|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-20-2019, 07:17 PM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Calgary, Alberta
Posts: 153
|
Ignition switch assembly diagram???
My inginition switch on the dash seems to have become very loose all of a sudden. Does anyone have a drawing or pic of how the different components go together. Seems to turn loose as a whole assembly now when i turn the key and before I unplug the harness and pull it apart I was hoping someone had some sort of assembly diagram.
Thanks! |
|
|
|
03-20-2019, 09:11 PM
|
#2 | |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,331
|
Re: Ignition switch assembly diagram???
Quote:
Here is a picture of the parts. The spacer slides on the threaded part of the switch and this assembly installs from the rear, then the bezel screws on from the front to hold it all together. The ignition cylinder goes in last and you have to have the key in it to install it..... I would say that the chrome bezel just needs to be tightened up. Push on the switch from the back and make sure that the key hole is straight up and down and the key removed before you try to tighten it up. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 03-20-2019 at 09:16 PM. |
|
|
|
|
|
03-20-2019, 09:53 PM
|
#3 |
|
Registered User
Join Date: Jul 2011
Location: Calgary, Alberta
Posts: 153
|
Re: Ignition switch assembly diagram???
Awesome - thanks much. I have all the parts I need. Will install tomorrow.
|
|
|
|
|
03-20-2019, 10:25 PM
|
#4 | |
|
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,331
|
Re: Ignition switch assembly diagram???
Quote:
Let us know how it goes. Be careful when you screw the chrome bezel on, the threads are really fine and it is easy to get cross threaded. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
|
03-21-2019, 04:02 PM
|
#5 |
|
Registered User
Join Date: Jul 2011
Location: Calgary, Alberta
Posts: 153
|
Re: Ignition switch assembly diagram???
Well turns out someone put some Ford spacer parts behind the bezel - No wonder the ignition became loose behind the dash. I was wondering why my new parts did not match the ones on my truck. All good now. Should be against the law to put Ford parts on a GM!!!
|
|
|
|
|
03-21-2019, 08:29 PM
|
#6 | |
|
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,331
|
Re: Ignition switch assembly diagram???
Quote:
 .... You sure never know what you are going to find on these 50 year old trucks. At least it was something easy to replace.Glad you got it all figured out. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
