My 93 CCSSB - Page 30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dub_X · 01-12-2011, 03:56 PM

Lucky for us, when my dad was running a big ass liquid oxygen bottle for his torch, when he needed to unload it, we had a backhoe in handy to do it the redneck way. Wrap a chain around the top of the bottle, then hook the chain to the bucket of the backhoe, and try to crank 'er up without hitting the side of the bed. Lmao. It's easier to move when the truck's a flatbed.

scotts62 · 01-12-2011, 04:25 PM

we tried to get the guy on the fork lift that loaded it to bring it out and help but it was a no go..

Dub_X · 01-12-2011, 11:05 PM

He wouldn't do it? Pansy, I say.

scotts62 · 01-31-2011, 12:10 AM

Going to try and give this thing some love during the next few weeks im off

JohnC · 01-31-2011, 10:08 AM

Sweet!

motornut · 03-30-2011, 07:57 AM

i'm lovin the crew cab ideas
those bike tanks are way cool
excuse me while i wipe off the drool after seeing that compressor it's huge

JohnC · 03-30-2011, 10:14 AM

Man I thought you had taken a break from the honey do's and had an update for us

Posted via Mobile Device

scotts62 · 03-30-2011, 07:01 PM

Quote:

Originally Posted by motornut

i'm lovin the crew cab ideas
those bike tanks are way cool
excuse me while i wipe off the drool after seeing that compressor it's huge

thanks!

Quote:

Originally Posted by JohnC

Man I thought you had taken a break from the honey do's and had an update for us

Posted via Mobile Device

My too John mee tooooo

Adding 540sfqt to the house.. no time for toys at the moment, dangit

mcbassin · 03-30-2011, 07:32 PM

Oops....I thought the same thing for a minute. no update, dang it. BTW, good luck with that add on. I just love construction.

scotts62 · 03-30-2011, 09:25 PM

I just dug a trench 2ft wide, 3ft ish deep and 15ft long.. no Mike construction sucks

scotts62 · 05-17-2011, 10:17 PM

Well i got the interior pretty much gutted tonight and cleaned up all the mud and junk that was under the old nasty rubber floor. Found that the heater core had been leaking for a long time and rusted a hole in the passenger floor panel

Also put some 2" shackles on it trying to level it out a bit but its going to need about 2" more so i guess ill need to find some hangers.

mcbassin · 05-18-2011, 08:48 AM

Come on Scotty we need some pictures.

the_duke · 05-20-2011, 01:53 PM

Quote:

Originally Posted by scotts62

Well i got the interior pretty much gutted tonight and cleaned up all the mud and junk that was under the old nasty rubber floor. Found that the heater core had been leaking for a long time and rusted a hole in the passenger floor panel

Also put some 2" shackles on it trying to level it out a bit but its going to need about 2" more so i guess ill need to find some hangers.

Do you have the headliner out?

scotts62 · 05-20-2011, 05:22 PM

Ya i need to get pics up real quick..

Not yet its very close but i didnt want it to be in the way as i paint this weekend.

JohnC · 05-21-2011, 10:38 AM

Progress is progress! Congrats man!

the_duke · 05-21-2011, 01:02 PM

Quote:

Originally Posted by scotts62

Ya i need to get pics up real quick..

Not yet its very close but i didnt want it to be in the way as i paint this weekend.

Call/Text me when you get it completely out. I wanna look at the inside skin please!

scotts62 · 05-21-2011, 10:56 PM

Will do. I got some por15 to put on the surface rusty floor. once it get this paint job i have in there now done i can get it back in there and start working on it more. I just need a good weekend to get that bad boy together and running

chris@bigjranch.com · 07-17-2011, 04:38 PM

Sweet build thread man!
Posted via Mobile Device

scotts62 · 07-18-2011, 12:04 AM

Thanks! Been a while since i have touched it but it will get there.

scotts62 · 09-24-2011, 12:34 AM

Im getting the itch to get it going!!! But will i?

89chevsj · 09-25-2011, 01:06 AM

get it goin... i DARE ya. haha how the truck lookin these days?

scotts62 · 09-25-2011, 01:39 PM

Pushed it outside to get some customer stuff done. Just have to put the trans wiring in and some other little things and it will run. But other than that its the same..

Oh i did score some seats from a buddy but i havent mounted them yet.

JohnC · 09-28-2011, 09:48 AM

Quote:

Originally Posted by scotts62

Pushed it outside to get some customer stuff done. Just have to put the trans wiring in and some other little things and it will run. But other than that its the same..

Oh i did score some seats from a buddy but i havent mounted them yet.

Pics or it didn't happen

scotts62 · 11-07-2011, 01:56 AM

UPDATE!!! I pulled it into the shop today..

**Palf70Step** · 11-07-2011, 06:20 AM

What? No pictures?

01-12-2011, 03:56 PM	#726
Dub_X Professional Crow Bar Tosser Join Date: Dec 2010 Location: Fairview, Missouri [Joplin Area] Posts: 872	Re: My 93 Crewcab Build Lucky for us, when my dad was running a big ass liquid oxygen bottle for his torch, when he needed to unload it, we had a backhoe in handy to do it the redneck way. Wrap a chain around the top of the bottle, then hook the chain to the bucket of the backhoe, and try to crank 'er up without hitting the side of the bed. Lmao. It's easier to move when the truck's a flatbed. __________________ Will My Beast "Big Nasty": '92 GMC Sierra K1500 Ext. Cab L31 Swap 4x4 Conversion: 2" Body Lift, 3" Skyjacker Suspension Lift, 9.5" 14-Bolt G80 Rear, 3:73 Gears, 350cid L31 Vortec 5700, 4L60-E Overdrive Automatic My Dad's Beast: CUSTOM '97 Chevrolet Silverado K3500 4-Door Mega Cab Project: 10.5" 14-Bolt G80 Rear, 4:10 Gears, 5.7L 350cid SBC Vortec, 4L80-E Overdrive Automatic "I'd rather PUSH my Chevy than DRIVE your Ford!"

