OR 1972 suburban parts and cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bcfishon** · 04-06-2020, 06:24 PM

I've never posted to sell parts and did not plan to but this suburban fell into my possession and I have no use for it but could not pass it up. I will cut up what someone wants and have some various pieces but not too much. Have never shipped before but willing to learn a new trick so if you see something you need holler and I will shoot numbers and will ship with your assistance. po cut off roof and wacked the pillars.and firewall.

*randy500* · 04-06-2020, 06:33 PM

Price on the rh B pillar? Picked up

**bcfishon** · 04-06-2020, 07:13 PM

Quote:

Originally Posted by randy500

Price on the rh B pillar? Picked up

How about $40

**71blksuper4x4** · 04-06-2020, 07:13 PM

Is there a window left in the fake door? Is it a green tinted one?

*randy500* · 04-06-2020, 07:14 PM

Quote:

Originally Posted by bcfishon

How about $40

I will take it.
Traveling down your way next week probably.

**71blksuper4x4** · 04-06-2020, 07:16 PM

How rusty is the cab mounts that connect to the b pillars?

*randy500* · 04-06-2020, 07:22 PM

I need the “B” pillar cut at the roof rail and down through the front and rear rockers, if you can save the floor support for Trevor thats fine. I think it connects behind the pillar.

**bcfishon** · 04-06-2020, 08:24 PM

Quote:

Originally Posted by randy500

I will take it.
Traveling down your way next week probably.

Pm sent

**bcfishon** · 04-06-2020, 08:26 PM

Quote:

Originally Posted by 71blksuper4x4

Is there a window left in the fake door? Is it a green tinted one?

Yes

Disastro · 04-06-2020, 08:27 PM

What's the condition of the rear sill? (Panel that the tailgate bolts to.)

**ShortbedClayton** · 04-06-2020, 08:34 PM

Can I get some close ups of the circled areas? Need the upper edges to finish off my crew cab 4 th door side. Need at least 24”
Posted via Mobile Device

**bcfishon** · 04-06-2020, 08:34 PM

Quote:

Originally Posted by 71blksuper4x4

How rusty is the cab mounts that connect to the b pillars?

I'll look closer for you

**ShortbedClayton** · 04-06-2020, 08:40 PM

Also interested in the false door window regulaor
Posted via Mobile Device

**bcfishon** · 04-06-2020, 08:45 PM

Quote:

Originally Posted by ShortbedClayton

Can I get some close ups of the circled areas? Need the upper edges to finish off my crew cab 4 th door side. Need at least 24”
Posted via Mobile Device

I snapped these.real.quick

*randy500* · 04-06-2020, 08:47 PM

I need the entire B pillar as marked.

**bcfishon** · 04-06-2020, 08:48 PM

Quote:

Originally Posted by ShortbedClayton

Also interested in the false door window regulaor
Posted via Mobile Device

I will look at it,could not get that window to roll either way but it may just need a little spray and motion,it's on my list sir

**ShortbedClayton** · 04-06-2020, 08:50 PM

Quote:

Originally Posted by bcfishon

I snapped these.real.quick

I need infront of that false side basically where the door seal glued to put to the drip edge. Cut flush off with the solid fake side.. and as much of what’s left after removing the b pillar for randy.. price?
Posted via Mobile Device

**ShortbedClayton** · 04-06-2020, 08:52 PM

Sorry to be confusing but it’s hard to explain.. no rush on my part. Thank you..
Posted via Mobile Device

**bcfishon** · 04-06-2020, 08:54 PM

Quote:

Originally Posted by randy500

I need the entire B pillar as marked.

Randy,
Here are some pictures of that piece ,take a gander and if you want it it's yours

*randy500* · 04-06-2020, 09:01 PM

Quote:

Originally Posted by bcfishon

Randy,
Here are some pictures of that piece ,take a gander and if you want it it's yours

Its useable for my purpose, cut the rear rocker panel like the front one and then the floor. Which is through that floor support, unless you want to dissect the bottom So Trevor can get the floor support (best idea)
Just cut the top at each side of the top rail so clayton can get his top rail piece.

*randy500* · 04-06-2020, 09:02 PM

The 6. Bolts loosen up things on the floor support but its also spot welded, prob can separate it with an air chisel.

**bcfishon** · 04-06-2020, 09:18 PM

Quote:

Originally Posted by Disastro

What's the condition of the rear sill? (Panel that the tailgate bolts to.)

It has some scale but hasn't gone through anywhere,it has a dent on the edge but bad, would use it if I needed one.

**bcfishon** · 04-06-2020, 09:24 PM

Quote:

Originally Posted by randy500

Its useable for my purpose, cut the rear rocker panel like the front one and then the floor. Which is through that floor support, unless you want to dissect the bottom So Trevor can get the floor support (best idea)
Just cut the top at each side of the top rail so clayton can get his top rail piece.

I actually understood that and it's in my skill range,your name is on it

**bcfishon** · 04-06-2020, 09:28 PM

Quote:

Originally Posted by ShortbedClayton

Sorry to be confusing but it’s hard to explain.. no rush on my part. Thank you..
Posted via Mobile Device

Here are some more,let me know if you need some more sir.

**bcfishon** · 04-06-2020, 09:32 PM

Quote:

Originally Posted by bcfishon

Here are some more,let me know if you need some more sir.

And more

04-06-2020, 06:24 PM	#1
bcfishon Senior Member Join Date: Nov 2012 Location: canby,oregon Posts: 351	1972 suburban parts and cuts I've never posted to sell parts and did not plan to but this suburban fell into my possession and I have no use for it but could not pass it up. I will cut up what someone wants and have some various pieces but not too much. Have never shipped before but willing to learn a new trick so if you see something you need holler and I will shoot numbers and will ship with your assistance. po cut off roof and wacked the pillars.and firewall. Attached Images

04-06-2020, 06:33 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 1972 suburban parts and cuts Price on the rh B pillar? Picked up

04-06-2020, 07:13 PM	#4
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: 1972 suburban parts and cuts Is there a window left in the fake door? Is it a green tinted one? __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-06-2020, 07:16 PM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: 1972 suburban parts and cuts How rusty is the cab mounts that connect to the b pillars? __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-06-2020, 07:22 PM	#7
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 1972 suburban parts and cuts I need the “B” pillar cut at the roof rail and down through the front and rear rockers, if you can save the floor support for Trevor thats fine. I think it connects behind the pillar.

04-06-2020, 08:27 PM	#10
Disastro Registered User Join Date: Feb 2018 Location: Granville Ohio Posts: 34	Re: 1972 suburban parts and cuts What's the condition of the rear sill? (Panel that the tailgate bolts to.)

04-06-2020, 08:34 PM	#11
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 677	Can I get some close ups of the circled areas? Need the upper edges to finish off my crew cab 4 th door side. Need at least 24” Posted via Mobile Device Attached Images

04-06-2020, 08:40 PM	#13
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 677	Re: 1972 suburban parts and cuts Also interested in the false door window regulaor Posted via Mobile Device

04-06-2020, 08:47 PM	#15
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 1972 suburban parts and cuts I need the entire B pillar as marked. Attached Images

04-06-2020, 08:52 PM	#18
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 677	Sorry to be confusing but it’s hard to explain.. no rush on my part. Thank you.. Posted via Mobile Device Attached Images

04-06-2020, 09:02 PM	#21
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 1972 suburban parts and cuts The 6. Bolts loosen up things on the floor support but its also spot welded, prob can separate it with an air chisel.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.