KS Complete Set - Jack, Jack Handle & Lug Wrench

[Ironhorse]

PRICE REDUCED - $135 SHIPPED - LOWER 48 STATES


Complete set consisting of the jack, jack handle and your choice of either the 3/4'' half ton lug wrench or the 13/16'' three quarter ton lug wrench, both shown in the pic. Jack is fully operational, functions well and extends to 16'' at full lift and retracts to 7 1/4'' in lowered position. Jack handle rivet is firm with no slop, lock collar slides well. No damage or chips on either lug wrench for your choice of one. All parts pictured have been bead blasted, primed and painted satin black. Sliding cylinders of the jack have been wire brushed to remove any scale, very light blems remaining. Not NOS but one of the nicest sets you will find. Worthy of a NICE restored truck, Blazer or Suburban. Can do other close up pics if wanted, let me know specifics areas of interest. $135 shipped within lower 48 states, money order, do not have Paypal.

[Ironhorse]

PRICE REDUCED - $135 SHIPPED - LOWER 48 STATES



Have been contacted by a member with a question concerning the listed jack capacity being for a half ton or three quarter ton truck. Not knowing that myself I started searching posts and found this posting and parts book reference pic from ROGER KOOP who ''knows'' these trucks. From the info shown in the parts reference pic it would appear that their is NO DIFFERENCE for a 1/2 or a 3/4 ton jack be it 2WD or 4WD. The difference of application is WITH the lug wrench fitting the lug nut, be it for half ton or three quarter ton.

SEE POST #14 in the linked thread below.

https://67-72chevytrucks.com/vboard/...d.php?t=569928

Set consists of the jack - folding jack handle- and choice of ONE lug wrench to fit half ton or three quarter ton application.