1954 Chevy Panel Truck.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

3100 special · 03-24-2004, 01:39 AM

...parts fer sale. Part of truck project and the parts are flying off of the truck as fast as the wife will let me spend time in the garage in the evenings.. : )>

Rather than list everything, click on the URL in my signature line. BTW, there are two pages of pictures so, don't miss anything!
Thanks,
Jon

gregbr · 03-24-2004, 07:59 AM

Nice looking panel.....wish mine were that nice. Have any extra rear fenders for sale? How much trouble was it to remove the wood floor? Thanks, Greg

Blue Beard · 03-24-2004, 08:56 AM

What are your plans for her...?

3100 special · 03-24-2004, 03:37 PM

Greg,
thanks, I like her. Sorry, no extra fenders. The wood was a pain in the rear. The problem was the metal strip that is around the outside edge of the wood. Do a search on 3100 special posts and you should find a post on the fun I had.

BB,
I'm saving for:
IFS Mustang II front
Chevy ZZ4 crate engine
TH350 tranny (I think)
Chevy 12 bolt rear
Custom interior
Unknown paint scheme

gregbr · 03-24-2004, 05:33 PM

Can't find the post 3100 Special... Can you send a link?

3100 special · 03-24-2004, 11:25 PM

I found what I had put on this board... http://67-72chevytrucks.com/vboard/s...threadid=95758

Dubie had also posted the question for me on another board that I hadn't been to before...http://www.stovebolt.com/bboard/cgi-...c;f=1;t=011626

And then there was....
http://www.stovebolt.com/bboard/cgi-...c;f=1;t=011662

Let me know if you have any more questions. I'm learning as I go but, maybe I can help,
Jon

3100 special · 05-01-2004, 06:55 PM

I'm fixing to jack the chassis off of the frame....
The seats are gone but, I still have the rear end, the drive shaft, the tranny and the engine that are going to go.

Make a reasonable offer and they're yours. I need some project money!!!!!

3100 special · 05-09-2004, 03:09 PM

TTT
Got some new pics on the website of additional items for sale. I just wanted to get them cleaned off before taking pics.
Thanks,
Jon

gregbr · 05-09-2004, 06:31 PM

3100 special, Could you send me some good measurements for the bolt holes and maybe a close-up picture of the mounting position of the rear trun signals. I have a set I'm getting ready and want to mount them in the right spot. You could also sell me the deluxe trim pieces cheap.....HAHA. Thanks, Greg

3100 special · 05-09-2004, 07:31 PM

Sure. I should have a little time this evening to do that.
On the trim...

. Oh, sorry. I mean they're not available at this time....

3100 special · 05-09-2004, 09:45 PM

Started a new thread over here....
http://67-72chevytrucks.com/vboard/s....php3?t=103566

03-24-2004, 01:39 AM	#1
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	1954 Chevy Panel Truck.... ...parts fer sale. Part of truck project and the parts are flying off of the truck as fast as the wife will let me spend time in the garage in the evenings.. : )> Rather than list everything, click on the URL in my signature line. BTW, there are two pages of pictures so, don't miss anything! Thanks, Jon __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776

03-24-2004, 07:59 AM	#2
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Nice looking panel.....wish mine were that nice. Have any extra rear fenders for sale? How much trouble was it to remove the wood floor? Thanks, Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-24-2004, 08:56 AM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	What are your plans for her...? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

03-24-2004, 03:37 PM	#4
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	Greg, thanks, I like her. Sorry, no extra fenders. The wood was a pain in the rear. The problem was the metal strip that is around the outside edge of the wood. Do a search on 3100 special posts and you should find a post on the fun I had. BB, I'm saving for: IFS Mustang II front Chevy ZZ4 crate engine TH350 tranny (I think) Chevy 12 bolt rear Custom interior Unknown paint scheme __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776

03-24-2004, 05:33 PM	#5
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Can't find the post 3100 Special... Can you send a link? __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-24-2004, 11:25 PM	#6
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	I found what I had put on this board... http://67-72chevytrucks.com/vboard/s...threadid=95758 Dubie had also posted the question for me on another board that I hadn't been to before...http://www.stovebolt.com/bboard/cgi-...c;f=1;t=011626 And then there was.... http://www.stovebolt.com/bboard/cgi-...c;f=1;t=011662 Let me know if you have any more questions. I'm learning as I go but, maybe I can help, Jon __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776

05-01-2004, 06:55 PM	#7
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	I'm fixing to jack the chassis off of the frame.... The seats are gone but, I still have the rear end, the drive shaft, the tranny and the engine that are going to go. Make a reasonable offer and they're yours. I need some project money!!!!! __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776

05-09-2004, 03:09 PM	#8
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	TTT Got some new pics on the website of additional items for sale. I just wanted to get them cleaned off before taking pics. Thanks, Jon __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776

05-09-2004, 06:31 PM	#9
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	3100 special, Could you send me some good measurements for the bolt holes and maybe a close-up picture of the mounting position of the rear trun signals. I have a set I'm getting ready and want to mount them in the right spot. You could also sell me the deluxe trim pieces cheap.....HAHA. Thanks, Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-09-2004, 07:31 PM	#10
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	Sure. I should have a little time this evening to do that. On the trim... . Oh, sorry. I mean they're not available at this time.... __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776

05-09-2004, 09:45 PM	#11
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	Started a new thread over here.... http://67-72chevytrucks.com/vboard/s....php3?t=103566 __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.