IN Idler arm frame bracket - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GCraw86 · 08-15-2019, 11:45 AM

These are for 68 Chevy C10 correct? The one on my 68 frame is bent towards the driver side, of which I’m guessing is no bueno; and I tried paring one from my 72 frame but don’t believe it’s matching up.
Posted via Mobile Device

**Todd68Chevy** · 08-16-2019, 05:26 PM

Quote:

Originally Posted by GCraw86

These are for 68 Chevy C10 correct? The one on my 68 frame is bent towards the driver side, of which I’m guessing is no bueno; and I tried paring one from my 72 frame but don’t believe it’s matching up.
Posted via Mobile Device

I have a few but not sure what year most of them are other than 67-72. I don't know of any difference between them other than the 67 power assist steering might be. What makes you think the 72 is different than your 68 is? Are they both C10?

Styler1968 · 04-13-2020, 01:20 PM

Any chance you have any of these left?

**Todd68Chevy** · 04-13-2020, 04:26 PM

Quote:

Originally Posted by Styler1968

Any chance you have any of these left?

I will probably have to remove one but I am sure I have some. I am sorry but the current price is $20 each plus shipping. Shipping to the US will be $8.20 flat rate box or possibly less.

Styler1968 · 04-13-2020, 05:22 PM

Sounds good any chance you have a drag link also? Can you send me your contact info?

**Todd68Chevy** · 04-13-2020, 05:33 PM

Quote:

Originally Posted by Styler1968

Sounds good any chance you have a drag link also? Can you send me your contact info?

What year? 67-70 or 71-72?

Styler1968 · 04-13-2020, 05:40 PM

I am actually working on a 66 C10 but the spindles are 73-87 because of the suspension kit I bought from QA1 so I really need it for a 73-87 if there is a difference in the size of tie rod ends, pitman arm and idler arm.

**Todd68Chevy** · 04-13-2020, 05:52 PM

Yes they are different from the 67-72 center links. As far as I know all the 73-87 are the same but not positive. I do have a 73-87 center link. $50 plus shipping.

**Todd68Chevy** · 04-13-2020, 07:30 PM

Quote:

Originally Posted by Styler1968

I am actually working on a 66 C10 but the spindles are 73-87 because of the suspension kit I bought from QA1 so I really need it for a 73-87 if there is a difference in the size of tie rod ends, pitman arm and idler arm.

I will need your zip code to figure the shipping cost. Thanks

Styler1968 · 04-13-2020, 09:19 PM

78130

**Todd68Chevy** · 04-17-2020, 05:13 AM

Quote:

Originally Posted by Styler1968

78130

Shipped. Thanks

70blackfish · 07-04-2020, 11:13 PM

Do you know if 73-87 Blazer are different? And do you
Have any ?

**Todd68Chevy** · 07-05-2020, 06:54 AM

Quote:

Originally Posted by 70blackfish

Do you know if 73-87 Blazer are different? And do you
Have any ?

I know the center link a tie rod ends are larger on the 73-87 trucks so I would guess the idler arm is larger also but it don't know that for sure. Do you have a 2 wd Blazer?

**Todd68Chevy** · 07-05-2020, 08:30 AM

Quote:

Originally Posted by 70blackfish

Do you know if 73-87 Blazer are different? And do you
Have any ?

According to Napathey use the same idler arm from 67-82 2wd so the bracket might be the same but I don't have any way to prove that it is or prove that it isn't.

70blackfish · 07-05-2020, 07:55 PM

Thank you.

68Gold/white · 07-06-2020, 11:32 AM

The bracket should interchange. We are talking about Chevrolet pickups, not some junker fords or dodges that are engineered by stupidity, to start with!!!!

73 luck · 08-27-2020, 04:37 PM

Still available?

**Todd68Chevy** · 08-27-2020, 08:49 PM

Quote:

Originally Posted by 73 luck

Still available?

