The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-10-2017, 12:03 PM   #1
Burbnasty
Registered User
 
Join Date: Mar 2015
Location: Michigan
Posts: 47
Picked this up last night- 1970 4x4 need to make decision

I have a ridiculous amount of questions moving forward, but for now I need to make a decision.

I picked up a 1970 3/4 ton suburban, it has 34,000 original miles, it was a well optioned fire chief truck.

It currently has no motor, trans or transfer case and I purchased as a roller.

I had a 1970 4x4 2500 truck that I sold last year. The axles were very very difficult to find parts for, I believe they were a one year only axle.

The suburban has the original axles currently in it, I know the brake drums are no longer made along with other parts. The current axles are 4.10 or 4.11 gear. The truck is still at the old owners property, and I will soon pick it up, he has offered to swap the rear axle out with another dana 44 with 3.73 gears and throw in a set of 4.10 gears to match the front.

He also has a 14 bolt with a matching front axle out of an 80s 1 ton that I could purchase for an additional price.

I don't know my future plans, (tire size, lift if any, etc.) so i'm up in the air on gears but I would say I would a least run a 32 tire, and I plan to have an OD trans.

I need to make decision on axles before I take is soon.

I realize this is a lot to process, but I'm just looking for some direction, should I ....

Keep the original axles?

Swap the rear out with a 14 bolt dana 44 that currently has 3.73, and swap 4.11?

Purchase the axle out of the 1986 one ton with the matching 4.10 gears?

If this should be posted in the 4x4 section let me know...
Attached Images
  
Burbnasty is offline   Reply With Quote
Old 12-10-2017, 12:21 PM   #2
dozerbill72
Senior Member
 
dozerbill72's Avatar
 
Join Date: Oct 2015
Location: Berryville Arkansas
Posts: 402
Re: Picked this up last night- 1970 4x4 need to make decision

Keep the original axles. You said the current owner wanted to put a D44 in the rear, that is a 1/2 ton axle more than likely.The rear that is in it is bullet proof plus it has a factory installed locker in it. The front is very easy to convert to disk brakes it can be done with factory parts. That is a very nice Burb you got there. Disk brake the front and enjoy it.
dozerbill72 is offline   Reply With Quote
Old 12-10-2017, 12:28 PM   #3
Bigdav160
Registered User
 
Bigdav160's Avatar
 
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,852
Re: Picked this up last night- 1970 4x4 need to make decision

That Suburban appears to be in excellent condition and well optioned.

With the low miles I wouldn't expect anything to be wrong with the axles. Seals and bearings are available. I would keep them. Especially with the locker already in the rear.

On my Suburban, the previous owner replaced the Eaton rear axle with a '75 14 bolt after pinion bearing leak/failure. When I got it 4x4 was inoperative due to the mismatched 3.73 rear and 4.10 front ratios. Eventually I went with 3.73's, 33 inch tires front and rear lockers and a 700R4 transmission. I'm sure I would have been just as happy with 4.10s. There's not a big difference between the two RPM wise.
__________________
My Classics:
'72 K20 Suburban + '65 Dodge Town Wagon
'72 Corvette Roadster +'67 Corvette Roadster
'73 Z-28 Camaro
'63 Ford SWB Uni Pickup
'50 Ford Coupe
Bigdav160 is offline   Reply With Quote
Old 12-10-2017, 12:56 PM   #4
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,681
Re: Picked this up last night- 1970 4x4 need to make decision

I would keep the original axles and look into a disc brake swap in the future, or since it is on a trailer, just swing by MN and drop it off here...
That is a nice looking rig.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 12-10-2017, 02:46 PM   #5
Burbnasty
Registered User
 
Join Date: Mar 2015
Location: Michigan
Posts: 47
Re: Picked this up last night- 1970 4x4 need to make decision

Thanks for the responses.
If I were to keep the factory axles I would need to do a 4 wheel disc brake conversion due to brake parts not being available correct?
Does someone make a conversion specifically for that axle?
Burbnasty is offline   Reply With Quote
Old 12-11-2017, 12:11 AM   #6
Livrat
Member #1049
 
