GA Parting out 1971 gmc - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**heehawracing** · 12-30-2020, 08:42 AM

Quote:

Originally Posted by 69gmc292

Ill take the linkage. PM sent.

pm sent thanks ..my paypal is heehawracing@bellsouth.net

Larry S · 12-30-2020, 05:58 PM

Where are you located?
Seat
Outside non Ac heater box
Posted via Mobile Device

**heehawracing** · 12-30-2020, 10:34 PM

Quote:

Originally Posted by Larry S

Where are you located?
Seat
Outside non Ac heater box
Posted via Mobile Device

i should have one ill look im in senoia ga

Larry S · 12-30-2020, 10:36 PM

Quote:

Originally Posted by heehawracing

i should have one ill look im in senoia ga

Let me know. Im in Ga. Im close enough to pick up.
If you have them send me pics.
Thanks.
Posted via Mobile Device

**heehawracing** · 12-30-2020, 10:38 PM

Quote:

Originally Posted by Larry S

Let me know. Im in Ga. Im close enough to pick up.
If you have them send me pics.
Thanks.
Posted via Mobile Device

i have a few just need to take them off and see if they have rust on the metal around the heater motor

**sloGMC** · 12-31-2020, 03:16 PM

Is the CEC solenoid still floating around in the engine bay?

joe70 · 01-06-2021, 10:56 AM

Just wonder if you have the bed off,to send me some pics.I'am looking for a 2 piece clamshell carrier bearing and mounting plate.I have the chevy version with leaf springs.

bertvert72 · 01-09-2021, 08:57 PM

looking for a good gauge cluster. with all gauges not dummy lights

mikelcobb0@gmail.com · 01-26-2021, 01:45 PM

Bed still for sale? How long?

**heehawracing** · 01-26-2021, 01:46 PM

sold

**ndbacon** · 01-26-2021, 02:17 PM

Do you have any trim pieces left? Thanks.

**heehawracing** · 01-26-2021, 02:44 PM

Quote:

Originally Posted by ndbacon

Do you have any trim pieces left? Thanks.

yes

ddman6 · 02-01-2021, 07:59 AM

Can I get condition and prices on the following:
1. Underhood A/C Box (don't need the evap)
2. Underdash A/C/Heat Diverter
3. Underdash S-Duct plenum

Thanks
Dewayne

**heehawracing** · 02-01-2021, 08:47 AM

Quote:

Originally Posted by ddman6

Can I get condition and prices on the following:
1. Underhood A/C Box (don't need the evap)
2. Underdash A/C/Heat Diverter
3. Underdash S-Duct plenum

Thanks
Dewayne

all sold

joe70 · 03-15-2021, 02:13 PM

Just wonder if you have the bed off,to send me some pics of the drive shaft clam shell

**heehawracing** · 03-15-2021, 02:49 PM

Quote:

Originally Posted by joe70

Just wonder if you have the bed off,to send me some pics of the drive shaft clam shell

Pictures

randy7426 · 03-15-2021, 08:07 PM

Hey what kind of shape is the cab?

**heehawracing** · 03-15-2021, 08:10 PM

Quote:

Originally Posted by randy7426

Hey what kind of shape is the cab?

needs rockers and cab corners firewall look good

joe70 · 03-16-2021, 08:57 AM

I was looking for one from a chevy leaf spring rear end not swing arm,

thanks
joe

**heehawracing** · 03-16-2021, 09:15 AM

Quote:

Originally Posted by joe70

I was looking for one from a chevy leaf spring rear end not swing arm,

thanks
joe

there are several different ones do you have a picture of what you need im sure i have one

jacko241 · 03-16-2021, 10:25 AM

Is the grille still available? How much? Thanks.

joe70 · 03-16-2021, 10:56 AM

it is a 1970 chevy c10 with leaf springs Name: 12A93423-286D-4D4C-B44B-96B34F8C0A31.jpg
Views: 138
Size: 42.2 KB

joe70 · 03-16-2021, 11:02 AM

Or the HD clams type Name: CLAM SHELL BEARING SUPPORT 9.jpg
Views: 136
Size: 64.6 KB

Name: CLAM SHELL BEARING SUPPORT 7.jpg
Views: 130
Size: 95.4 KB

**dmjlambert** · 03-16-2021, 10:40 PM

Hi, was the dash cut for the aftermarket radio, and is the ashtray installed and slides OK? I am interested in center dash section with working ashtray.

