Tail light fuel filler - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cjohnson6772 · 03-11-2013, 08:01 AM

I found out my engine left the machine shop Friday

ao I'll need the filler sooner than I though. Any word?
Posted via Mobile Device

**Hart_Rod** · 03-11-2013, 10:59 AM

I'm sure it will be an outstanding product!

cjohnson6772 · 03-26-2013, 05:38 PM

I'm at the point in my project where I desperately need this. Any update?
Posted via Mobile Device

danw210 · 03-26-2013, 07:20 PM

Me too ^^^^^

Mickm69 · 03-29-2013, 10:13 PM

Guys, we have had a small setback with the bending process. I have redesigned in a fashion that should make it feasible to bend without issue.
I hope to have a sample this coming week.
I'll post results as soon as I have them.
Cheers!
Mickm69

cjohnson6772 · 03-31-2013, 10:26 PM

Quote:

Originally Posted by Mickm69

Guys, we have had a small setback with the bending process. I have redesigned in a fashion that should make it feasible to bend without issue.
I hope to have a sample this coming week.
I'll post results as soon as I have them.
Cheers!
Mickm69

Hoping for a few details to aid in my project process while waiting on the prototype. I know you were shooting for a design that could be installed on a finished truck without requiring a repaint. Does that still look realistic? With the bed still assembled? Does it need to have the fill hose ran into the stake pocket corner?
Posted via Mobile Device

cjohnson6772 · 04-14-2013, 09:54 PM

Bump for an update
Posted via Mobile Device

70blackfish · 04-15-2013, 09:14 AM

BUMP>>>

Mickm69 · 04-15-2013, 10:17 AM

Hi Guys,
I apologize for the delay but real life work schedule has been a real pain.

I have gotten the proto-type plate completed and installed in our C-10 test section.

This design will be able to be added to a completed painted truck with non welding requred.

There was a minor issue with hinging but I have now revised this so the pan is 99% done.
I am now working on the aluminum light door and hope to have a completed unit shortly.

I'll post some pics as soon as I have the entire unit in place and working properly.

Cheers!
Mickm69

danw210 · 04-15-2013, 10:28 AM

Cool! ^^^

This couldnt come at a better time for me. Any idea of how many you'll have available?
Posted via Mobile Device

HuggerCST · 04-15-2013, 11:08 AM

Thanks Mickm69 for all of the hard work! I know this isn't the most convenient time for you to take on a project like this, but it is appreciated.

sdailey · 04-15-2013, 11:45 AM

Quote:

Originally Posted by HuggerCST

Thanks Mickm69 for all of the hard work! I know this isn't the most convenient time for you to take on a project like this, but it is appreciated.

Thanks to both of you for the effort so far. I'm sure it'll be nice.

Are you taking orders yet?

starfire58 · 04-15-2013, 03:24 PM

Definitely sounds good! I'd like to buy one as soon as they are available! I'm anxiously waiting for this. Awesome design!

RaceAGMC · 04-16-2013, 09:12 PM

Quote:

Originally Posted by starfire58

Definitely sounds good! I'd like to buy one as soon as they are available! I'm anxiously waiting for this. Awesome design!

Me too!
Posted via Mobile Device

bigguy69 · 04-16-2013, 09:20 PM

Im in to!

danw210 · 04-16-2013, 10:06 PM

If you look back at this post there is a bunch of people in line. I hope you make a lot of these. Oh, and if I need to resubmit my "I'm in" then....."I'm in"......again.

cjohnson6772 · 04-16-2013, 11:22 PM

Quote:

Originally Posted by danw210

If you look back at this post there is a bunch of people in line. I hope you make a lot of these. Oh, and if I need to resubmit my "I'm in" then....."I'm in"......again.

I'm in pending pics.
Posted via Mobile Device

HalfTon · 04-16-2013, 11:23 PM

Put me in line too!! Just got the tank under the bed so I'm at the point of running a filler neck too. Thanks for the hard work!!
Posted via Mobile Device

short-t · 04-16-2013, 11:34 PM

Put me down for one. We all can appreciate all the hard work you've put into this project, thank you!
Posted via Mobile Device

Hellbent · 04-18-2013, 03:39 PM

How is this working out for you guys? I am curious to know. There are a few things that worry me with this.

Lights = electricity = possible spark
Gasoline fill = spillage = fumes

Don't get me wrong, this mod scores cool stealthy points, but I would question safety. Legal ramifications would keep me from building a kit for distrubution.
Something to think about...JMO. You guys be careful!

gonnuts · 04-18-2013, 05:15 PM

I'm sure I'll take one too, where to put the filler is the major hang up I have with relocating tank.
Posted via Mobile Device

~Whitey~ · 04-18-2013, 06:17 PM

Quote:

Originally Posted by Hellbent

Lights = electricity = possible spark
Gasoline fill = spillage = fumes

I can't imagine it being any more dangerous than a gas tank in the cab with a hot wire running to it.