Livrat's Avatar
 
Join Date: Jun 2000
Location: Troy Montana
Posts: 3,940
Re: Picked this up last night- 1970 4x4 need to make decision

Quote:
Originally Posted by Burbnasty View Post
Thanks for the responses.
If I were to keep the factory axles I would need to do a 4 wheel disc brake conversion due to brake parts not being available correct?
Does someone make a conversion specifically for that axle?
The front is the easiest to do as 1970 was the first year of the open knuckle front axle, just with drum brakes, all that is needed for the front conversion is any 1971 through about 1980 3/4 ton spindles, rotors, hubs, caliper mounts and calipers, its all a direct bolt on. You will also have to use a disc brake master cylinder and proportioning valve

The the rear HO52 axle here is a thread on using all the 14 bolt drum brakes on it
http://67-72chevytrucks.com/vboard/s...d.php?t=536119
Livrat is online now   Reply With Quote
Old 12-11-2017, 08:56 AM   #7
68panelman
Registered User
 
68panelman's Avatar
 
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,434
Re: Picked this up last night- 1970 4x4 need to make decision

That's a really nice burb. I'm with the gang, leave the axles but upgrade if you need to. My trucks are still all drum and work great, you just drive em differently than your newer vehicles. More pictures when you can please.
68panelman is online now   Reply With Quote
Old 12-11-2017, 05:13 PM   #8
shearjs
Registered User
 
shearjs's Avatar
 
Join Date: Mar 2011
Location: Thompsons Station, TN
Posts: 700
Re: Picked this up last night- 1970 4x4 need to make decision

Nice looking Burb! Completely off topic, but did you have any trouble getting that beast to fit on that trailer? I'm planning on making a trip to look at a Burb this week and was considering using a Uhaul myself. Sorry to dirty up your thread. Thanks!
shearjs is offline   Reply With Quote
Old 12-12-2017, 12:57 AM   #9
Burbnasty
Registered User
 
Join Date: Mar 2015
Location: Michigan
Posts: 47
Re: Picked this up last night- 1970 4x4 need to make decision

shearjs: your not dirtying up the thread at all, I'm glad I can actually help with something!

That picture is actually from the old owner, I've not yet picked the burb up yet as it is still being stored at the previous owners. I just didn't have any other pics of it and was eager to show it off. So I've never personally hauled it on that trailer...........However a friend of mine sold a 1974 caprice to Indiana, from Northern Michigan, I was going down for the holidays anyway, so I hauled it down for him. Instead of towing my trailer down and hauling for the rest of the time spent at the in-laws I rented a "one way trailer" from U-haul. Big mistake. I rented a trailer like the one in the picture, it was miserable. It is not meant for a car or truck that large. It death wobbled over 55 mph, we were all car sick, it was not safe, and my wife was not happy. I highly recommend against the uhaul trailer if you have any other options. If you must use a trailer like that do not tell them what you are hauling on it.
Good luck with your trip, if you use that trailer, don't bring your wife along... trust me!
Burbnasty is offline   Reply With Quote
Old 12-24-2017, 04:43 PM   #10
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,337
Re: Picked this up last night- 1970 4x4 need to make decision

I would agree that being a nicely optioned an low mileage Burb ... keep it has original as possible.
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Old 12-26-2017, 06:53 PM   #11
Orangetwk
Registered User
 
Orangetwk's Avatar
 
Join Date: May 2017
Location: Springfield virginia
Posts: 16
Re: Picked this up last night- 1970 4x4 need to make decision

You could just sell it to me
Orangetwk is offline   Reply With Quote
Old 12-26-2017, 07:27 PM   #12
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Picked this up last night- 1970 4x4 need to make decision

I can see keeping the original axles, but can you get the 1 ton stuff at a decent price? The front end should be a Dana 60 and those are the strongest axles you can get for the front. They also fetch around a grand a lone. So if he's willing to sell you them at a good price, I'd probably snag them. The D60 already has disc brakes and will go right under your burb. Only a collector would dock the truck for having a D60 IMO. It currently has no original engine and trans, and you plan to put in an overdrive trans in it, so I see no need to keep the D44 due to originality. If he wants a lot for the other axles then sure. Keep what you have and upgrade the brakes.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com