Where to get 350 small block 4 speed granny low shift stick - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tino0217 · 12-21-2018, 02:40 AM

Shift stick recently snapped off an i had it welded back together. Where do i get another shifter that i can replace it just in case the weld , which was done very well, where should i start looking? Any ideas would be appreciated.

**special-K** · 12-21-2018, 12:02 PM

The obvious places would be the parts board, Craigslist, FB pages, and swap meets. You can broaden your search by looking for more than just out of a 350 truck. They were all the same no matter which motor came in the truck.

**'68OrangeSunshine** · 12-21-2018, 09:07 PM

You want a shift lever for an SM465 [ or CH465]. First production year for this transmission was 1968. Also called a 4 Speed Muncie.
General Motors put them behind about every truck engine they had: L6s 250, 292, V8s 327, 350, 400, 396, 402, 427, 454, V6s 305, 351.
Very tough tranny. You don't usually need the compound low "granny gear" but when you do, it's nice that it's there.
The SM420 was its predecessor -- last year 1967. Slightly shorter case length, lower gears had even lower ranges than the 465. Gear #4 is 1:1 of course.
SM is for SynchroMesh. No synchro in 1st.

**WorkinLonghorn** · 12-21-2018, 09:22 PM

Could be NP 435.

https://www.ebay.com/i/153090533214?chn=ps

**'68OrangeSunshine** · 12-22-2018, 01:18 AM

Quote:

Originally Posted by WorkinLonghorn

Could be NP 435.

https://www.ebay.com/i/153090533214?chn=ps

Pardon the assumption.
Yes, without pix, it could be anything.

tino0217 · 12-22-2018, 04:39 PM

Yeah I can do that but I don't know how to post pictures on this forum

**Ironhorse** · 12-22-2018, 05:00 PM

Pretty sure I have one in the parts stash. Let me know if interested and I will dig it out and post a pic of it to the parts board. Stick only, no gear shift knob.

**'68OrangeSunshine** · 12-22-2018, 05:11 PM

Tino, click Post Reply, or if you hit Quick Reply, then hit Go Advanced. From there find Attach Files and hit Manage Attachments.
A side window will pop up with 5 boxes marked Choose File. Clicking on one will bring you to your saved pictures. [Select up to 5, but the fewer, the faster.]
Select one or more, then hit Upload, once the white circle stops spinning, hit Close Window.
If you can see an icon above Manage Attachments, hit Submit Reply, and that's it.

Here's an SM465/T221 in the back of my Stepside. Not the best pic, but I needed to post a pic to see all the steps in the process.

El Dorado Jim · 12-23-2018, 06:54 PM

yeah, definitely need to find out which trans you have , what year truck?

tino0217 · 12-30-2018, 06:04 AM

This 350 as far as what I've been told by the owner, is out of 85 blazer

El Dorado Jim · 12-30-2018, 08:02 PM

Quote:

Originally Posted by tino0217

This 350 as far as what I've been told by the owner, is out of 85 blazer

engine size or year doesnt matter, need to get a pic of your transmission, they used the same transmission if it was a small block or big block

tino0217 · 01-03-2019, 06:03 AM

71 c10

renegade6 · 01-03-2019, 01:38 PM

If you don't find a used one, take a look at Novak adapt. They have one that you can bend to suit your needs.

**Ironhorse** · 01-03-2019, 01:54 PM

I found the one I have, came from a Muncie SM265 out of a 71 2wd. Will get some pics taken of it and post to the parts forum and you take a look. Should be correct for your truck year for original look.

**Ironhorse** · 01-03-2019, 06:00 PM

tino0217, posted the pics of the shift stick I have in the 67-72 parts forum section. You have first call if interested.

12-21-2018, 02:40 AM	#1
tino0217 Registered User Join Date: May 2017 Location: Seatac, wa Posts: 172	Where to get 350 small block 4 speed granny low shift stick Shift stick recently snapped off an i had it welded back together. Where do i get another shifter that i can replace it just in case the weld , which was done very well, where should i start looking? Any ideas would be appreciated.

