1970 C-10 Stepside Build Progress Thread - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ol Blue K20** · 04-06-2020, 10:14 AM

Wow! You're making some great progress. Keep it up.

**raggedjim** · 04-06-2020, 10:35 AM

Nice, Are you going single stage on the exterior?

Thanks, Rg

sircrunch · 04-06-2020, 11:46 AM

Quote:

Originally Posted by raggedjim

Nice, Are you going single stage on the exterior?

Thanks, Rg

This color is totally non-metallic solid, and the single stage can be wetsanded, cut, and buffed. and is a light color... AND i have a lot extra left over. so YES i think i will spray it all single stage. opinions?

**raggedjim** · 04-06-2020, 01:51 PM

Quote:

Originally Posted by sircrunch

This color is totally non-metallic solid, and the single stage can be wetsanded, cut, and buffed. and is a light color... AND i have a lot extra left over. so YES i think i will spray it all single stage. opinions?

I think it's a good call, I plan to do the same 503 green with an ivory two-tone and I'm planning single stage also.

Good luck, Rg

FRCvette · 04-06-2020, 09:40 PM

What radiator are you using?

sircrunch · 04-06-2020, 09:45 PM

Quote:

Originally Posted by FRCvette

What radiator are you using?

From ebay seller autocity1958 looks like it's out of stock

sircrunch · 04-29-2020, 10:51 AM

started painting the outside. we messed up a little. but its fixable. started painting the white and realized it was reduced too much. so only got one coat of white on it, wanted to let it dry really good so we could sand it and recoat it with properly mixed paint. so we moved on to the gm code 503 light green. we werent worried about masking the roof because of course it will be redone. The rest of the truck should be painted within the next 2 or 3 weeks.

70 shorty · 04-29-2020, 08:22 PM

Love the color combo. Even though you've made your choice, I'll add in that my Corvette was sprayed in single stage black, no metallic or anything else and it's held up great for 15 years so far. It is 100% garage kept though, so I cant speak to it's longevity if you plan to keep in outside. Great progress you're making though!

Chevys4life · 04-30-2020, 12:18 PM

Subscribed.........nice progress

Tupper81 · 05-01-2020, 08:22 AM

holy crap dont sawzall it pull the the whole switch out drill a hole use pliers remove the ignition cylinder buy replacement easy job

sircrunch · 05-01-2020, 08:42 AM

Quote:

Originally Posted by Tupper81

holy crap dont sawzall it pull the the whole switch out drill a hole use pliers remove the ignition cylinder buy replacement easy job

Hey buddy the Ignition problem was resolved 3 years ago. Thanks though

**1971Stepside** · 05-01-2020, 09:10 AM

Paint just makes it better. Following along. Keep pushing

sircrunch · 05-18-2020, 02:48 PM

truck is painted! turned out great! i did it myself with a friend in my garage. we put the bed part of the way together the next day. we have also started wiring the LS engine.

**Ol Blue K20** · 05-18-2020, 03:04 PM

You did great, it looks good.

**paul blair** · 05-18-2020, 04:24 PM

Looking Good. You have come a long way. Keep the caps and the wheels.

El Dorado Jim · 05-18-2020, 06:04 PM

looks great!

sircrunch · 07-07-2020, 02:19 PM

newest pics of my progress:

70 shorty · 07-07-2020, 05:53 PM

Looking great! I'm damn sure jealous of how nice the truck looks. Love everything about it. I do think I'd rock the 4 different wheels with the matching paint on the one

gmc684x4 · 07-07-2020, 06:19 PM

Very nice truck
What is the bench seat from ?

**lolife99** · 07-07-2020, 08:36 PM

Very nice!

**Ol Blue K20** · 07-08-2020, 07:28 AM

Looks fantastic!

sircrunch · 07-10-2020, 09:05 AM

Quote:

Originally Posted by gmc684x4

Very nice truck
What is the bench seat from ?

its from LMC

**1971Stepside** · 07-10-2020, 09:35 AM

Truck looks great! Always like to see another stepper rolling off the "assembly" line.

