How do you Convert non-gauge to gauge cluster? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10crazy · 06-04-2005, 11:09 AM

I went to GMCPauls site for this and don't undertand it. Can someone simplify this for an electrical moron like me?

72K10 · 06-04-2005, 03:17 PM

If you're taking it from a donor truck, just take the electrical harness under the dash with it, and the simple engine compartment harness as well. Then it's just a matter of swapping things out. Make sure you get the oil line from the block to the oil gauge as well.

06-04-2005, 11:09 AM	#1
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	How do you Convert non-gauge to gauge cluster? I went to GMCPauls site for this and don't undertand it. Can someone simplify this for an electrical moron like me? __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

06-04-2005, 03:17 PM	#2
72K10 Registered User Join Date: Dec 1999 Location: New York Posts: 288	If you're taking it from a donor truck, just take the electrical harness under the dash with it, and the simple engine compartment harness as well. Then it's just a matter of swapping things out. Make sure you get the oil line from the block to the oil gauge as well. __________________ RLTW 70C10 72K10 72K10 Cheyenne 72C10 Cheyenne Super



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.