What did you do to (or with) your truck today.

[Grizz1963]

Little jobs

Little jobs

All get done, eventually.

Some sooner than others.

This one is a pain in the butt, because of the amount of dismantling needed to get it done, not quote the same as popping a new toilet roll on, though I believe even that is a struggle for some.

So Rob sent me these bits.



And the battery tray, though a lot better than mine, still needed work.

Rough as a badgers bum.



So I thought about it.

Wire wheel, or blast it, except my blasting cabinet is 80 miles from here with Craig as he is cleaning small bits for his sons Mk1 Golf Rabbit Cabriolet

So plan B ?

Take a chance and run down to the industrial estate to Kerbed Wheels to ask Thomas how much t do it. “Leave it here, come back tomorrow” was his reply.

So yesterday at about 4.30 I ran down there again to find he had blasted it for me, Cost? No charge, because he had done it after they shut down shop on Wednesday evening.

Pleased with that.

Loads of pitting from all the rust, I guess the are cheaply made parts and are also exposed to weather and having a concave shape, water may stay there a bit longer and drive the rusting process. Add to that, cheap mass produced paint, and you certainly have a recipe for disaster in the long term.


Result.



By the time I got home it was 5.30 so I decided to get the etch primer out and my heat gun.

Warmed the piece up, primed it one side, dried it and turned over, repeat.



Then on to three coats of satin black, again lighter than usual, but dried with help inbetween.

First coat down.



And then three coats later, it looks glossy, is actually dry, but it is a high impact wheel paint, so surprised me with the final finish.

The pitting is very obvious now as well, but does not bother me, as it is an improvement, and will be going down under the battery.

As an add in, I will add some strips of rubber (maybe old inner tube material) to absorb some of the movement when the battery is bolted down.



Little jobs indeed.