Anybody else here have a stepper with a 4/6 drop? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 05-04-2005, 12:56 AM

I'm trying to figure out some wheel and tire combos.

thanks,

Bryan

70 shorty · 05-04-2005, 03:52 PM

I know Randy70C10 has a drop on his shortstep, but I can't remember how much. I've seen it in person and it looks good. He's got some pics in his profile.

LUV2XCLR8 · 05-04-2005, 04:14 PM

The one I sold GENIIISHORTY has a 4/6 drop, here is the best picture
I have saved of it, I ran the Front - 205/60/15 and Rear - 295/50/15,
the pic I have attached has taller tires on it, before I switched them,
sorry Brian, but I don't have any pic's with the tires above on it.

5150 · 05-04-2005, 07:49 PM

No problem,

I'm pretty sure I'm just going to go with 255/60/17's up front and 275/60/17's in the rear. I just thought maybe somebody had a pic of this particular setup. There aren't any pics in the Sticky: Wheel/Tire Combo at the top of the page.

**special-K** · 05-04-2005, 09:44 PM

Check out the tire fitment sticky.

5150 · 05-04-2005, 09:47 PM

I checked that out the only one on there that is close to what I'm wanting to do is Txfirefighter's old green truck and I can't get a real good look at the tire/fender holes because of the angle of the pic.

CG · 05-04-2005, 09:48 PM

txfire's old truck has a 4/6. i think the new owner finished it. maybe someone can post a link to those pics. sorry i dont have any of em saved.

05-04-2005, 12:56 AM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Anybody else here have a stepper with a 4/6 drop? I'm trying to figure out some wheel and tire combos. thanks, Bryan __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-04-2005, 03:52 PM	#2
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	I know Randy70C10 has a drop on his shortstep, but I can't remember how much. I've seen it in person and it looks good. He's got some pics in his profile. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

05-04-2005, 04:14 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	The one I sold GENIIISHORTY has a 4/6 drop, here is the best picture I have saved of it, I ran the Front - 205/60/15 and Rear - 295/50/15, the pic I have attached has taller tires on it, before I switched them, sorry Brian, but I don't have any pic's with the tires above on it. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 10-23-2005 at 08:45 AM.

05-04-2005, 07:49 PM	#4
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	No problem, I'm pretty sure I'm just going to go with 255/60/17's up front and 275/60/17's in the rear. I just thought maybe somebody had a pic of this particular setup. There aren't any pics in the Sticky: Wheel/Tire Combo at the top of the page. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-04-2005, 09:44 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Check out the tire fitment sticky. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-04-2005, 09:47 PM	#6
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	I checked that out the only one on there that is close to what I'm wanting to do is Txfirefighter's old green truck and I can't get a real good look at the tire/fender holes because of the angle of the pic. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-04-2005, 09:48 PM	#7
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,788	txfire's old truck has a 4/6. i think the new owner finished it. maybe someone can post a link to those pics. sorry i dont have any of em saved.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.