Porterbuilt 69 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jasonb72 · 01-19-2008, 10:44 AM

What do you need, and I will supply!!!!!

onetonk5 · 01-19-2008, 10:57 AM

How do you get anything done with all these folks nose's up your butt?

Blaz-air · 01-19-2008, 11:08 AM

Dude, have you seen his butt?

n2billet · 01-19-2008, 12:33 PM

[QUOTE=porterbuilt;2535005]I still can't feel the tip of my left ring finger!

This has nothing to do with you not being able to carry your end of the trans! It has everything to do with that silver band on that finger!

PBFAB.COM · 01-19-2008, 01:43 PM

Quote:

Originally Posted by onetonk5

How do you get anything done with all these folks nose's up your butt?

Some days I too wonder!

RunninLo · 01-19-2008, 01:47 PM

Quote:

Originally Posted by Rokcrln

Josh I am sure he will take an early payment just to keep you off that bike! Nate is just that kind of a stand up guy

Kevin
LFD Inc.

I could only be so lucky.... I've had an order with CC # supplied with another vender for over 4 months and still no suspension. It's sad I could build something myself if I had the time but I never thought I'd have trouble spending the money. I need a rear set-up that goes in as quick and smooth as the DM did in the front so I will continue to wait. Did just get my new frame in for the racebike and a few extra parts should be at the dealer next week so spending should slow down on it soon. Of course I do need to spend some at performance machine getting new brakes for my knucklehead and that will hurt some. Always something....

PBFAB.COM · 01-19-2008, 01:47 PM

Well... since it felt so good yesterday I had to get some more today! It's been so long that I almost had forgotten how much fun this stuff can be!

I cleaned up a couple hours early and busted out the driver's side fender. I shaved the marker light and went ahead and stripped the exterior.... mocked it up and stared at it for a while! I also had to unbolt the rear wheels and set it down on the drums so the rake wasn't so bad. Still not close to ride height in the rear... but will have to do for now!

PBFAB.COM · 01-19-2008, 01:48 PM

two more...

FnLow69 · 01-19-2008, 02:00 PM

looks sweet, what do you use to get the fender that smooth?

Rokcrln · 01-19-2008, 02:03 PM

So Nate when is this rear suspension going to be available. I am sure their are alot of us waiting to order? So what morot are you going with a 5.3 or 6.0L and what HP are you thinking it will put out after the two hair driers are fired up?
Nice job on the marker removal. It takes me way to long to do a seamless job like that but it is getting faster by the day.

Kevin
LFD Inc.

PBFAB.COM · 01-19-2008, 02:14 PM

Quote:

Originally Posted by FnLow69

looks sweet, what do you use to get the fender that smooth?

I made the marker fillers by taking a sheet of 18ga. that was roughly 12"x12" and rolled it on my english wheel until the contour matched the fender as close as I could get it (didn't take too long, the radius is subtle). I then cut out the filler piece (just big enough to remove the stamped marker recess hole), laid it on the fender over the marker light recess; traced my filler piece, cut-out the marked hole and marker recess, then made sure it all fit tight, fired up the TIG welder and stitched it in, allowing it to cool and using the hammer and dolly to keep it straight. Then I stripped the whole fender with a 36 grit DA, 60 grit DA, and finally an 80 grit DA.

PBFAB.COM · 01-19-2008, 02:17 PM

Quote:

Originally Posted by Rokcrln

So Nate when is this rear suspension going to be available. I am sure their are alot of us waiting to order? So what morot are you going with a 5.3 or 6.0L and what HP are you thinking it will put out after the two hair driers are fired up?
Nice job on the marker removal. It takes me way to long to do a seamless job like that but it is getting faster by the day.

Kevin
LFD Inc.

It's a 5.7 out of a 02 SS Camaro. Came with headers, ported heads, under-drive pulleys, SPEC racing clutch, and who knows what internals... looked like the guy spent a bunch of money and then wrecked his car with all that extra power?

I will be trying to keep it at around 600 hp. It will be capable of much more, but I would have to upgrade everything to be able to use that kind of power.

FnLow69 · 01-19-2008, 02:22 PM

600hp that sound a little conservative with twin turbos.

PBFAB.COM · 01-19-2008, 02:28 PM

Quote:

Originally Posted by FnLow69

600hp that sound a little conservative with twin turbos.

Very conservative... with the proper tuning and internal upgrades it could make over 1000hp. I just don't want to spend the extra coin and or brake stuff!!! 600hp is plenty for me!

jkade · 01-19-2008, 10:43 PM

Quote:

Originally Posted by porterbuilt

two more...

Are those a set of saltsters I see in the back ground??

PBFAB.COM · 01-20-2008, 12:23 AM

Quote:

Originally Posted by jkade

Are those a set of saltsters I see in the back ground??

They're Boyd Cotterpin "ACE" wheels... they are BAD ACE!!!!!

I thought they looked cool in pics, but in person... WOW!

abadsvt · 01-20-2008, 04:33 AM

Hey Nate how bout some pics of the conv. belair? Is that the one you were wanting to do the c5 drivetrain too?