Quote:

Originally Posted by gonnuts

I'm sure I'll take one too, where to put the filler is the major hang up I have with relocating tank.
Posted via Mobile Device

Same here. its either this or behind the license plate for me. I wouldn't want to put it in the bed.

Mickm69,

Was it ever post up what you'd charge for this kit? I skimmed back through and couldn't find it.
Posted via Mobile Device

HuggerCST · 04-19-2013, 10:03 AM

Thanks for all of the positive comments guys.

Quote:

Originally Posted by sdailey

Thanks to both of you for the effort so far. I'm sure it'll be nice.

Are you taking orders yet?

No, not yet.

Quote:

Originally Posted by Hellbent

How is this working out for you guys? I am curious to know. There are a few things that worry me with this.

Lights = electricity = possible spark
Gasoline fill = spillage = fumes

Don't get me wrong, this mod scores cool stealthy points, but I would question safety. Legal ramifications would keep me from building a kit for distrubution.
Something to think about...JMO. You guys be careful!

You're right, there is always that possibility, as I have pointed out early in this thread. The LED panel and NON vented cap help decrease the chance of fire, but a person still has to be careful. I never fill mine with any lights on.

Quote:

Originally Posted by ~Whitey~

Was it ever post up what you'd charge for this kit? I skimmed back through and couldn't find it.
Posted via Mobile Device

No, we haven't come up with a price yet.

Mickm69 · 04-19-2013, 05:39 PM

Guys,
I am still tweaking on the tail light filler. I have a couple changes that have raised their head this week that I need to address. The aluminum tail light lens plate proto is completed and it seems like everyting there is good. The issues I am addressing now is proper spacing of the light lens to the truck when hinged and retention values on the assembly when in the closed posture. I will back to working on it next week. There is light at the end of the tunnel at this point and I appreciate everyone's enthusiam and patients.

Now, with this being said, for those of you who are waiting on this design, here are significant modifications required to the internal structure of the drivers side rear bed. Beside drilling mounting holes within the confines of the tail light box, at least two faces will require cutting.

This will not be an exercise where you will simply unscrew the tail light and drill four holes and screw in the new assembly.

Just making you aware and I'll post some pictures as soon as I have a completed unit.

Cheers!
Mickm

7dee2 · 04-22-2013, 12:08 PM

It's great you are putting so much time into this design.

I am sure everyone will appreciate the final product. If you are making a list please add me to it. I agree with the others finding a good place to fill your relocated tank is a pain. Already had a truck with the fill in the bed and it was a PITA to fill.

03-11-2013, 08:01 AM	#151
cjohnson6772 Registered User Join Date: Dec 2010 Location: NC Posts: 666	Re: Tail light fuel filler I found out my engine left the machine shop Friday ao I'll need the filler sooner than I though. Any word? Posted via Mobile Device

03-11-2013, 10:59 AM	#152
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Tail light fuel filler I'm sure it will be an outstanding product! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-26-2013, 05:38 PM	#153
cjohnson6772 Registered User Join Date: Dec 2010 Location: NC Posts: 666	Re: Tail light fuel filler I'm at the point in my project where I desperately need this. Any update? Posted via Mobile Device

03-26-2013, 07:20 PM	#154
danw210 69 K20 Join Date: Mar 2009 Location: Elizabethtown, KY Posts: 426	Re: Tail light fuel filler Me too ^^^^^

03-29-2013, 10:13 PM	#155
Mickm69 Registered User Join Date: Apr 2012 Location: Calhoun, La. Posts: 21	Re: Tail light fuel filler Guys, we have had a small setback with the bending process. I have redesigned in a fashion that should make it feasible to bend without issue. I hope to have a sample this coming week. I'll post results as soon as I have them. Cheers! Mickm69

04-14-2013, 09:54 PM	#157
cjohnson6772 Registered User Join Date: Dec 2010 Location: NC Posts: 666	Re: Tail light fuel filler Bump for an update Posted via Mobile Device

04-15-2013, 09:14 AM	#158
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Tail light fuel filler BUMP>>> __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

04-15-2013, 10:17 AM	#159
Mickm69 Registered User Join Date: Apr 2012 Location: Calhoun, La. Posts: 21	Re: Tail light fuel filler Hi Guys, I apologize for the delay but real life work schedule has been a real pain. I have gotten the proto-type plate completed and installed in our C-10 test section. This design will be able to be added to a completed painted truck with non welding requred. There was a minor issue with hinging but I have now revised this so the pan is 99% done. I am now working on the aluminum light door and hope to have a completed unit shortly. I'll post some pics as soon as I have the entire unit in place and working properly. Cheers! Mickm69