**cericd** · 07-10-2020, 11:09 AM

Great to see you using the one year only, 1970 grill insert. Did it come with the truck and you just freshened it up or did you find a NOS one?

sircrunch · 07-14-2020, 11:19 AM

i bought it used and painted it up. i did a video and put it on youtube on how i did it. https://www.youtube.com/watch?v=qAfYepyFDOQ

04-06-2020, 10:14 AM	#76
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 1970 C-10 Stepside Build Progress Thread Wow! You're making some great progress. Keep it up. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

04-06-2020, 10:35 AM	#77
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,367	Re: 1970 C-10 Stepside Build Progress Thread Nice, Are you going single stage on the exterior? Thanks, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd

04-06-2020, 09:40 PM	#80
FRCvette Registered User Join Date: Mar 2007 Location: cincy Posts: 694	Re: 1970 C-10 Stepside Build Progress Thread What radiator are you using? __________________ There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb

04-29-2020, 10:51 AM	#82
sircrunch Registered User Join Date: Apr 2016 Location: Anderson, SC Posts: 160	Re: 1970 C-10 Stepside Build Progress Thread started painting the outside. we messed up a little. but its fixable. started painting the white and realized it was reduced too much. so only got one coat of white on it, wanted to let it dry really good so we could sand it and recoat it with properly mixed paint. so we moved on to the gm code 503 light green. we werent worried about masking the roof because of course it will be redone. The rest of the truck should be painted within the next 2 or 3 weeks.

04-29-2020, 08:22 PM	#83
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	Re: 1970 C-10 Stepside Build Progress Thread Love the color combo. Even though you've made your choice, I'll add in that my Corvette was sprayed in single stage black, no metallic or anything else and it's held up great for 15 years so far. It is 100% garage kept though, so I cant speak to it's longevity if you plan to keep in outside. Great progress you're making though! __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

04-30-2020, 12:18 PM	#84
Chevys4life Registered User Join Date: Jun 2018 Location: Washington, DC Posts: 638	Re: 1970 C-10 Stepside Build Progress Thread Subscribed.........nice progress

05-01-2020, 08:22 AM	#85
Tupper81 Registered User Join Date: Dec 2019 Location: Beaman Posts: 12	Re: 1970 C-10 Stepside Build Progress Thread holy crap dont sawzall it pull the the whole switch out drill a hole use pliers remove the ignition cylinder buy replacement easy job

05-01-2020, 09:10 AM	#87
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: 1970 C-10 Stepside Build Progress Thread Paint just makes it better. Following along. Keep pushing __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

05-18-2020, 02:48 PM	#88
sircrunch Registered User Join Date: Apr 2016 Location: Anderson, SC Posts: 160	Re: 1970 C-10 Stepside Build Progress Thread truck is painted! turned out great! i did it myself with a friend in my garage. we put the bed part of the way together the next day. we have also started wiring the LS engine.

05-18-2020, 03:04 PM	#89
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 1970 C-10 Stepside Build Progress Thread You did great, it looks good. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

05-18-2020, 04:24 PM	#90
paul blair Senior Member Join Date: Jan 2016 Location: massachusetts Posts: 326	Re: 1970 C-10 Stepside Build Progress Thread Looking Good. You have come a long way. Keep the caps and the wheels.

05-18-2020, 06:04 PM	#91
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: 1970 C-10 Stepside Build Progress Thread looks great!

07-07-2020, 02:19 PM	#92
sircrunch Registered User Join Date: Apr 2016 Location: Anderson, SC Posts: 160	Re: 1970 C-10 Stepside Build Progress Thread newest pics of my progress: Last edited by sircrunch; 07-10-2020 at 09:00 AM.

07-07-2020, 05:53 PM	#93
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	Re: 1970 C-10 Stepside Build Progress Thread Looking great! I'm damn sure jealous of how nice the truck looks. Love everything about it. I do think I'd rock the 4 different wheels with the matching paint on the one __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

07-07-2020, 06:19 PM	#94
gmc684x4 Registered User Join Date: Jul 2012 Location: Whitehorse yukon Posts: 1,218	Re: 1970 C-10 Stepside Build Progress Thread Very nice truck What is the bench seat from ?



Register or Log In To remove these advertisements.

07-07-2020, 08:36 PM	#95
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,681	Re: 1970 C-10 Stepside Build Progress Thread Very nice! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-08-2020, 07:28 AM	#96
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 1970 C-10 Stepside Build Progress Thread Looks fantastic! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

07-10-2020, 09:35 AM	#98
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: 1970 C-10 Stepside Build Progress Thread Truck looks great! Always like to see another stepper rolling off the "assembly" line. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-10-2020, 11:09 AM	#99
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,088	Re: 1970 C-10 Stepside Build Progress Thread Great to see you using the one year only, 1970 grill insert. Did it come with the truck and you just freshened it up or did you find a NOS one? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

07-14-2020, 11:19 AM	#100
sircrunch Registered User Join Date: Apr 2016 Location: Anderson, SC Posts: 160	Re: 1970 C-10 Stepside Build Progress Thread i bought it used and painted it up. i did a video and put it on youtube on how i did it. https://www.youtube.com/watch?v=qAfYepyFDOQ

Register or Log In To remove these advertisements.