Best place to get sheetmetal? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scrubby · 11-03-2003, 12:22 AM

I need the driver's side floor and a couple other pieces of sheetmetal for my '71 jimmy. What is the best place to order from?

Also, do they make a patch panel for the lower front fenders? Looks like mine were cut by the original bumper or something.

blaz72 · 11-03-2003, 08:51 PM

you can use LMC,CHEVY DUTY all have good parts and free catalogs.

chiphayes · 11-03-2003, 10:23 PM

ive dealt with gms pauls for a few years now,and they are my parts vendor now.very honest and knowledgable,great to deal with

**GMCPaul** · 11-04-2003, 03:07 AM

There is a lower rear front fender patch available, its not 100% exact though, there is a approx. 1/8" wide rolled bead on the wheel arch opening edge thats not found on the reproduction patch panel so in order to achieve a 100% original look installed you need to use a bead roller to make this indentation on the panel otherwise form & fit are correct. Thanks for the recommendation Chip hows the Blazer coming??? Sure these guys would love to see pics of the rocker box install & new doors.

Oops I commented on the rear section you were referring to the front fender cup, this parts 100% correct and has the rolled bead. It is however available for only the right front side.
GMCPaul

chiphayes · 11-04-2003, 07:54 AM

blazer is coming very slowly,i am self employed,and have been so busy,which is a good thing.i need to get to your place and get some stuff.lower front fender cup,is it in ?

**GMCPaul** · 11-04-2003, 08:12 AM

LOL Chip I know all about self-employed and having little extra time, my day started at 11pm last night, was able to do some web site updates, add several new products to site and pictures, downloaded online orders, updated ebay auctions, and balanced the ledger so far, still have inventory to take, parts orders to place with suppliers, a large delivery to make about 2 hours away plus pull and ship a dozen or so orders. I'm glad its a slow day

The cups are due in Wed. , Thursday at latest. Glad to hear your busy!!!!
GMCPaul

Blue Beard · 11-04-2003, 09:12 AM

I've had good luck with Goodmark..........

11-03-2003, 12:22 AM	#1
Scrubby Check out GMTrucks.org Join Date: Sep 2003 Location: Boise, Id Posts: 284	Best place to get sheetmetal? I need the driver's side floor and a couple other pieces of sheetmetal for my '71 jimmy. What is the best place to order from? Also, do they make a patch panel for the lower front fenders? Looks like mine were cut by the original bumper or something.

11-04-2003, 03:07 AM	#4
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	There is a lower rear front fender patch available, its not 100% exact though, there is a approx. 1/8" wide rolled bead on the wheel arch opening edge thats not found on the reproduction patch panel so in order to achieve a 100% original look installed you need to use a bead roller to make this indentation on the panel otherwise form & fit are correct. Thanks for the recommendation Chip hows the Blazer coming??? Sure these guys would love to see pics of the rocker box install & new doors. Oops I commented on the rear section you were referring to the front fender cup, this parts 100% correct and has the rolled bead. It is however available for only the right front side. GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM Last edited by GMCPaul; 11-04-2003 at 03:09 AM.

11-04-2003, 08:12 AM	#6
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	LOL Chip I know all about self-employed and having little extra time, my day started at 11pm last night, was able to do some web site updates, add several new products to site and pictures, downloaded online orders, updated ebay auctions, and balanced the ledger so far, still have inventory to take, parts orders to place with suppliers, a large delivery to make about 2 hours away plus pull and ship a dozen or so orders. I'm glad its a slow day The cups are due in Wed. , Thursday at latest. Glad to hear your busy!!!! GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

11-04-2003, 09:12 AM	#7
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	I've had good luck with Goodmark.......... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

11-03-2003, 08:51 PM	#2
blaz72 Registered User Join Date: Oct 2003 Location: connecticut Posts: 21	you can use LMC,CHEVY DUTY all have good parts and free catalogs.

11-03-2003, 10:23 PM	#3
chiphayes Registered User Join Date: Jan 2003 Location: indiana Posts: 186	ive dealt with gms pauls for a few years now,and they are my parts vendor now.very honest and knowledgable,great to deal with

11-04-2003, 07:54 AM	#5
chiphayes Registered User Join Date: Jan 2003 Location: indiana Posts: 186	blazer is coming very slowly,i am self employed,and have been so busy,which is a good thing.i need to get to your place and get some stuff.lower front fender cup,is it in ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.