I might have to remove one but I am sure I have some. The current price is $20 each plus shipping. Shipping to the US will be $8.20 flat rate box or possibly less. Probably will be Saturday before I can get one available.

el3m3nt3l · 03-17-2021, 02:26 AM

Do you have an idler bracket for a 72 C10 2wd with the center link? Thanks.

**Mathew21** · 08-06-2021, 07:49 PM

I know it's an old ad but I'm trying to help someone find one. Do you still have one for sale?
Thanks

FRCvette · 09-21-2022, 11:26 AM

I would like to have one too for my 67.

SilverGT3RS · 09-21-2023, 10:08 AM

I’m looking for a bracket for a 67-69 c10. Let me know if you have one.

08-15-2019, 11:45 AM	#26
GCraw86 Registered User Join Date: Aug 2019 Location: Franklin, PA Posts: 1	Re: Idler arm frame bracket These are for 68 Chevy C10 correct? The one on my 68 frame is bent towards the driver side, of which I’m guessing is no bueno; and I tried paring one from my 72 frame but don’t believe it’s matching up. Posted via Mobile Device

04-13-2020, 01:20 PM	#28
Styler1968 Registered User Join Date: Jun 2011 Location: New Braunfels, TX Posts: 36	Re: Idler arm frame bracket Any chance you have any of these left?

04-13-2020, 05:22 PM	#30
Styler1968 Registered User Join Date: Jun 2011 Location: New Braunfels, TX Posts: 36	Re: Idler arm frame bracket Sounds good any chance you have a drag link also? Can you send me your contact info?

04-13-2020, 05:40 PM	#32
Styler1968 Registered User Join Date: Jun 2011 Location: New Braunfels, TX Posts: 36	Re: Idler arm frame bracket I am actually working on a 66 C10 but the spindles are 73-87 because of the suspension kit I bought from QA1 so I really need it for a 73-87 if there is a difference in the size of tie rod ends, pitman arm and idler arm.

04-13-2020, 05:52 PM	#33
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Idler arm frame bracket Yes they are different from the 67-72 center links. As far as I know all the 73-87 are the same but not positive. I do have a 73-87 center link. $50 plus shipping. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

04-13-2020, 09:19 PM	#35
Styler1968 Registered User Join Date: Jun 2011 Location: New Braunfels, TX Posts: 36	Re: Idler arm frame bracket 78130

07-04-2020, 11:13 PM	#37
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Idler arm frame bracket Do you know if 73-87 Blazer are different? And do you Have any ? __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

07-05-2020, 07:55 PM	#40
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Idler arm frame bracket Thank you. __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

07-06-2020, 11:32 AM	#41
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,278	Re: Idler arm frame bracket The bracket should interchange. We are talking about Chevrolet pickups, not some junker fords or dodges that are engineered by stupidity, to start with!!!!

08-27-2020, 04:37 PM	#42
73 luck Registered User Join Date: Jan 2009 Location: So. California Posts: 11	Re: Idler arm frame bracket Still available?

03-17-2021, 02:26 AM	#44
el3m3nt3l Registered User Join Date: May 2011 Location: CHICAGO, IL. Posts: 50	Re: Idler arm frame bracket Do you have an idler bracket for a 72 C10 2wd with the center link? Thanks.

08-06-2021, 07:49 PM	#45
Mathew21 Senior Member Join Date: May 2010 Location: Clinton township, MI Posts: 1,190	Re: Idler arm frame bracket I know it's an old ad but I'm trying to help someone find one. Do you still have one for sale? Thanks __________________ It only has original paint once

09-21-2022, 11:26 AM	#46
FRCvette Registered User Join Date: Mar 2007 Location: cincy Posts: 693	Re: Idler arm frame bracket I would like to have one too for my 67. __________________ There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb

09-21-2023, 10:08 AM	#47
SilverGT3RS Registered User Join Date: Apr 2019 Location: SC Posts: 63	Re: Idler arm frame bracket I’m looking for a bracket for a 67-69 c10. Let me know if you have one.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.