OR Serpentine belt conversions - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jb70c10 · 06-13-2014, 07:04 AM

Quote:

Originally Posted by Lee H

Any issues running the stock fan shroud with this swap, either AC or non-AC shroud? I installed a serpentine system about 10 years ago with electric fans. I'm getting tired of relays and fan motors going out so I'm going with a clutch fan and shroud. I have the correct fan & clutch, I now need to source a shroud that will fit.

Same deal here. My factory 70 model shroud is to small for the factory late model fan. Fan and shroud opening both measure 19 1/2" diameter. What shroud do I need for the serpentine set up to work?

calvin78612 · 06-17-2014, 07:11 AM

Sbc setup, shipping to 76008.

**tll74** · 06-19-2014, 02:10 AM

Quote:

Originally Posted by Jb70c10

Same deal here. My factory 70 model shroud is to small for the factory late model fan. Fan and shroud opening both measure 19 1/2" diameter. What shroud do I need for the serpentine set up to work?

I'm not really sure what buyers have been doing about shrouds. You may want to send some PM's to other guys that have done the conversion. I do know that some have used electric fans.

Quote:

Originally Posted by calvin78612

Sbc setup, shipping to 76008.

Shipping is 75.00

Thanks, Tom

Dirt_Baller · 07-13-2014, 09:15 PM

Can you set one with alternator ,crank, long water pump and power steering with idler? Shipped to 78234. I have electric fans so no need for anything but the pulley for the water pump.

Aaronsk5 · 07-25-2014, 07:07 PM

Im looking for a sbc serpentine set up with a 134 compressor. Will you pm me with a total going to 98146

DrawDown · 07-29-2014, 11:54 PM

I'm looking for a complete SBC setup using an r134 compressor. Can you PM me a price shipped to 77386? Detailed as well. Thanks!

**tll74** · 07-31-2014, 02:05 AM

Quote:

Originally Posted by Aaronsk5

Im looking for a sbc serpentine set up with a 134 compressor. Will you pm me with a total going to 98146

Quote:

Originally Posted by DrawDown

I'm looking for a complete SBC setup using an r134 compressor. Can you PM me a price shipped to 77386? Detailed as well. Thanks!

PM's sent to both of you guys, Thanks, Tom

**TBONE1964** · 08-01-2014, 02:25 PM

Bump

TobyArnot · 08-01-2014, 03:37 PM

Aren't the R4 compressor all made for Freon? Based on some advise from a friend at Vintage Air, I flushed my compressor and used it with 134. Vintage also makes a conversion kit with brackets for a Sanden compressor with a serpentine pulley, Straight swap, just more $$$

67stepside · 08-13-2014, 08:44 PM

Hi, I was wondering if you still had any small block kits? I have a 68 327. The right head does have 1 mounting hole in it. Left has 2. Will this work? I need a kit with no a/c compressor and no smog pump. Will my stock fan shroud work?What would the price be with shipping to 47203? Thanks

**tll74** · 08-22-2014, 01:40 AM

Quote:

Originally Posted by TobyArnot

Aren't the R4 compressor all made for Freon? Based on some advise from a friend at Vintage Air, I flushed my compressor and used it with 134. Vintage also makes a conversion kit with brackets for a Sanden compressor with a serpentine pulley, Straight swap, just more $$$

Yup if you flush the system the pump won't care if it has R12 or R134.

Quote:

Originally Posted by 67stepside

Hi, I was wondering if you still had any small block kits? I have a 68 327. The right head does have 1 mounting hole in it. Left has 2. Will this work? I need a kit with no a/c compressor and no smog pump. Will my stock fan shroud work?What would the price be with shipping to 47203? Thanks

Your 327 has later heads on it so these conversions will work just fine. I can do the conversion as asked. As for the shroud I'm not sure. Many members in this thread have bought one so you may consider asking them. 200.00 for the conversion less the AC pump and with a idler to take the place of the pump. 70.00 shipping. Thanks, Tom

03glide · 08-22-2014, 08:45 AM

I would like the complete kit. Pricing to 28405 and how you would like to be paid.

sbc. cleaned no detail.

bigguy69 · 08-22-2014, 09:11 AM

How much would a kit be to 28752

**tll74** · 08-23-2014, 02:21 AM

Quote:

Originally Posted by 03glide

I would like the complete kit. Pricing to 28405 and how you would like to be paid.

sbc. cleaned no detail.

75.00 shipping and paypal or MO would be fine.

Quote:

Originally Posted by bigguy69

How much would a kit be to 28752

75.00 shipping

Thanks, Tom

Bullockchevy · 08-27-2014, 02:29 PM

Interested in a Big Block kit if you have one, shipped to 65803.

Thanks,
Trent

SpawnAden · 09-04-2014, 10:50 PM

Same on BBC kit.... Still need one.

**tll74** · 09-07-2014, 10:36 AM

Quote:

Originally Posted by Bullockchevy

Interested in a Big Block kit if you have one, shipped to 65803.

Thanks,
Trent

Quote:

Originally Posted by SpawnAden

Same on BBC kit.... Still need one.