12-21-2018, 12:02 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Where to get 350 small block 4 speed granny low shift stick The obvious places would be the parts board, Craigslist, FB pages, and swap meets. You can broaden your search by looking for more than just out of a 350 truck. They were all the same no matter which motor came in the truck. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 12-21-2018 at 12:13 PM.

12-21-2018, 09:07 PM	#3
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,042	Re: Where to get 350 small block 4 speed granny low shift stick You want a shift lever for an SM465 [ or CH465]. First production year for this transmission was 1968. Also called a 4 Speed Muncie. General Motors put them behind about every truck engine they had: L6s 250, 292, V8s 327, 350, 400, 396, 402, 427, 454, V6s 305, 351. Very tough tranny. You don't usually need the compound low "granny gear" but when you do, it's nice that it's there. The SM420 was its predecessor -- last year 1967. Slightly shorter case length, lower gears had even lower ranges than the 465. Gear #4 is 1:1 of course. SM is for SynchroMesh. No synchro in 1st. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

12-22-2018, 04:39 PM	#6
tino0217 Registered User Join Date: May 2017 Location: Seatac, wa Posts: 172	Re: Where to get 350 small block 4 speed granny low shift stick Yeah I can do that but I don't know how to post pictures on this forum

12-22-2018, 05:00 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,024	Re: Where to get 350 small block 4 speed granny low shift stick Pretty sure I have one in the parts stash. Let me know if interested and I will dig it out and post a pic of it to the parts board. Stick only, no gear shift knob. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

12-21-2018, 09:22 PM	#4
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,855	Re: Where to get 350 small block 4 speed granny low shift stick Could be NP 435. https://www.ebay.com/i/153090533214?chn=ps __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, 2nd owner, Work-Truck supreme. Best $300 I ever spent.

12-22-2018, 05:11 PM	#8
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,042	Re: Where to get 350 small block 4 speed granny low shift stick Tino, click Post Reply, or if you hit Quick Reply, then hit Go Advanced. From there find Attach Files and hit Manage Attachments. A side window will pop up with 5 boxes marked Choose File. Clicking on one will bring you to your saved pictures. [Select up to 5, but the fewer, the faster.] Select one or more, then hit Upload, once the white circle stops spinning, hit Close Window. If you can see an icon above Manage Attachments, hit Submit Reply, and that's it. Here's an SM465/T221 in the back of my Stepside. Not the best pic, but I needed to post a pic to see all the steps in the process. Attached Images __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

12-23-2018, 06:54 PM	#9
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Where to get 350 small block 4 speed granny low shift stick yeah, definitely need to find out which trans you have , what year truck?

12-30-2018, 06:04 AM	#10
tino0217 Registered User Join Date: May 2017 Location: Seatac, wa Posts: 172	Re: Where to get 350 small block 4 speed granny low shift stick This 350 as far as what I've been told by the owner, is out of 85 blazer Attached Images

01-03-2019, 06:03 AM	#12
tino0217 Registered User Join Date: May 2017 Location: Seatac, wa Posts: 172	Re: Where to get 350 small block 4 speed granny low shift stick 71 c10 Attached Images

01-03-2019, 01:38 PM	#13
renegade6 Registered User Join Date: Nov 2008 Location: Texarkana, TX Posts: 443	Re: Where to get 350 small block 4 speed granny low shift stick If you don't find a used one, take a look at Novak adapt. They have one that you can bend to suit your needs. __________________ Brandon 63 Biscayne https://www.pro-touring.com/threads/90718-63-Biscayne 57 Chevy Truck (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=321380 72 K20 Long bed stepside (wife's) 72 K20 Long bed 396 (flip or keep...?) The latest build: http://67-72chevytrucks.com/vboard/s...76#post8438476

01-03-2019, 01:54 PM	#14
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,024	Re: Where to get 350 small block 4 speed granny low shift stick I found the one I have, came from a Muncie SM265 out of a 71 2wd. Will get some pics taken of it and post to the parts forum and you take a look. Should be correct for your truck year for original look. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-03-2019, 06:00 PM	#15
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,024	Re: Where to get 350 small block 4 speed granny low shift stick tino0217, posted the pics of the shift stick I have in the 67-72 parts forum section. You have first call if interested. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.