01-12-2011, 04:25 PM	#727
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build we tried to get the guy on the fork lift that loaded it to bring it out and help but it was a no go.. __________________ Scott 93 crew cab build Project 62

01-12-2011, 11:05 PM	#728
Dub_X Professional Crow Bar Tosser Join Date: Dec 2010 Location: Fairview, Missouri [Joplin Area] Posts: 872	Re: My 93 Crewcab Build He wouldn't do it? Pansy, I say. __________________ Will My Beast "Big Nasty": '92 GMC Sierra K1500 Ext. Cab L31 Swap 4x4 Conversion: 2" Body Lift, 3" Skyjacker Suspension Lift, 9.5" 14-Bolt G80 Rear, 3:73 Gears, 350cid L31 Vortec 5700, 4L60-E Overdrive Automatic My Dad's Beast: CUSTOM '97 Chevrolet Silverado K3500 4-Door Mega Cab Project: 10.5" 14-Bolt G80 Rear, 4:10 Gears, 5.7L 350cid SBC Vortec, 4L80-E Overdrive Automatic "I'd rather PUSH my Chevy than DRIVE your Ford!"

01-31-2011, 12:10 AM	#729
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Going to try and give this thing some love during the next few weeks im off __________________ Scott 93 crew cab build Project 62

01-31-2011, 10:08 AM	#730
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build Sweet!

03-30-2011, 07:57 AM	#731
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: My 93 Crewcab Build i'm lovin the crew cab ideas those bike tanks are way cool excuse me while i wipe off the drool after seeing that compressor it's huge __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

03-30-2011, 10:14 AM	#732
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build Man I thought you had taken a break from the honey do's and had an update for us Posted via Mobile Device

03-30-2011, 07:32 PM	#734
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My 93 Crewcab Build Oops....I thought the same thing for a minute. no update, dang it. BTW, good luck with that add on. I just love construction. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-30-2011, 09:25 PM	#735
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build I just dug a trench 2ft wide, 3ft ish deep and 15ft long.. no Mike construction sucks __________________ Scott 93 crew cab build Project 62

05-17-2011, 10:17 PM	#736
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Well i got the interior pretty much gutted tonight and cleaned up all the mud and junk that was under the old nasty rubber floor. Found that the heater core had been leaking for a long time and rusted a hole in the passenger floor panel Also put some 2" shackles on it trying to level it out a bit but its going to need about 2" more so i guess ill need to find some hangers. __________________ Scott 93 crew cab build Project 62

05-18-2011, 08:48 AM	#737
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My 93 Crewcab Build Come on Scotty we need some pictures. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-20-2011, 05:22 PM	#739
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Ya i need to get pics up real quick.. Not yet its very close but i didnt want it to be in the way as i paint this weekend. __________________ Scott 93 crew cab build Project 62

05-21-2011, 10:38 AM	#740
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build Progress is progress! Congrats man!

05-21-2011, 10:56 PM	#742
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Will do. I got some por15 to put on the surface rusty floor. once it get this paint job i have in there now done i can get it back in there and start working on it more. I just need a good weekend to get that bad boy together and running __________________ Scott 93 crew cab build Project 62

07-17-2011, 04:38 PM	#743
chris@bigjranch.com KIDHLR Join Date: Aug 2006 Location: Joplin MO Posts: 217	Re: My 93 Crewcab Build Sweet build thread man! Posted via Mobile Device __________________ Christopher Johnson Project - Grafted In AKA the "KIDHLR" Conversion - KIDHLR Meets LPG KIDHLR 2.0 Rise of the diesel(a 6.5 powered 6 Door pickup) Romans 11:17-22 "Branches were broken off so that I could be grafted in"



Register or Log In To remove these advertisements.

07-18-2011, 12:04 AM	#744
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Thanks! Been a while since i have touched it but it will get there. __________________ Scott 93 crew cab build Project 62

09-24-2011, 12:34 AM	#745
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Im getting the itch to get it going!!! But will i? __________________ Scott 93 crew cab build Project 62

09-25-2011, 01:06 AM	#746
89chevsj error 404 Join Date: Oct 2010 Location: soldotna alaska Posts: 1,252	Re: My 93 Crewcab Build get it goin... i DARE ya. haha how the truck lookin these days? __________________ 89 Chevy swb 350 "SJ" DD turned parts truck. SOLD 90 Chevy ext cab loooongbed. "storm trooper" Rust In Peace. 06 Kia sorento wife's car 06 charger srt8 "lucifer" my toy '12 Kia optima

09-25-2011, 01:39 PM	#747
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Pushed it outside to get some customer stuff done. Just have to put the trans wiring in and some other little things and it will run. But other than that its the same.. Oh i did score some seats from a buddy but i havent mounted them yet. __________________ Scott 93 crew cab build Project 62

11-07-2011, 01:56 AM	#749
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build UPDATE!!! I pulled it into the shop today.. __________________ Scott 93 crew cab build Project 62

11-07-2011, 06:20 AM	#750
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,672	Re: My 93 Crewcab Build What? No pictures? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Register or Log In To remove these advertisements.