For The best wheel Prices you Must Check TNT-MotorSports.

[ksbrktracer]

We are a Direct Dealer for most major lines of wheels with a few others thrown in for good measure (About 75 Brands and Counting ) ...... Before you buy Wheels from anyone you must check out our prices.

We have dealt with lowered Chevy trucks for over 30 years and we KNOW what fits.

We have been a forum member since 2008 ... So you Do know who you are dealing with.

Phone Calls will get the quickest response as we are swamped in the shop with customer projects as well and it is tough to get on here all the time.

Ask any of our customers about us ..... WE stand back of what we sell as well.

[ksbrktracer]

We SHIP Nationwide and will do special orders as well as custom built. Check us out .......!

[C10_ustacould]

I'm going to have to agree with the title of this post. Tommy goes above and beyond to find the wheel you are looking for, with the right fitment, and the right price. Give him a call, you won't be disappointed!

[ksbrktracer]

Alright Buck where do I send the $5 bucks too ...... !!! Thank You .. I appreciate it.

[C10_ustacould]

Originally Posted by ksbrktracer

Alright Buck where do I send the $5 bucks too ...... !!! Thank You .. I appreciate it.

This public service announcement is pro-bono, I'm sure you'll be there for me when I start ordering parts for the next project.

[mx289]

Originally Posted by Bucks68

I'm going to have to agree with the title of this post. Tommy goes above and beyond to find the wheel you are looking for, with the right fitment, and the right price. Give him a call, you won't be disappointed!

X2 !
Top notch customer service.

[ksbrktracer]

Guys I appreciate it ...... Thank You.

[ob1monkey]

I could use a quote for a set of wheel vintiques series 12 16x7 6x 5.5 lug shipped to 32771. thanks Ben

[ksbrktracer]

Originally Posted by ob1monkey

I could use a quote for a set of wheel vintiques series 12 16x7 6x 5.5 lug shipped to 32771. thanks Ben

PM Sent

[ecgate]

Im looking for a set of torq thrust style 18" wheels. I have a 1967 c10 with a 5 bolt conversion and it has a 4.5/7 drop. Can you send me a quote for the cheapest route that you guys offer. Im not looking for a specific brand but more specific for the 5 spoke style. Can you inform me of what my backspacing should be. I was told it should be 4.5 in the rear and 5.5 in the front. Is there any play room with the backspacing?

[ksbrktracer]

I would need a little more info to get good answers on backspacing. If you want to give me a call we can talk about available options or pm me your # and I will call you.

[ecgate]

Originally Posted by ksbrktracer

I would need a little more info to get good answers on backspacing. If you want to give me a call we can talk about available options or pm me your # and I will call you.

Sorry I haven't called you yet Ive haven't had a chance to. But any way I have a 1967 c10 fleetside with 5 lug 5x5 bolt pattern. Disc brakes in the front and in the rear. The rear end is out of a 70-72 that is wider than the earlier rear ends. Let me know what you can do for me. Thanks.

[Blue97]

Originally Posted by mx289

X2 !
Top notch customer service.

X3!

Tommy can you get the iroc replicas for the 88-98 c1500

Looking at the 20x9" wheels in chrome.

Thanks

[ksbrktracer]

Originally Posted by Blue97

X3!

Tommy can you get the iroc replicas for the 88-98 c1500

Looking at the 20x9" wheels in chrome.

Thanks

The Irocs will be 20X8.5 , but they are on backorder till the end of the year (Only 2 fronts in stock ) . They have 2 20X8.5's in stock and I could get 22X9.5 for the rear ???

20X8.5's run $190.00 each
22X9.5's run $220.00 each

[ksbrktracer]

Originally Posted by ecgate

Sorry I haven't called you yet Ive haven't had a chance to. But any way I have a 1967 c10 fleetside with 5 lug 5x5 bolt pattern. Disc brakes in the front and in the rear. The rear end is out of a 70-72 that is wider than the earlier rear ends. Let me know what you can do for me. Thanks.

We could do 18X8's 4.5" bs on the front and 18X9.5 5.0" bs on the rear. Ridler 645's or 695's would be the most reasonable. I can also do those in Boss 338's. If you wanted a different backspace we would run into a custom built wheel which would change the price drastically . I just did that combination on a 1971 and it looks super.

[Blue97]

Originally Posted by ksbrktracer

The Irocs will be 20X8.5 , but they are on backorder till the end of the year (Only 2 fronts in stock ) . They have 2 20X8.5's in stock and I could get 22X9.5 for the rear ???

20X9.5's run $190.00 each
22X9.5's run $220.00 each

I think I will wait for the 20's I'm not sure about running 22's

Will these have the backspace to do a 2/4 drop with.

[ksbrktracer]

Originally Posted by Blue97

I think I will wait for the 20's I'm not sure about running 22's

Will these have the backspace to do a 2/4 drop with.

To be correct they are only 20X8.5's. They have a +10mm offset which equals 5.25" bs. So yes they will fit all the way around.

[Blue97]

Originally Posted by ksbrktracer

To be correct they are only 20X8.5's. They have a +10mm offset which equals 5.25" bs. So yes they will fit all the way around.

OK, and thank you I'm glad to hear that

[ecgate]

Originally Posted by ksbrktracer

We could do 18X8's 4.5" bs on the front and 18X9.5 5.0" bs on the rear. Ridler 645's or 695's would be the most reasonable. I can also do those in Boss 338's. If you wanted a different backspace we would run into a custom built wheel which would change the price drastically . I just did that combination on a 1971 and it looks super.

Can you get me a quote for the Ridler 695's? And what tire size do you recommend? I was actually thinking about running 255/55/18 on the front and rear. I figured that way I could rotate my tires but I am all ears for suggestions. Thanks

[ksbrktracer]

Originally Posted by ecgate

Can you get me a quote for the Ridler 695's? And what tire size do you recommend? I was actually thinking about running 255/55/18 on the front and rear. I figured that way I could rotate my tires but I am all ears for suggestions. Thanks

I am a person that likes the staggered look with as much tire as possible ...... So that always drives my suggestions. The 255/55/18 is 29" tall ..... So it would definitely work and I understand wanting to rotate them.

The pictures I am posting is a customers truck with 18x8 and18x9.5's with 255/45/18's (27.0" tall) and 295/45/18's (28.5" tall) for reference. I am not sure of the exact drop as I didn't do it. My opinion only ..... I think the truck in the pictures could use some more tire or come down some more.

[ksbrktracer]

Originally Posted by ecgate

Can you get me a quote for the Ridler 695's? And what tire size do you recommend? I was actually thinking about running 255/55/18 on the front and rear. I figured that way I could rotate my tires but I am all ears for suggestions. Thanks

PM sent with pricing

[ironfish96]

Could I get a price for Gray Daytona
20x8.5 5.25 BS
20x10 5.5 BS
for 1972 C10. Thanks

[ksbrktracer]

Originally Posted by ironfish96

Could I get a price for Gray Daytona
20x8.5 5.25 BS
20x10 5.5 BS
for 1972 C10. Thanks

Unfortunately they have discontinued that wheel. I believe member Bucks68 has a set of 20x8.5 and 22x9.5 in black finish for sale in the parts forum

[ksbrktracer]

.


To the top ...... !


.

[C10agent]

Originally Posted by ksbrktracer

Unfortunately they have discontinued that wheel. I believe member Bucks68 has a set of 20x8.5 and 22x9.5 in black finish for sale in the parts forum

Can you get the gray daytonas 22x11 with a good bs anymore? I was looking to get a pair for the rear.