KS parting a 67 chevy CST - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange 69 · 11-25-2012, 05:49 PM

Quote:

Originally Posted by teeitup

orange 69, I have 2 sets both are original tinted, one set has extra tint on it that would need removed. Here is one set

Randy, I will take the best set (you choose) the seal issue is no problem, i will rebuild them.

Can you PM me payment info please

**Elliot949** · 11-25-2012, 06:09 PM

Hey Randy... is the Glove box door still available?... if so I will take it pending shipping to 67156

teeitup · 11-25-2012, 07:55 PM

68panelman, MIke, I will get it off this week and get you a quote

Orange 69, Joe, I'll pm you info

Elliot949, Dan $35 shipped for it

Thanks Randy

**Elliot949** · 11-25-2012, 07:56 PM

ok... will get a check in the mail to you... PM me your address again...

RRC · 11-25-2012, 08:47 PM

Randy I would like another pic of the air cleaner,from the side please. It looks like it might be rusty.if so are there any holes? Thanks Russ
Posted via Mobile Device

RRC · 11-25-2012, 08:49 PM

And how much to ship to Canada? I can pm my address.
Posted via Mobile Device

teeitup · 11-25-2012, 08:54 PM

Russ, I will get more pics Mon after work. I don't think its rusty, might be some surface rust but no rot. I'll ship to Canada, I will have to get a box and get a measurement and wieght. Thanks Randy

RRC · 11-25-2012, 08:58 PM

Thanks. Randy,let me know if you need the address. You need a money order right? Russ
Posted via Mobile Device

j ripper · 11-25-2012, 09:33 PM

Randy, is the parking brake cover spoken for? Also in need of some kick panel vent doors with nice gaskets. They would be for a 67 with a/c. Not sure if they are any diff other than diaphragm dash pot thingy on pass side.
Posted via Mobile Device

teeitup · 11-25-2012, 10:04 PM

RRC, Russ, I'll pm you total hopefully Mon and more pics

j ripper, Parking brake cover is still for sale $28 shipped. Sorry I don't have any 67 AC kick panel vents right now

j ripper · 11-25-2012, 10:15 PM

Does the cover come with the mounting screws?
Posted via Mobile Device

teeitup · 11-25-2012, 10:18 PM

I don't think I have them, the cover was under the seat when I took the seat out

j ripper · 11-25-2012, 10:24 PM

Ok thanks randy, I'm gonna think about it.
Posted via Mobile Device

*Puropedo* · 11-25-2012, 10:48 PM

Hey Randy, let me know if the 68 steering wheel is still available, thx... Juanito

**Elliot949** · 11-25-2012, 10:53 PM

Hey Randy... How much for the complete bucket seat setup... I would just pick it up...

**88JRFAN** · 11-25-2012, 11:57 PM

Did the tailgate go with the bed? Thanks

teeitup · 11-26-2012, 01:30 AM

j ripper, OK let me know

puropedo, Juanito, I'll send info and sorry wheel is sold already

Dan, sorry they are sold already

Daren, yes it sold with bed, sorry

Thanks Randy

**Elliot949** · 11-26-2012, 07:45 AM

No Problem Randy... Thanks...

**88JRFAN** · 11-26-2012, 08:58 PM

Thought i would ask. Thanks

teeitup · 11-26-2012, 09:17 PM

Thanks Dan

Thanks Daren

RRC, Russ, I still have to go out and get pics, I will try for a quote Tues, time got away from me today

Thanks Randy

teeitup · 11-26-2012, 10:28 PM

Russ, one ding in top, 2nd pic and end of it needs straightened. Let me know if still interested and I'll get a quote

yellowGT · 11-27-2012, 12:47 AM

how much for the dash pad? 75040

**Elliot949** · 11-27-2012, 08:26 AM

Payment sent for the glovebox door...

