The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Closed Thread
 
Thread Tools Display Modes
Old 04-06-2015, 09:11 AM   #1
skeeterbug
Registered User
 
skeeterbug's Avatar
 
Join Date: Jul 2009
Location: watertown, tn
Posts: 332
Edited by staff

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.
__________________
'71 LWB c10-"WORK" in progress
385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall

2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better)
2013 best 7.39
2014 best-7.38

New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

Last edited by kcsa75; 04-10-2015 at 01:08 AM.
skeeterbug is offline  
Old 04-09-2015, 03:52 PM   #2
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,334
Re: OEM p/s brakets for long water pump needed...

Quote:
Originally Posted by skeeterbug View Post
Hopefully the moderators wont get upset that i listed this here, just seems to be more traffic here than on parts board. I'm in dire need of the original brackets for a sbc p/s pump with long water pump. Ive been using an aluminum aftermarket one that is aggravating as hell, but it finally crapped the bed. My truck is a race only application so im thinking the original steel ones will hold up much better.

Unfortunately you can't post a wanted to buy thread anywhere on the board unless you are a Premium member...(name in Blue) If you are a Premium member you still have to post stuff in the correct forum....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline  
Old 04-09-2015, 07:54 PM   #3
SS Tim
Registered User
 
SS Tim's Avatar
 
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,504
Re: OEM p/s brakets for long water pump needed...

The rules are in place for a reason.

Try Speedway Motors, www.speedwaymotors.com over in the racing and oval track parts section.

Like cheyenneshortstep said long pumps were 73 up on CK truck applications. So if you feel that will work try searching the 73-87 classifieds.
http://67-72chevytrucks.com/vboard/forumdisplay.php?f=5

If this is a "race only", I question carrying the weight of a power steering set up in the first place considering its factory listed as 33lbs over the stock manual box.
SS Tim is offline  
Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com