aftermarket step side fender 68-72 how nice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dilling · 09-04-2008, 04:09 PM

anybody use them how did they fit

tcb-1 · 09-04-2008, 04:57 PM

I'm watching this as well!! ttt

bu the way, are you talking metal or fiberglass??

dilling · 09-04-2008, 11:42 PM

bump

**special-K** · 09-05-2008, 06:02 AM

I can`t say,personally.But,I have some factory ones that may be workable with your skills.I`ve talking to John about coming down.I can`t believe he didn`t let me know when he came down the last time.I was working on his next door neighbor`s house Nov/Dec last year and told him I wanted (needed) to get over to Massey.
The ones I have are still mounted so can`t speak for the flanges.But,they are virtually dentless and in factory paint.There is rust along the lower front above the runningboard.

Sorry for the hijack.I`d like to hear how the repros are,too.

67ChevyRedneck · 09-05-2008, 08:33 AM

I've looked them over at Charlotte a couple of times. They *appear* to be well made AND they actually have some weight to them. I would consider buying a set if it wasn't for the price, last I checked they were still around $400 EACH

**68350** · 09-05-2008, 05:32 PM

Used a goodmark one on the 68 shorty. excellently made and fits very well. Be careful to check as soon as you get it as shipping seems to damage quite a few.

Ol'Rover · 09-05-2008, 06:47 PM

watching.

bean · 09-05-2008, 06:58 PM

I used on I purchased from Kenny's out of OK. It was metal and the fit was excellent. Gave a great price... was well under $400 for what he called a "blem". Keep in mind my truck is a regular driver but the only reall difference I could see was that it was scuffed on top. Otherwise, the fit was excellent.

4tiresngas · 09-06-2008, 03:56 AM

Dilling, I build my entire stepside bed from reproduction parts. I have owned two other original stepsides. I think the repros looked and fit great. There is pic on this old post: http://67-72chevytrucks.com/vboard/s...94#post1721494

09-04-2008, 04:09 PM	#1
dilling Registered User Join Date: Jan 2007 Location: massey Posts: 74	aftermarket step side fender 68-72 how nice anybody use them how did they fit

09-04-2008, 04:57 PM	#2
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: aftermarket step side fender 68-72 how nice I'm watching this as well!! ttt bu the way, are you talking metal or fiberglass?? __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

09-04-2008, 11:42 PM	#3
dilling Registered User Join Date: Jan 2007 Location: massey Posts: 74	Re: aftermarket step side fender 68-72 how nice bump

09-05-2008, 06:02 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: aftermarket step side fender 68-72 how nice I can`t say,personally.But,I have some factory ones that may be workable with your skills.I`ve talking to John about coming down.I can`t believe he didn`t let me know when he came down the last time.I was working on his next door neighbor`s house Nov/Dec last year and told him I wanted (needed) to get over to Massey. The ones I have are still mounted so can`t speak for the flanges.But,they are virtually dentless and in factory paint.There is rust along the lower front above the runningboard. Sorry for the hijack.I`d like to hear how the repros are,too. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-05-2008, 08:33 AM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: aftermarket step side fender 68-72 how nice I've looked them over at Charlotte a couple of times. They appear to be well made AND they actually have some weight to them. I would consider buying a set if it wasn't for the price, last I checked they were still around $400 EACH __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-05-2008, 05:32 PM	#6
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: aftermarket step side fender 68-72 how nice Used a goodmark one on the 68 shorty. excellently made and fits very well. Be careful to check as soon as you get it as shipping seems to damage quite a few. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

09-05-2008, 06:47 PM	#7
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: aftermarket step side fender 68-72 how nice watching. __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

09-05-2008, 06:58 PM	#8
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 915	Re: aftermarket step side fender 68-72 how nice I used on I purchased from Kenny's out of OK. It was metal and the fit was excellent. Gave a great price... was well under $400 for what he called a "blem". Keep in mind my truck is a regular driver but the only reall difference I could see was that it was scuffed on top. Otherwise, the fit was excellent.

09-06-2008, 03:56 AM	#9
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Re: aftermarket step side fender 68-72 how nice Dilling, I build my entire stepside bed from reproduction parts. I have owned two other original stepsides. I think the repros looked and fit great. There is pic on this old post: http://67-72chevytrucks.com/vboard/s...94#post1721494 __________________ Dan dan.brue@us.army.mil



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.