|
05-28-2017, 01:05 PM
|
#1 |
|
BlahBlahBlah
 Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,773
|
Rear end questions
So I have a couple of extra chassis I'm going to be getting rid of. A 67 C10 that had V8 and factory OD. I also have a 69 C10 chassis that had a V8 and factory OD. I have another but I'm not sure what it is or what engine trans it had in it (I think its a 68). My panel body is resting on it right now while I'm moving stuff around.
Any guesses if these are worth hanging on to? Do you have an idea on what the ratio would have been by the little bit of info Ive given? Anything else worth saving on these before they get scrapped? Trailing arms are all good.
__________________
… … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291 |
|
|
|
05-28-2017, 01:28 PM
|
#2 |
|
Registered User
Join Date: Nov 2014
Location: Lincoln City DE
Posts: 1,292
|
Re: Rear end questions
standard was 3:73 and a 283
|
|
|
|
|
05-28-2017, 04:16 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: bisbee, arizona
Posts: 1,529
|
Re: Rear end questions
save everthing. you may need it or make good friends trading it
|
|
|
|
|
05-28-2017, 04:34 PM
|
#4 |
|
BlahBlahBlah
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,773
|
Re: Rear end questions
I wont need it for sure, but if it has value and one of the local guys needs something large like this I would definitely sell or make a trade of some sort.
__________________
… … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291 |
|
|
|
|
05-28-2017, 07:00 PM
|
#5 |
|
The Older Generation
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,329
|
Re: Rear end questions
If you can find the code letters on them you can look them up in the charts here.
http://67-72chevytrucks.com/vboard/s...d.php?t=578793 A couple of the code locations are posted in post #8 & #19. Only the first two or three letters are used depending on the year.... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
05-28-2017, 07:01 PM
|
#6 |
|
Registered User
Join Date: Mar 2013
Location: Campbellsville, KY
Posts: 888
|
Re: Rear end questions
This sentiment can only be carried so far and remain within reason, but remember: when it comes to parts or assemblies that aren't reproduced - they ain't making any more of them. Every time one is crushed it's one less that an enthusiast like yourself can use to revive their machine.
I'd be interested in a set of trailing arms if you were closer, but alas...
__________________
Alex V. ------ 1967 C10 Suburban, 350/NP435, Green/Green, PS, PB, HD cooling, charging, shocks, and springs. 1985 GMC C3500 SRW, Sierra Classic, 454/TH400, white/blue. |
|
|
|
|
05-29-2017, 11:02 AM
|
#7 |
|
BlahBlahBlah
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,773
|
Re: Rear end questions
Ill have to make a trip out to the farm this week and see if I can find the codes. I was thinking since they were both factory OD trucks something might be different on the rears compared to non OD.
__________________
… … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
