My new project 86 Silverado - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

naphtali5725 · 03-07-2015, 03:19 PM

got the proper oil galley plug with the .040 distributor oiling hole from rocketracing installed...
replaced the 29/32" freeze plug...

got the motor mounts assembled and on the engine - new grade 8 hardware...
put the torque converter in the tranny...
mated the engine/tranny - new grade 8 hardware...

will install in the truck tomorrow...

updates soon...

Hankster · 03-08-2015, 12:03 PM

Looks good! Can't wait to see it in!

naphtali5725 · 03-08-2015, 04:30 PM

got the new energy suspension mount installed on the tranny...

the strap that holds my hoist wasn't looking so good... so i am going tomorrow to get a new strap, i'll drop the motor in tomorrow... delays...

Hankster · 03-08-2015, 06:04 PM

I got an energy suspension mount under my turbo 400!

naphtali5725 · 03-09-2015, 10:11 PM

got new strap for my hoist, so if tomorrow no rain, motor will go in...
here's hoping for a dry day!

Hankster · 03-10-2015, 02:28 PM

Its not raining here, so Hopefully its not there?

naphtali5725 · 03-10-2015, 03:14 PM

it's in the hole... finally (<-- what she said)

NONHOG · 03-10-2015, 03:37 PM

Good to see! Can't recall? Already have headers?

naphtali5725 · 03-10-2015, 03:39 PM

Quote:

Originally Posted by NONHOG

Good to see! Can't recall? Already have headers?

no headers yet, but i know of my options... A or G body should fit, but it looks as if Hedman shorties should work too, will decide when it's time to fire it up...

naphtali5725 · 03-12-2015, 03:07 PM

got to lay a coat of paint on the rad core support, have all the new bushings ready to go...

digging out all the clips and bolts etc. to start hanging the front clip...

there's a car wash down the road with those high pressure wands.. i'm going to take all my engine accessory brackets, etc. down there and wash them, that should degrease and clean them all, so i can paint them and start assembling the engine... updates as they come over the next few days/weeks...

hope everyone is well and getting ready for spring

NewType72 · 03-12-2015, 03:16 PM

Man that blue really pops in the engine bay. Looking great!

naphtali5725 · 03-12-2015, 03:18 PM

Quote:

Originally Posted by NewType72

Man that blue really pops in the engine bay. Looking great!

thanks man, i wish the paint job on the engine was a little better... looks as if a little brown i showing through it... I may touch it up, may not... it's a street machine, so it's really no big deal

naphtali5725 · 03-12-2015, 03:20 PM

i noticed something else, when i put the engine/tranny(bout 800 pounds) in, the front end didn't go down very much... it looks like it's higher than the back...
i'm hoping all the fenders, hood, radiator, all the other crap under the hood etc. etc. will make it go down some more LOL

greg64 · 03-15-2015, 06:58 PM

Just finished reading your whole thread. Great looking project. It's the Olds power that initially caught my attention, I like unusual combos.

One thing I noticed... On the ball joints on the upper control arms, the bolts are in backwards. The nuts are supposed to be on the top side. This is so that there is more clearance around the boot on the bottom side.

Good luck with your project!

Oh, and I think you're right that the additional front end weight will bring the nose down.

naphtali5725 · 03-15-2015, 07:00 PM

Quote:

Originally Posted by greg64

Just finished reading your whole thread. Great looking project. It's the Olds power that initially caught my attention, I like unusual combos.

One thing I noticed... On the ball joints on the upper control arms, the bolts are in backwards. The nuts are supposed to be on the top side. This is so that there is more clearance around the boot on the bottom side.

Good luck with your project!

Oh, and I think you're right that the additional front end weight will bring the nose down.

thanks for taking the time to look man, thanks for the info...

anyone second this about the bolts?

Hankster · 03-15-2015, 08:43 PM

Quote:

Originally Posted by naphtali5725

it's in the hole... finally (<-- what she said)

Sweet! It's in!

NewType72 · 03-15-2015, 10:05 PM

Quote:

Originally Posted by naphtali5725

thanks for taking the time to look man, thanks for the info...

anyone second this about the bolts?

I'll second that. Makes logical sense anyway

68Timber · 03-15-2015, 10:15 PM

Congrats man, looking good.

naphtali5725 · 03-15-2015, 10:45 PM

Quote:

Originally Posted by BRUISER

Congrats man, looking good.

thanks!

naphtali5725 · 03-15-2015, 10:46 PM

Quote:

Originally Posted by NewType72

I'll second that. Makes logical sense anyway

i'll check them out...

