|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-03-2014, 03:17 AM
|
#1 |
|
Registered User
Join Date: Jan 2012
Location: Oklahoma City, Oklahoma
Posts: 114
|
factory aluminum wheel
I would appreciate any info on the factory aluminum wheels that were an option on our trucks. The ones in question I believe have 8 holes and accept the same center caps that the rally wheels do. I would also appreciate the rpo code.
__________________
Rally 'round the family....with a pocket full of shells. |
|
|
|
08-03-2014, 09:03 AM
|
#2 |
|
Registered User
Join Date: Oct 2010
Location: Ocean Springs, MS
Posts: 1,746
|
Re: factory aluminum wheel
They are forged aluminum, 15x7, I don't have the code.
__________________
Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100 |
|
|
|
|
08-03-2014, 10:46 AM
|
#3 |
|
Getting Old; Going Broke
Join Date: Apr 2010
Location: Owasso OK
Posts: 2,764
|
Re: factory aluminum wheel
Off a 91 I parted a few years ago, is the best help I can offer quickly.
__________________
Why is every used 350 sbc out of a corvette? There's only two things that excite a man, expensive toys and real expensive toys. VEGETARIAN: That's an old Indian word meaning "I don't hunt so good." When the going gets tough, switch to power tools. |
|
|
|
|
08-03-2014, 11:36 AM
|
#4 |
|
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,149
|
Re: factory aluminum wheel
Those are the factory RPO PH7 Forged aluminum wheels.
They were also available in later years as an RPO N90, which was the same (appearance) wheel but changed to a cast wheel as a cost savings. They were available on 1/2 ton 2wd (5 hole 5" bolt circle) and 1/2 ton 4wd (6 hole bolt circle). K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
|
|
|
|
08-04-2014, 01:45 AM
|
#5 |
|
Registered User
Join Date: Jan 2012
Location: Oklahoma City, Oklahoma
Posts: 114
|
Re: factory aluminum wheel
Thank you very much fellas, now armed with information I'm off to try and find a set of nice forged ones and continue restoration.
__________________
Rally 'round the family....with a pocket full of shells. |
|
|
|
|
08-04-2014, 01:46 AM
|
#6 |
|
Registered User
Join Date: Jan 2012
Location: Oklahoma City, Oklahoma
Posts: 114
|
Re: factory aluminum wheel
One last thing, how do you tell if they are forged or cast?
__________________
Rally 'round the family....with a pocket full of shells. |
|
|
|
|
08-04-2014, 07:29 AM
|
#7 |
|
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,149
|
Re: factory aluminum wheel
By looking at the back side. Cast has real "fine" (ie, narrow) parting lines; forged has wider parting lines where the tooling comes together to form the wheel.
You probably won't be able to tell unless you have one of each laying side by side. K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