RRC · 11-27-2012, 02:32 PM

I will take it . Get me a price on shipping.
Posted via Mobile Device

teeitup · 11-27-2012, 08:37 PM

yellowgt, its not any good, sorry

Dan, sounds good

Ruass, I will take it USPS Wed after work and get a quote for you

Thanks Randy

11-25-2012, 06:09 PM	#102
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy CST Hey Randy... is the Glove box door still available?... if so I will take it pending shipping to 67156

11-25-2012, 07:55 PM	#103
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy CST 68panelman, MIke, I will get it off this week and get you a quote Orange 69, Joe, I'll pm you info Elliot949, Dan $35 shipped for it Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2012, 07:56 PM	#104
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy CST ok... will get a check in the mail to you... PM me your address again...

11-25-2012, 08:47 PM	#105
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: parting a 67 chevy CST Randy I would like another pic of the air cleaner,from the side please. It looks like it might be rusty.if so are there any holes? Thanks Russ Posted via Mobile Device

11-25-2012, 08:49 PM	#106
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: parting a 67 chevy CST And how much to ship to Canada? I can pm my address. Posted via Mobile Device

11-25-2012, 08:54 PM	#107
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy CST Russ, I will get more pics Mon after work. I don't think its rusty, might be some surface rust but no rot. I'll ship to Canada, I will have to get a box and get a measurement and wieght. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2012, 08:58 PM	#108
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: parting a 67 chevy CST Thanks. Randy,let me know if you need the address. You need a money order right? Russ Posted via Mobile Device

11-25-2012, 09:33 PM	#109
j ripper Registered User Join Date: Jul 2010 Location: napa ca. Posts: 199	Re: parting a 67 chevy CST Randy, is the parking brake cover spoken for? Also in need of some kick panel vent doors with nice gaskets. They would be for a 67 with a/c. Not sure if they are any diff other than diaphragm dash pot thingy on pass side. Posted via Mobile Device __________________ edited by staff

11-25-2012, 10:04 PM	#110
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy CST RRC, Russ, I'll pm you total hopefully Mon and more pics j ripper, Parking brake cover is still for sale $28 shipped. Sorry I don't have any 67 AC kick panel vents right now __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2012, 10:15 PM	#111
j ripper Registered User Join Date: Jul 2010 Location: napa ca. Posts: 199	Re: parting a 67 chevy CST Does the cover come with the mounting screws? Posted via Mobile Device __________________ edited by staff

11-25-2012, 10:18 PM	#112
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy CST I don't think I have them, the cover was under the seat when I took the seat out __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2012, 10:24 PM	#113
j ripper Registered User Join Date: Jul 2010 Location: napa ca. Posts: 199	Re: parting a 67 chevy CST Ok thanks randy, I'm gonna think about it. Posted via Mobile Device __________________ edited by staff

11-25-2012, 10:48 PM	#114
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: parting a 67 chevy CST Hey Randy, let me know if the 68 steering wheel is still available, thx... Juanito

11-25-2012, 10:53 PM	#115
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy CST Hey Randy... How much for the complete bucket seat setup... I would just pick it up...

11-25-2012, 11:57 PM	#116
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting a 67 chevy CST Did the tailgate go with the bed? Thanks __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM



Register or Log In To remove these advertisements.

11-26-2012, 01:30 AM	#117
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy CST j ripper, OK let me know puropedo, Juanito, I'll send info and sorry wheel is sold already Dan, sorry they are sold already Daren, yes it sold with bed, sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-26-2012, 07:45 AM	#118
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy CST No Problem Randy... Thanks...

11-26-2012, 08:58 PM	#119
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting a 67 chevy CST Thought i would ask. Thanks __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

11-26-2012, 09:17 PM	#120
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy CST Thanks Dan Thanks Daren RRC, Russ, I still have to go out and get pics, I will try for a quote Tues, time got away from me today Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-26-2012, 10:28 PM	#121
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy CST Russ, one ding in top, 2nd pic and end of it needs straightened. Let me know if still interested and I'll get a quote Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-27-2012, 12:47 AM	#122
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: parting a 67 chevy CST how much for the dash pad? 75040 __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

11-27-2012, 08:26 AM	#123
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy CST Payment sent for the glovebox door...

11-27-2012, 02:32 PM	#124
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: parting a 67 chevy CST I will take it . Get me a price on shipping. Posted via Mobile Device

11-27-2012, 08:37 PM	#125
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy CST yellowgt, its not any good, sorry Dan, sounds good Ruass, I will take it USPS Wed after work and get a quote for you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.