
Posted via Mobile Device

Hertzdaddy · 02-07-2011, 01:13 PM

Quote:

Originally Posted by KrazyRay

The caps and the manual column are $74 shipped to VA.
Thanks, Ray

Woops! I found my caps and just noticed your column was non-tilt. I'm looking for a tilt manual. Sorry for the mix-up.

k1rodeoboater · 02-07-2011, 04:36 PM

how much would you want for just the steelies (without rubber) shipped to 28310?

<eta> or any other good (non bent) 6 lug rims you may have for that matter. I'm looking for 15"rims to put on my 6 lug 66 and are compatible with disc brakes.

centexan · 02-07-2011, 05:54 PM

I'll take the jimmy fender emblems if they aren't spoken for.

centexan · 02-07-2011, 06:05 PM

Also, is the grill in good shape and how much? Thanks!

SS Delux · 02-07-2011, 09:29 PM

Does it have tailgate trim ? Pics and price if you do.

KrazyRay · 02-07-2011, 11:41 PM

Hertzdaddy- no problem

k1rodeoboater- $100 for the shipping and $80 for 4 wheels= $180 shipped

centexan- sorry grille is broken above the latch... fender emblems are yours...pm sent

SS Delux- I will check Wed.

Thanks, Ray

glimmertwin01 · 02-08-2011, 03:42 PM

ray the inside back side panels..or are they absent or beat up?

02-05-2011, 12:12 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 74 Jimmy (Blazer) I will be parting this Jimmy next week. I pulled this out of the mud on a farm and it has been sitting for years. The sheet metal is bad, the rear axle is junk, and the engine is tired. I will be using the buckets and the gas tank for my project. Please respond in thread to avoid confusion. Thanks, Ray bare rusty tub with clean CA title on non op- $250 SOLD top some cracks at rear pillars- $100 local SOLD back seat needs cover- $75 local fender emblems- $26 shipped SOLD windshield frame- $100 plus shipping 203 transfer case- $50 local door caps- $27 shipped pair SOLD steering column- $30 plus shipping Attached Images Last edited by KrazyRay; 03-08-2011 at 02:08 PM.

02-05-2011, 12:20 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) 222 Attached Images

02-05-2011, 12:23 PM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) 333 Attached Images

02-05-2011, 01:11 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 74 Jimmy (Blazer) Hi Ray, I need all the top hold down hardware and the passenger side hook that the tailgate latches on. I'll post a pic of the hook in a bit. Thanks, Sharpie

02-05-2011, 09:01 PM	#5
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting 74 Jimmy (Blazer) cargo area side panels? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

02-05-2011, 10:24 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,742	Re: Parting 74 Jimmy (Blazer) Ray, not trying to second guess since you have the truck but i thought 4 speed trucks in that era had 205s behind them. i could be wrong-have been many times before-but was curious. looking at the pics, it looks like it has stock spicer hubs on it. i had a 73 K10 many years ago that actually had a turbo 350/205 combo from the factory and it had the spicer hubs. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 02-05-2011 at 10:28 PM.

02-06-2011, 12:11 AM	#7
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting 74 Jimmy (Blazer) it should be a 205 __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

02-06-2011, 01:23 AM	#8
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) Sharpie, $7 shipped for the pass hook...I need to think about the top hardware-It might be needed to sell the top. glimmertwin01, Do you need inside panels? The outside is not very good. Much to my chagrin, it is a 203...I was surprised too! By the way, the PO sold the original axles and took "rollers" in trade. Last edited by KrazyRay; 02-06-2011 at 01:26 AM.

02-06-2011, 06:05 PM	#9
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 74 Jimmy (Blazer) Hi Ray, no problem on the top hardware. I checked and mine is present. Just the hook then. Please PM payment info. Thanks, Sharpie

02-07-2011, 01:12 AM	#10
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Parting 74 Jimmy (Blazer) Hi Ray, does this one have the fuel filler neck? Also does it have the fuel filler neck cover/hump that bolts in on the interior? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

02-07-2011, 01:35 AM	#12
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Parting 74 Jimmy (Blazer) how much for the grill center support grill mount and the outer grill brackets?? __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

02-07-2011, 10:21 AM	#16
Hertzdaddy Registered User Join Date: Oct 2008 Location: Montpelier, VA Posts: 315	Re: Parting 74 Jimmy (Blazer) I may be interested in the door caps and the manual column if available. Let me know how much for the column.

02-07-2011, 04:36 PM	#20
k1rodeoboater Registered User Join Date: Nov 2010 Location: Fayetteville NC Posts: 752	Re: Parting 74 Jimmy (Blazer) how much would you want for just the steelies (without rubber) shipped to 28310? <eta> or any other good (non bent) 6 lug rims you may have for that matter. I'm looking for 15"rims to put on my 6 lug 66 and are compatible with disc brakes. Last edited by k1rodeoboater; 02-07-2011 at 04:42 PM.

02-07-2011, 05:54 PM	#21
centexan Registered User Join Date: Aug 2006 Location: Austin, Texas Posts: 167	Re: Parting 74 Jimmy (Blazer) I'll take the jimmy fender emblems if they aren't spoken for. __________________ 1989 Chevy Suburban v1500

02-07-2011, 06:05 PM	#22
centexan Registered User Join Date: Aug 2006 Location: Austin, Texas Posts: 167	Re: Parting 74 Jimmy (Blazer) Also, is the grill in good shape and how much? Thanks! __________________ 1989 Chevy Suburban v1500



Register or Log In To remove these advertisements.

02-07-2011, 09:29 PM	#23
SS Delux Registered User Join Date: Jun 2010 Location: windsor Posts: 290	Re: Parting 74 Jimmy (Blazer) Does it have tailgate trim ? Pics and price if you do.

02-07-2011, 11:41 PM	#24
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) Hertzdaddy- no problem k1rodeoboater- $100 for the shipping and $80 for 4 wheels= $180 shipped centexan- sorry grille is broken above the latch... fender emblems are yours...pm sent SS Delux- I will check Wed. Thanks, Ray Last edited by KrazyRay; 02-07-2011 at 11:42 PM.

02-08-2011, 03:42 PM	#25
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting 74 Jimmy (Blazer) ray the inside back side panels..or are they absent or beat up? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

Register or Log In To remove these advertisements.