Sodell · 03-15-2015, 11:22 PM

Got it in! Awesome!

naphtali5725 · 03-15-2015, 11:23 PM

Quote:

Originally Posted by Sodell

Got it in! Awesome!

yeah man, bout time

naphtali5725 · 03-17-2015, 06:53 AM

waiting on some bolts/innner fender clips from classic parts, and i'll put the inner/outer fenders together and hang them... hopefully this week...

otherwise, busy washing and painting engine accessories etc.
pics soon...

naphtali5725 · 03-19-2015, 07:01 AM

got my bolts and clips for the inner/outer fenders...

wonderful... 90% rain today dammit

naphtali5725 · 03-22-2015, 03:38 PM

update: washed all the parts at the carwash

painted the front of the radiator core support with rattle rustoleum semi-gloss black(1 can), the inner fenders were painted on top with the same(one can per), and underneath with rustoleum black hammer paint(one can per)...
need to buy more paint to do the other side of the rad supp...

pics when my wife gets back with the camera LOL...

will try and bolt up the core supp, and the inner wells, to the fenders tomorrow if it's not raining

03-07-2015, 03:19 PM	#576
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado got the proper oil galley plug with the .040 distributor oiling hole from rocketracing installed... replaced the 29/32" freeze plug... got the motor mounts assembled and on the engine - new grade 8 hardware... put the torque converter in the tranny... mated the engine/tranny - new grade 8 hardware... will install in the truck tomorrow... updates soon... Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy Last edited by naphtali5725; 03-07-2015 at 04:14 PM.

03-08-2015, 12:03 PM	#577
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: My new project 86 Silverado Looks good! Can't wait to see it in! __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

03-08-2015, 04:30 PM	#578
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado got the new energy suspension mount installed on the tranny... the strap that holds my hoist wasn't looking so good... so i am going tomorrow to get a new strap, i'll drop the motor in tomorrow... delays... __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

03-08-2015, 06:04 PM	#579
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: My new project 86 Silverado I got an energy suspension mount under my turbo 400! __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

03-09-2015, 10:11 PM	#580
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado got new strap for my hoist, so if tomorrow no rain, motor will go in... here's hoping for a dry day! __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

03-10-2015, 02:28 PM	#581
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: My new project 86 Silverado Its not raining here, so Hopefully its not there? __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

03-10-2015, 03:14 PM	#582
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado it's in the hole... finally (<-- what she said) Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy Last edited by naphtali5725; 03-10-2015 at 03:27 PM.

03-10-2015, 03:37 PM	#583
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: My new project 86 Silverado Good to see! Can't recall? Already have headers? __________________ "I feel the need for speed!"... as soon as I am done with my nap.

03-12-2015, 03:07 PM	#585
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado got to lay a coat of paint on the rad core support, have all the new bushings ready to go... digging out all the clips and bolts etc. to start hanging the front clip... there's a car wash down the road with those high pressure wands.. i'm going to take all my engine accessory brackets, etc. down there and wash them, that should degrease and clean them all, so i can paint them and start assembling the engine... updates as they come over the next few days/weeks... hope everyone is well and getting ready for spring __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

03-12-2015, 03:16 PM	#586
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: My new project 86 Silverado Man that blue really pops in the engine bay. Looking great! __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

03-12-2015, 03:20 PM	#588
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado i noticed something else, when i put the engine/tranny(bout 800 pounds) in, the front end didn't go down very much... it looks like it's higher than the back... i'm hoping all the fenders, hood, radiator, all the other crap under the hood etc. etc. will make it go down some more LOL __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

03-15-2015, 06:58 PM	#589
greg64 Registered User Join Date: Dec 2007 Location: Kimberley, BC, Canada Posts: 799	Re: My new project 86 Silverado Just finished reading your whole thread. Great looking project. It's the Olds power that initially caught my attention, I like unusual combos. One thing I noticed... On the ball joints on the upper control arms, the bolts are in backwards. The nuts are supposed to be on the top side. This is so that there is more clearance around the boot on the bottom side. Good luck with your project! Oh, and I think you're right that the additional front end weight will bring the nose down. __________________ Greg 64 GMC Suburban - 283, NV3500, 14 bolt 77 C10 swb - 292, SM465, 12 bolt

03-15-2015, 10:15 PM	#593
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: My new project 86 Silverado Congrats man, looking good. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

03-15-2015, 11:22 PM	#596
Sodell Registered User Join Date: Mar 2013 Location: Fayetteville Arkansas Posts: 830	Re: My new project 86 Silverado Got it in! Awesome! __________________ Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652

03-17-2015, 06:53 AM	#598
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado waiting on some bolts/innner fender clips from classic parts, and i'll put the inner/outer fenders together and hang them... hopefully this week... otherwise, busy washing and painting engine accessories etc. pics soon... __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy



Register or Log In To remove these advertisements.

03-19-2015, 07:01 AM	#599
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado got my bolts and clips for the inner/outer fenders... wonderful... 90% rain today dammit __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

03-22-2015, 03:38 PM	#600
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado update: washed all the parts at the carwash painted the front of the radiator core support with rattle rustoleum semi-gloss black(1 can), the inner fenders were painted on top with the same(one can per), and underneath with rustoleum black hammer paint(one can per)... need to buy more paint to do the other side of the rad supp... pics when my wife gets back with the camera LOL... will try and bolt up the core supp, and the inner wells, to the fenders tomorrow if it's not raining __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy Last edited by naphtali5725; 03-23-2015 at 08:46 AM.

Register or Log In To remove these advertisements.