The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Truck Audio

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-18-2013, 03:23 PM   #1
Dale99
Registered User
 
Join Date: Nov 2007
Location: NLR, AR
Posts: 1,387
2008 Help restoring to stock setup

I purchased at 08 Sierra over the weekend. The previous owner had a cell phone device, and possibly an aftermarket sub setup in the truck.

My rear speakers are not working. I have the middle level 6 speaker setup, no bose, no center console.

I removed all the cell phone device stuff that interacted with the stereo, they still dont work.

I looked at the stock harness to see if it was tapped/cut in the radio area, nope.

Where else would be an "easy" place to tap into the rears?
__________________
2008 Sierra k3500 LMM
1994 s10 blazer 4x4
1991 Camaro Vert Rusted in Half RIP
1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364
1967 C10 L6/3tree(dads truck)
Dale99 is offline   Reply With Quote
Old 02-18-2013, 03:34 PM   #2
jimmydean
Registered User
 
jimmydean's Avatar
 
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,730
Re: 2008 Help restoring to stock setup

Easiest thing is to trace the wires of the speakers that don't work. The rears are likely tied together and run down the drivers side to under the dash. Follow the wires, make sure they are connected still and go from there.
__________________
New Project: 1966 LWB C20
Plans:
1/2 ton conversion
Dropmember front
Dropmember rear
Corvette discs
Restored raised bed

http://67-72chevytrucks.com/vboard/s....php?p=4295210
jimmydean is offline   Reply With Quote
Old 02-18-2013, 04:43 PM   #3
Dale99
Registered User
 
Join Date: Nov 2007
Location: NLR, AR
Posts: 1,387
Re: 2008 Help restoring to stock setup

Wouldnt they separate the left from the right, and channel them down the appropriate sill plate area to the b-post, up the b, and into the rear door jamb? Or thats how I would do it.
Dale99 is offline   Reply With Quote
Old 02-18-2013, 08:05 PM   #4
Dale99
Registered User
 
Join Date: Nov 2007
Location: NLR, AR
Posts: 1,387
Re: 2008 Help restoring to stock setup

Figured out on my way home from work, the drivers door didnt work either. Tested the radio with a old used speaker, all the channels work. After finding a thread on another forum, 11 pages of people with 08-10's with blown speakers just after leaving warranty. I'm gonna guess these speakers are blown :/
Dale99 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com