04-15-2013, 10:28 AM	#160
danw210 69 K20 Join Date: Mar 2009 Location: Elizabethtown, KY Posts: 426	Re: Tail light fuel filler Cool! ^^^ This couldnt come at a better time for me. Any idea of how many you'll have available? Posted via Mobile Device

04-15-2013, 11:08 AM	#161
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Tail light fuel filler Thanks Mickm69 for all of the hard work! I know this isn't the most convenient time for you to take on a project like this, but it is appreciated. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-15-2013, 03:24 PM	#163
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: Tail light fuel filler Definitely sounds good! I'd like to buy one as soon as they are available! I'm anxiously waiting for this. Awesome design!

04-16-2013, 09:20 PM	#165
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Tail light fuel filler Im in to! __________________ members met: redbaron69, billsbowtie,nc67

04-16-2013, 10:06 PM	#166
danw210 69 K20 Join Date: Mar 2009 Location: Elizabethtown, KY Posts: 426	Re: Tail light fuel filler If you look back at this post there is a bunch of people in line. I hope you make a lot of these. Oh, and if I need to resubmit my "I'm in" then....."I'm in"......again.

04-16-2013, 11:23 PM	#168
HalfTon Registered User Join Date: Jul 2011 Location: Imperial, MO Posts: 128	Re: Tail light fuel filler Put me in line too!! Just got the tank under the bed so I'm at the point of running a filler neck too. Thanks for the hard work!! Posted via Mobile Device __________________ Put that hammer down and give it hell! 69' custom/10 longbed. 1999 1500 4x4 5 speed

04-16-2013, 11:34 PM	#169
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 324	Re: Tail light fuel filler Put me down for one. We all can appreciate all the hard work you've put into this project, thank you! Posted via Mobile Device __________________ 1968 C10 LS2/4L70e swb fleet side. ECE front disk conversion and 3.5/5 drop. SOLD. 1968 C20 Custom Camper 396 50th survivor! SOLD to northerngmc



Register or Log In To remove these advertisements.

04-18-2013, 03:39 PM	#170
Hellbent Don't blame the messenger Join Date: Nov 2009 Location: Summerville, SC Posts: 318	Re: Tail light fuel filler How is this working out for you guys? I am curious to know. There are a few things that worry me with this. Lights = electricity = possible spark Gasoline fill = spillage = fumes Don't get me wrong, this mod scores cool stealthy points, but I would question safety. Legal ramifications would keep me from building a kit for distrubution. Something to think about...JMO. You guys be careful! __________________ On the Level Just a guy with a hammer and a grinder. OH!, and an HOA- enough said...: http://67-72chevytrucks.com/vboard/s...d.php?t=372525 "Some drink from the fountain of knowledge while others just gargle."

04-18-2013, 05:15 PM	#171
gonnuts Registered User Join Date: Sep 2010 Location: Langdon, Ab Posts: 348	Re: Tail light fuel filler I'm sure I'll take one too, where to put the filler is the major hang up I have with relocating tank. Posted via Mobile Device __________________ 67 Chev SWB, 400 SB .040 over, vortec heads, comp XE268 cam, performer EPS intake, edel. 650 AVS carb, 700R4

04-19-2013, 05:39 PM	#174
Mickm69 Registered User Join Date: Apr 2012 Location: Calhoun, La. Posts: 21	Re: Tail light fuel filler Guys, I am still tweaking on the tail light filler. I have a couple changes that have raised their head this week that I need to address. The aluminum tail light lens plate proto is completed and it seems like everyting there is good. The issues I am addressing now is proper spacing of the light lens to the truck when hinged and retention values on the assembly when in the closed posture. I will back to working on it next week. There is light at the end of the tunnel at this point and I appreciate everyone's enthusiam and patients. Now, with this being said, for those of you who are waiting on this design, here are significant modifications required to the internal structure of the drivers side rear bed. Beside drilling mounting holes within the confines of the tail light box, at least two faces will require cutting. This will not be an exercise where you will simply unscrew the tail light and drill four holes and screw in the new assembly. Just making you aware and I'll post some pictures as soon as I have a completed unit. Cheers! Mickm

04-22-2013, 12:08 PM	#175
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,890	Re: Tail light fuel filler It's great you are putting so much time into this design. I am sure everyone will appreciate the final product. If you are making a list please add me to it. I agree with the others finding a good place to fill your relocated tank is a pain. Already had a truck with the fill in the bed and it was a PITA to fill. __________________ Brett 67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594 72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.) 72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614 YouTube: https://www.youtube.com/@6dee7-7dee2

Register or Log In To remove these advertisements.