Josh

jugernot · 01-20-2008, 06:45 AM

Quote:

Originally Posted by Rokcrln

So Nate when is this rear suspension going to be available. I am sure their are alot of us waiting to order? So what morot are you going with a 5.3 or 6.0L and what HP are you thinking it will put out after the two hair driers are fired up?
Nice job on the marker removal. It takes me way to long to do a seamless job like that but it is getting faster by the day.

Kevin
LFD Inc.

What Rear Suspension. Is there a link to it, I need some pics......please.

Rokcrln · 01-20-2008, 06:52 AM

Quote:

Originally Posted by jugernot

What Rear Suspension. Is there a link to it, I need some pics......please.

No you don't your frame is done, powder coated and finished! Now get back to work

Kevin
LFD Inc.

**N2TRUX** · 01-20-2008, 07:34 AM

Quote:

Originally Posted by porterbuilt

They're Boyd Cotterpin "ACE" wheels... they are BAD ACE!!!!!!

Cool Wheel!

Rokcrln · 01-20-2008, 08:22 AM

Quote:

Originally Posted by porterbuilt

They're Boyd Cotterpin "ACE" wheels... they are BAD ACE!!!!!

I thought they looked cool in pics, but in person... WOW!

I missed that the first time around

Kevin
LFD Inc.

babyblueoval · 01-20-2008, 10:34 AM

Nate,

I see you're running the "Porterbuilt Signature" Wheels on the truck.

PBFAB.COM · 01-20-2008, 11:06 AM

Quote:

Originally Posted by N2TRUX

Cool Wheel!

The image makes the center look like it has a sheen to it or maybe a brushed finish...at least that's what I thought. Actually, the center is a rough cast looking piece... pretty darn cool.

atp · 01-20-2008, 11:13 AM

Looks great! - any luck on the swaybar?

I am getting closer on mine. Ran fuel lines today. Curious if you have any close up on the motor mounts?

jugernot · 01-20-2008, 01:43 PM

Quote:

Originally Posted by Rokcrln

No you don't your frame is done, powder coated and finished! Now get back to work

Kevin
LFD Inc.

I know I know. There are ton of other things I can use the money for to finish the project. I actually just bought some Second Skin Damplifier sound deadening mat and a blazer gas filler tube for this mod.

http://67-72chevytrucks.com/vboard/s...=1#post2489088

01-19-2008, 10:44 AM	#101
jasonb72 PorterBuilt Man Crush Join Date: Jul 2007 Location: Allen, tx Posts: 291	Re: Porterbuilt 69 What do you need, and I will supply!!!!! __________________ The 72 will live again

01-19-2008, 10:57 AM	#102
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: Porterbuilt 69 How do you get anything done with all these folks nose's up your butt? __________________ If I dont do it....somebody else will.

01-19-2008, 11:08 AM	#103
Blaz-air Digital Dude Join Date: Jun 2000 Location: St. Louis Posts: 611	Re: Porterbuilt 69 Dude, have you seen his butt? __________________ Carter Hickman www.hokdigitalpaintbooth.com carterhickmandesigns.com

01-19-2008, 12:33 PM	#104
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Porterbuilt 69 [QUOTE=porterbuilt;2535005]I still can't feel the tip of my left ring finger! This has nothing to do with you not being able to carry your end of the trans! It has everything to do with that silver band on that finger! __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-19-2008, 01:47 PM	#107
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt 69 Well... since it felt so good yesterday I had to get some more today! It's been so long that I almost had forgotten how much fun this stuff can be! I cleaned up a couple hours early and busted out the driver's side fender. I shaved the marker light and went ahead and stripped the exterior.... mocked it up and stared at it for a while! I also had to unbolt the rear wheels and set it down on the drums so the rake wasn't so bad. Still not close to ride height in the rear... but will have to do for now! Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-19-2008, 01:48 PM	#108
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt 69 two more... Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-19-2008, 02:00 PM	#109
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: Porterbuilt 69 looks sweet, what do you use to get the fender that smooth? __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

01-19-2008, 02:03 PM	#110
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Porterbuilt 69 So Nate when is this rear suspension going to be available. I am sure their are alot of us waiting to order? So what morot are you going with a 5.3 or 6.0L and what HP are you thinking it will put out after the two hair driers are fired up? Nice job on the marker removal. It takes me way to long to do a seamless job like that but it is getting faster by the day. Kevin LFD Inc.

01-19-2008, 02:22 PM	#113
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: Porterbuilt 69 600hp that sound a little conservative with twin turbos. __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

01-20-2008, 04:33 AM	#117
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Porterbuilt 69 Hey Nate how bout some pics of the conv. belair? Is that the one you were wanting to do the c5 drivetrain too? Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

01-20-2008, 10:34 AM	#122
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: Porterbuilt 69 Nate, I see you're running the "Porterbuilt Signature" Wheels on the truck. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

01-20-2008, 11:13 AM	#124
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: Porterbuilt 69 Looks great! - any luck on the swaybar? I am getting closer on mine. Ran fuel lines today. Curious if you have any close up on the motor mounts?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.