Dually wheel air valves - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 12-04-2020, 06:05 PM

What have you guy's used for the rear dually wheels for putting air in them? I had to take my simulators off to get to the valve stems. I want something that will work without taking them off the next time.

**LockDoc** · 12-04-2020, 06:27 PM

-
I don't have a picture on my computer but mine are flexible rubber and they clip onto the edge of the cutout in the rim.

Here are some flex ones on eBay. They come in different lengths and styles.

https://www.ebay.com/itm/2-STEEL-DUA...-/281490252274

LockDoc

Andy4639 · 12-04-2020, 09:43 PM

Quote:

Originally Posted by LockDoc

-
I don't have a picture on my computer but mine are flexible rubber and they clip onto the edge of the cutout in the rim.

Here are some flex ones on eBay. They come in different lengths and styles.

https://www.ebay.com/itm/2-STEEL-DUA...-/281490252274

LockDoc

How do they attach? At the opening where the valve is are on the rim edge?
I was looking at the ones I posted but I may try a local shop next week on I-85 when I go over to the LKQ yard to look for some parts.

**kwmech** · 12-04-2020, 09:56 PM

Just use the short rubber valves and use a long solid air chuck with the angled foot on it. The less places to leak the better.

Andy4639 · 12-04-2020, 10:19 PM

Quote:

Originally Posted by kwmech

Just use the short rubber valves and use a long solid air chuck with the angled foot on it. The less places to leak the better.

The problem is with the simulators on the wheels I can't reach them. The holes in the simulators are much smaller. The wheel opening is fine but I don't want to have to take them off every time to check the pressure.

**LockDoc** · 12-04-2020, 10:26 PM

Quote:

Originally Posted by Andy4639

How do they attach? At the opening where the valve is are on the rim edge?
I was looking at the ones I posted but I may try a local shop next week on I-85 when I go over to the LKQ yard to look for some parts.

In one of the openings in the center.

LockDoc

**truckster** · 12-04-2020, 10:59 PM

I've used both the metal extenders and the flexible ones (anchored to a wheel hub on a 29,000 lb motor home). Both work OK. The flexible ones are a little easier in my opinion.

Andy4639 · 12-05-2020, 10:37 AM

Yes after seeing this and looking the flexable ones look to be better.
YEHAM 2pcs Stainless Steel 7"/180mm Tyre Tire Valve Stem Extension Adaptors Car Truck Trailer RV Trailer Vehicle
100% Brand new and high quality
Reliable and durable:Made of copper nut and 304 stainless steel braided flexible hose with an aluminum alloy clip to fix the adapter
Fit for trucks, RVs, campers, trailers, or other heavy vehicles
Universal Type, Work With Tire Valve Directly, Have A Clamp / Fastener To Work Directly with Dual Wheel. Easy Work.
Length: approx.180 mm. 7" long

SCOTI · 12-05-2020, 01:05 PM

Seems like those extras would impact the balance.

I just pop the caps off but I don't check mine that often so it's never been a concern.

Andy4639 · 12-05-2020, 04:16 PM

Quote:

Originally Posted by SCOTI

Seems like those extras would impact the balance.

I just pop the caps off but I don't check mine that often so it's never been a concern.

Good point on the balance of the wheel. I don't really like taking the simulators off to much because that is why you lose hub caps. The tangs get worn and loose.

**oldwagon** · 12-06-2020, 01:30 PM

Thanks for this info. I have been thinking about something like this myself.

**truckster** · 12-06-2020, 02:25 PM

Quote:

Originally Posted by SCOTI

Seems like those extras would impact the balance.

I just pop the caps off but I don't check mine that often so it's never been a concern.

Keep them close to the hub. There's much less impact on the balance that way.

Andy4639 · 12-06-2020, 04:09 PM

Quote:

Originally Posted by truckster

Keep them close to the hub. There's much less impact on the balance that way.

12-04-2020, 06:05 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Dually wheel air valves What have you guy's used for the rear dually wheels for putting air in them? I had to take my simulators off to get to the valve stems. I want something that will work without taking them off the next time. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-04-2020, 06:27 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,329	Re: Dually wheel air valves - I don't have a picture on my computer but mine are flexible rubber and they clip onto the edge of the cutout in the rim. Here are some flex ones on eBay. They come in different lengths and styles. https://www.ebay.com/itm/2-STEEL-DUA...-/281490252274 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-04-2020, 09:56 PM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,389	Re: Dually wheel air valves Just use the short rubber valves and use a long solid air chuck with the angled foot on it. The less places to leak the better.

12-04-2020, 10:59 PM	#7
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,795	Re: Dually wheel air valves I've used both the metal extenders and the flexible ones (anchored to a wheel hub on a 29,000 lb motor home). Both work OK. The flexible ones are a little easier in my opinion. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

12-05-2020, 10:37 AM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Dually wheel air valves Yes after seeing this and looking the flexable ones look to be better. YEHAM 2pcs Stainless Steel 7"/180mm Tyre Tire Valve Stem Extension Adaptors Car Truck Trailer RV Trailer Vehicle 100% Brand new and high quality Reliable and durable:Made of copper nut and 304 stainless steel braided flexible hose with an aluminum alloy clip to fix the adapter Fit for trucks, RVs, campers, trailers, or other heavy vehicles Universal Type, Work With Tire Valve Directly, Have A Clamp / Fastener To Work Directly with Dual Wheel. Easy Work. Length: approx.180 mm. 7" long __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-05-2020, 01:05 PM	#9
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	Re: Dually wheel air valves Seems like those extras would impact the balance. I just pop the caps off but I don't check mine that often so it's never been a concern. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-06-2020, 01:30 PM	#11
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 753	Re: Dually wheel air valves Thanks for this info. I have been thinking about something like this myself.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.