**heehawracing** · 03-17-2021, 03:12 PM

Quote:

Originally Posted by dmjlambert

Hi, was the dash cut for the aftermarket radio, and is the ashtray installed and slides OK? I am interested in center dash section with working ashtray.

im going to sell the complete cab on this one

12-30-2020, 05:58 PM	#127
Larry S Registered User Join Date: Sep 2008 Location: Gainesville Ga Posts: 212	Re: Parting out 1971 gmc Where are you located? Seat Outside non Ac heater box Posted via Mobile Device

12-31-2020, 03:16 PM	#131
sloGMC Active Member Join Date: Jun 2018 Location: Central Coast, CA Posts: 116	Re: Parting out 1971 gmc Is the CEC solenoid still floating around in the engine bay? __________________ 1971 Pontiac Firebird 1971 GMC C2500

01-06-2021, 10:56 AM	#132
joe70 Registered User Join Date: May 2001 Location: saint peters,mo,usa Posts: 42	Re: Parting out 1971 gmc Just wonder if you have the bed off,to send me some pics.I'am looking for a 2 piece clamshell carrier bearing and mounting plate.I have the chevy version with leaf springs.

01-09-2021, 08:57 PM	#133
bertvert72 Registered User Join Date: Dec 2009 Location: Dickson,Tn Posts: 218	Re: Parting out 1971 gmc looking for a good gauge cluster. with all gauges not dummy lights __________________ Bret Here's a link to my build http://67-72chevytrucks.com/vboard/s...d.php?t=577889

01-26-2021, 01:45 PM	#134
mikelcobb0@gmail.com Registered User Join Date: Aug 2019 Location: Cameron wi Posts: 55	Re: Parting out 1971 gmc Bed still for sale? How long?

01-26-2021, 01:46 PM	#135
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: Parting out 1971 gmc sold

01-26-2021, 02:17 PM	#136
ndbacon Junior Member Join Date: Jan 2019 Location: Fargo, ND Posts: 38	Re: Parting out 1971 gmc Do you have any trim pieces left? Thanks.

02-01-2021, 07:59 AM	#138
ddman6 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 57	Re: Parting out 1971 gmc Can I get condition and prices on the following: 1. Underhood A/C Box (don't need the evap) 2. Underdash A/C/Heat Diverter 3. Underdash S-Duct plenum Thanks Dewayne

03-15-2021, 02:13 PM	#140
joe70 Registered User Join Date: May 2001 Location: saint peters,mo,usa Posts: 42	Re: Parting out 1971 gmc Just wonder if you have the bed off,to send me some pics of the drive shaft clam shell

03-15-2021, 08:07 PM	#142
randy7426 Registered User Join Date: Sep 2013 Location: Signal Mtn. Tn. 37377 Posts: 58	Re: Parting out 1971 gmc Hey what kind of shape is the cab?

03-16-2021, 08:57 AM	#144
joe70 Registered User Join Date: May 2001 Location: saint peters,mo,usa Posts: 42	Re: Parting out 1971 gmc I was looking for one from a chevy leaf spring rear end not swing arm, thanks joe

03-16-2021, 10:25 AM	#146
jacko241 Registered User Join Date: Apr 2020 Location: Saint Augustine Posts: 24	Re: Parting out 1971 gmc Is the grille still available? How much? Thanks.

03-16-2021, 10:56 AM	#147
joe70 Registered User Join Date: May 2001 Location: saint peters,mo,usa Posts: 42	Re: Parting out 1971 gmc it is a 1970 chevy c10 with leaf springs

03-16-2021, 11:02 AM	#148
joe70 Registered User Join Date: May 2001 Location: saint peters,mo,usa Posts: 42	Re: Parting out 1971 gmc Or the HD clams type

03-16-2021, 10:40 PM	#149
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,563	Re: Parting out 1971 gmc Hi, was the dash cut for the aftermarket radio, and is the ashtray installed and slides OK? I am interested in center dash section with working ashtray.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.