AZ WTB. 71 BB Intake manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**yote1234** · 04-22-2014, 06:02 PM

looking for a intake manifold for my 1971 402 engine. prefer jan/feb 71 date code. i belive the #'s are 3955287. correct me if im wrong.
thx,dave

CST10 · 04-22-2014, 09:31 PM

I might have one. Let me look and I'll let ya know.

budnikguy · 04-22-2014, 09:34 PM

I have one, I will check the stamped code.

CST10 · 04-22-2014, 09:45 PM

My intake is #3866948. It's off a BB. Pm me if ya interested.

**yote1234** · 04-23-2014, 11:58 AM

Quote:

Originally Posted by budnikguy

I have one, I will check the stamped code.

please check and get back with me. thx

Quote:

Originally Posted by CST10

My intake is #3866948. It's off a BB. Pm me if ya interested.

after doing a search you might have a bb intake for a 66-67 chevelle?
but thx for reply.

budnikguy · 04-23-2014, 12:48 PM

Have what you need.

[URL=http://s163.photobucket.com/user/customcruiser/media/IMAG1105_zpsebxyeb9e.jpg.html]

[/URL

**yote1234** · 04-23-2014, 02:26 PM

is it 71? or 72? dave

budnikguy · 04-23-2014, 04:21 PM

Removed from a 71 GMC BB 402!

**yote1234** · 04-23-2014, 07:35 PM

Quote:

Originally Posted by budnikguy

Removed from a 71 GMC BB 402!

kool. can you find the date? thx,dave

budnikguy · 04-23-2014, 08:29 PM

How and where?

**lolife99** · 04-23-2014, 08:50 PM

http://www.drivinithome.com/engine-codes/

Chevrolet used both cast-iron and aluminum intake manifolds throughout the muscle car era, and the date codes are located in different places on each.
The code on cast-iron intakes is normally found on top of the intake near the casting number.
Aluminum intakes most always have the date code on the underside of the manifold, usually under the oil splash shield (if so equipped).
This will make the location of aluminum intake date codes impossible if installed on the engine, and even if not, the oil splash shield is in most cases riveted in place

budnikguy · 04-23-2014, 09:50 PM

Thanks for the info, I will remove the engine pull bracket and look...

kaphillips · 04-23-2014, 10:06 PM

Date is stamped by the coil mount holes under the brake booster line in format like A 15 1 would be January 15th of 71. Shouldnt have to remove the intake just look under the brake booster line.

Twisted78SS · 04-23-2014, 10:10 PM

I have one as well (pretty sure) will verify and reply tonight

Twisted78SS · 04-24-2014, 11:46 AM

Seems mine is still buried in the trailer from the latest swap meet, will look today.

**yote1234** · 04-24-2014, 12:50 PM

I FOUND ONE !!! can you belive i had a 71 402 burried in the back of a storage container foe over ??? 10 years and dug it out today. ####'s match and date works. and now i have a set of exhaust manifolds smog, for sale

thank you all for everything!!!!! dave

budnikguy · 04-24-2014, 01:19 PM

good deal...although the one I have is a Feb 71 date code like you wanted...lol

**yote1234** · 04-24-2014, 04:43 PM

Quote:

Originally Posted by budnikguy

good deal...although the one I have is a Feb 71 date code like you wanted...lol

correct me if im wrong? but is the c= march? dave

**yote1234** · 04-24-2014, 07:31 PM

pm sent

04-22-2014, 06:02 PM	#1
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,265	WTB. 71 BB Intake manifold looking for a intake manifold for my 1971 402 engine. prefer jan/feb 71 date code. i belive the #'s are 3955287. correct me if im wrong. thx,dave __________________ 1971 K5 CST Blazer 1972 short super c10 1965 Chevelle Malibu 283 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

04-22-2014, 09:31 PM	#2
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: WTB. 71 BB Intake manifold I might have one. Let me look and I'll let ya know. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

04-22-2014, 09:45 PM	#4
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: WTB. 71 BB Intake manifold My intake is #3866948. It's off a BB. Pm me if ya interested. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

04-23-2014, 12:48 PM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB. 71 BB Intake manifold Have what you need. [URL=http://s163.photobucket.com/user/customcruiser/media/IMAG1105_zpsebxyeb9e.jpg.html][/URL

04-23-2014, 02:26 PM	#7
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,265	Re: WTB. 71 BB Intake manifold is it 71? or 72? dave __________________ 1971 K5 CST Blazer 1972 short super c10 1965 Chevelle Malibu 283 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

04-22-2014, 09:34 PM	#3
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB. 71 BB Intake manifold I have one, I will check the stamped code.

04-23-2014, 04:21 PM	#8
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB. 71 BB Intake manifold Removed from a 71 GMC BB 402!

04-23-2014, 08:29 PM	#10
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB. 71 BB Intake manifold How and where?

04-23-2014, 08:50 PM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: WTB. 71 BB Intake manifold http://www.drivinithome.com/engine-codes/ Chevrolet used both cast-iron and aluminum intake manifolds throughout the muscle car era, and the date codes are located in different places on each. The code on cast-iron intakes is normally found on top of the intake near the casting number. Aluminum intakes most always have the date code on the underside of the manifold, usually under the oil splash shield (if so equipped). This will make the location of aluminum intake date codes impossible if installed on the engine, and even if not, the oil splash shield is in most cases riveted in place __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-23-2014, 09:50 PM	#12
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB. 71 BB Intake manifold Thanks for the info, I will remove the engine pull bracket and look...

04-23-2014, 10:06 PM	#13
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: WTB. 71 BB Intake manifold Date is stamped by the coil mount holes under the brake booster line in format like A 15 1 would be January 15th of 71. Shouldnt have to remove the intake just look under the brake booster line.

04-23-2014, 10:10 PM	#14
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: WTB. 71 BB Intake manifold I have one as well (pretty sure) will verify and reply tonight __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

04-24-2014, 11:46 AM	#15
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: WTB. 71 BB Intake manifold Seems mine is still buried in the trailer from the latest swap meet, will look today. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

04-24-2014, 12:50 PM	#16
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,265	Re: WTB. 71 BB Intake manifold I FOUND ONE !!! can you belive i had a 71 402 burried in the back of a storage container foe over ??? 10 years and dug it out today. ####'s match and date works. and now i have a set of exhaust manifolds smog, for sale thank you all for everything!!!!! dave __________________ 1971 K5 CST Blazer 1972 short super c10 1965 Chevelle Malibu 283 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

04-24-2014, 01:19 PM	#17
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB. 71 BB Intake manifold good deal...although the one I have is a Feb 71 date code like you wanted...lol



Register or Log In To remove these advertisements.

04-24-2014, 07:31 PM	#19
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,265	Re: WTB. 71 BB Intake manifold pm sent __________________ 1971 K5 CST Blazer 1972 short super c10 1965 Chevelle Malibu 283 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

Register or Log In To remove these advertisements.