The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > S10 S15 Luv Blazer

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-06-2011, 11:50 AM   #1
vikasintl
Registered User
 
Join Date: Aug 2011
Location: Lakewood WA
Posts: 30
Question timing light does not shoot at steady 8

we have 1989 Gmc s15 truck 112k miles

when I check timing instead showing at 8 degree
it flickers between 6 to 10..sometimes 6 sometimes 8 or 10 etc.

same thing with vacuum ..flickers between 14 to 17 etc.

also when we start the truck it vibrates heavily and when stomp on gas pedal vibration stops...when we drive it does not vibrates..so am not sure...if this is due to engine mounts. I also think when engine is warm it does nor vibrates...


changed spark plugs, checked wires for resistance, cleaned cap and rotor...


what should be reason? and what's solution?
vikasintl is offline   Reply With Quote
Old 09-06-2011, 10:30 PM   #2
68C15
blood type; Retumbo
 
68C15's Avatar
 
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
Re: timing light does not shoot at steady 8

check for vacuum leak. IAC is attempting to bring things back to normal as well as ECM changing timing which accounts for fluctuating timing.
__________________
Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card
68C15 is offline   Reply With Quote
Old 09-06-2011, 10:37 PM   #3
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,935
Re: timing light does not shoot at steady 8

I would agree with 68C15, if it fluctuates its internal like a miss. Remember, there is such thing as a lean miss which would be where he is pointing you. Simply enough, it is an internal problem and not a problem with mounts or something similar.
__________________
Nick Carter
1967 C10 Short bed Fleetside
Project Cheap Thrills!
2WD C10 Modern/Performance Alignments
Easiest Alignment Ever!
BMERDOC is offline   Reply With Quote
Old 09-06-2011, 11:42 PM   #4
vikasintl
Registered User
 
Join Date: Aug 2011
Location: Lakewood WA
Posts: 30
Question Re: timing light does not shoot at steady 8

Quote:
Originally Posted by 68C15 View Post
check for vacuum leak. IAC is attempting to bring things back to normal as well as ECM changing timing which accounts for fluctuating timing.
Someone suggested to check for pressure regulator spring and its not broken...how do I check for vacuum leak?

also how do I check for IAC? if its working properly or something wrong there?
vikasintl is offline   Reply With Quote
Old 09-07-2011, 06:35 AM   #5
68C15
blood type; Retumbo
 
68C15's Avatar
 
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
Re: timing light does not shoot at steady 8

Quote:
Originally Posted by vikasintl View Post
how do I check for vacuum leak?

also how do I check for IAC? if its working properly or something wrong there?
spray carb clean, just a shot here and there. when the idle changes you have found it. you can also use a mechanic's stethoscope with just the hose to focus your hearing while you listen for a hiss.

the IAC is like the sheriff in town. if he is arresting a bunch of drunk drivers he is not the problem, he's just doing his job.
__________________
Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card
68C15 is offline   Reply With Quote
Old 09-07-2011, 04:58 PM   #6
vikasintl
Registered User
 
Join Date: Aug 2011
Location: Lakewood WA
Posts: 30
Question Re: timing light does not shoot at steady 8

Quote:
Originally Posted by 68C15 View Post
spray carb clean, just a shot here and there. when the idle changes you have found it. you can also use a mechanic's stethoscope with just the hose to focus your hearing while you listen for a hiss.

the IAC is like the sheriff in town. if he is arresting a bunch of drunk drivers he is not the problem, he's just doing his job.

Thanks I found a vacuum leak and fixed the hose and it runs smooth now..truck or engine is not shacking any more...thanks for advice..

I did not understand what you meant for IAC though...
vikasintl is offline   Reply With Quote
Old 09-07-2011, 07:27 PM   #7
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,935
Re: timing light does not shoot at steady 8

IAC= Idle Air Control
__________________
Nick Carter
1967 C10 Short bed Fleetside
Project Cheap Thrills!
2WD C10 Modern/Performance Alignments
Easiest Alignment Ever!
BMERDOC is offline   Reply With Quote
Old 09-07-2011, 07:45 PM   #8
95 S_Trucker
Registered User
 
95 S_Trucker's Avatar
 
Join Date: Oct 2009
Location: .
Posts: 2,178
Re: timing light does not shoot at steady 8

when you check timing, are you unplugging the timing connector under the pass. side carpet?
95 S_Trucker is offline   Reply With Quote
Old 09-14-2011, 03:45 PM   #9
vikasintl
Registered User
 
Join Date: Aug 2011
Location: Lakewood WA
Posts: 30
Question Re: timing light does not shoot at steady 8

Quote:
Originally Posted by 95 S_Trucker View Post
when you check timing, are you unplugging the timing connector under the pass. side carpet?
We have 89 gmc s15 2.5 Liter ..does it have timing connector?
vikasintl is offline   Reply With Quote
Old 09-15-2011, 08:13 AM   #10
Tink
Registered User
 
Tink's Avatar
 
Join Date: May 2002
Location: VA
Posts: 1,337
Re: timing light does not shoot at steady 8

Yup, all computer controlled vehicles do.
__________________
69 Chevy C10

88 Sierra

02 2500 Suburban
And too many S10s to list!
Tink is offline   Reply With Quote
Old 09-15-2011, 11:32 AM   #11
vikasintl
Registered User
 
Join Date: Aug 2011
Location: Lakewood WA
Posts: 30
Question Re: timing light does not shoot at steady 8

Quote:
Originally Posted by Tink View Post
Yup, all computer controlled vehicles do.
Can you point me to an image or video so I can see where is this timing connector ? I can't find under passenger side carpet...
vikasintl is offline   Reply With Quote
Old 09-15-2011, 10:55 PM   #12
95 S_Trucker
Registered User
 
95 S_Trucker's Avatar
 
Join Date: Oct 2009
Location: .
Posts: 2,178
Re: timing light does not shoot at steady 8

its up close to the fire wall and kick panel. a single wire connector, i cant remember what color the wire is
95 S_Trucker is offline   Reply With Quote
Old 09-16-2011, 06:33 AM   #13
68C15
blood type; Retumbo
 
68C15's Avatar
 
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
Re: timing light does not shoot at steady 8

tan with a black stripe
__________________
Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card
68C15 is offline   Reply With Quote
Reply

Bookmarks

Tags
engine mounts, rough idle, timing, vibration

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:20 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com