Sorry guys no BBC kits right now.

sb69chevy · 10-04-2014, 12:08 AM

Pm sent with info

**tll74** · 10-17-2014, 01:53 AM

Quote:

Originally Posted by sb69chevy

Pm sent with info

PM's returned.

cst350 · 11-06-2014, 09:50 PM

PM sent with questions about using existing Vintage air compressor with your SBC kit

Thanks

jjzepplin · 11-21-2014, 06:39 AM

I need one of those fittings for the older flare type.

greyghost · 11-21-2014, 04:47 PM

Paypal sent to you on 11-20 and address in the PM. Looking forward to getting this and getting my project closer to being finished!

greyghost · 11-22-2014, 05:01 PM

Sent you another pm

**tll74** · 11-23-2014, 01:09 PM

Quote:

Originally Posted by greyghost

Sent you another pm

PM returned

Quote:

Originally Posted by jjzepplin

I need one of those fittings for the older flare type.

I have it. 12.00 shipped

Thanks, Tom

jjzepplin · 11-23-2014, 05:39 PM

Quote:

Originally Posted by tll74

PM returned

I have it. 12.00 shipped

Thanks, Tom

I'll take it!

06-17-2014, 07:11 AM	#2
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 803	Re: Serpentine belt conversions Sbc setup, shipping to 76008. __________________ 84 step side 87 swb

07-13-2014, 09:15 PM	#4
Dirt_Baller Registered User Join Date: Feb 2014 Location: Ft Campbell Posts: 82	Re: Serpentine belt conversions Can you set one with alternator ,crank, long water pump and power steering with idler? Shipped to 78234. I have electric fans so no need for anything but the pulley for the water pump.

07-25-2014, 07:07 PM	#5
Aaronsk5 Registered User Join Date: Jul 2014 Location: Burien Wa Posts: 3	Re: Serpentine belt conversions Im looking for a sbc serpentine set up with a 134 compressor. Will you pm me with a total going to 98146

07-29-2014, 11:54 PM	#6
DrawDown Registered User Join Date: Jul 2014 Location: Houston, Tx Posts: 23	Re: Serpentine belt conversions I'm looking for a complete SBC setup using an r134 compressor. Can you PM me a price shipped to 77386? Detailed as well. Thanks!

08-01-2014, 02:25 PM	#8
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Serpentine belt conversions Bump __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

08-01-2014, 03:37 PM	#9
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Re: Serpentine belt conversions Aren't the R4 compressor all made for Freon? Based on some advise from a friend at Vintage Air, I flushed my compressor and used it with 134. Vintage also makes a conversion kit with brackets for a Sanden compressor with a serpentine pulley, Straight swap, just more $$$

08-13-2014, 08:44 PM	#10
67stepside Registered User Join Date: Jan 2002 Location: Columbus, IN. USA Posts: 140	Re: Serpentine belt conversions Hi, I was wondering if you still had any small block kits? I have a 68 327. The right head does have 1 mounting hole in it. Left has 2. Will this work? I need a kit with no a/c compressor and no smog pump. Will my stock fan shroud work?What would the price be with shipping to 47203? Thanks

08-22-2014, 08:45 AM	#12
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Re: Serpentine belt conversions I would like the complete kit. Pricing to 28405 and how you would like to be paid. sbc. cleaned no detail.

08-22-2014, 09:11 AM	#13
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Serpentine belt conversions How much would a kit be to 28752 __________________ members met: redbaron69, billsbowtie,nc67 Last edited by bigguy69; 08-22-2014 at 09:20 AM.

08-27-2014, 02:29 PM	#15
Bullockchevy Registered User Join Date: Oct 2007 Location: Springfield, MO Posts: 13	Re: Serpentine belt conversions Interested in a Big Block kit if you have one, shipped to 65803. Thanks, Trent __________________ 1969 Short Bed Step Side http://thebullocksolution.com/69-chevy-c10-the-history/

09-04-2014, 10:50 PM	#16
SpawnAden Registered User Join Date: May 2013 Location: Destin Posts: 24	Re: Serpentine belt conversions Same on BBC kit.... Still need one.

10-04-2014, 12:08 AM	#18
sb69chevy Registered User Join Date: Oct 2006 Location: Springfield, MO Posts: 375	Re: Serpentine belt conversions Pm sent with info __________________ 1969 C/10 swb, 350, powerglide (daily driver) 2005 CRV (wife's ride)

11-06-2014, 09:50 PM	#20
cst350 Registered User Join Date: Dec 2003 Location: nor cal Posts: 215	Re: Serpentine belt conversions PM sent with questions about using existing Vintage air compressor with your SBC kit Thanks

11-21-2014, 06:39 AM	#21
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,546	Re: Serpentine belt conversions I need one of those fittings for the older flare type. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

11-21-2014, 04:47 PM	#22
greyghost Registered User Join Date: May 2008 Location: Katy,Tx Posts: 65	Re: Serpentine belt conversions Paypal sent to you on 11-20 and address in the PM. Looking forward to getting this and getting my project closer to being finished!



Register or Log In To remove these advertisements.

11-22-2014, 05:01 PM	#23
greyghost Registered User Join Date: May 2008 Location: Katy,Tx Posts: 65	Re: Serpentine belt conversions Sent you another pm

Register or Log In To remove these advertisements.