AZ Cabs for parts/pieces

[In The Ten Ring]

Do you still have any good cab corners left?

What about this piece here (behind driver's side of the seat)? It would be much better for me if this could come with the driver's side cab corner attached.

[t korinek]

Out of town right now,ill check on those cab cuts when I'm back this weekend
Thanks
Tom

[72tutone]

Tom-
I know your out of town but I need some more cuts off a cab.

I'm looking for the following -

Upper right and left corner of windshield, and the lower right and left around the curve on bottom.

Thanks for checking when you get back.

[mjgord51]

Don't cut the 67 cab I might want the hole complete cab. whats the low down on body rot areas, need more pics of the cab, mjgord51

[t korinek]

Originally Posted by mjgord51

Don't cut the 67 cab I might want the hole complete cab. whats the low down on body rot areas, need more pics of the cab, mjgord51

Mjgord51 your a little late for the party, the 67 cab is just a skeleton now...
Posted via Mobile Device

[t korinek]

72tutone Here's pics of the cab have for parts $100 + shipping for all 4 corners If they will work for you, bottom driver section may be cut a little short, if it is I can get another piece off another cab.

In the Ten Ring Forgot about your cab corner section, do you still need it?

Last pic is whats left of the 67 cab

[72tutone]

Tom, how much just for the top upper left/right cuts to 63385? You just show the upper right patch? Is the cab with the windshield on it the upper left donor patch?
Is the shape and quality the same? I'm a little tight with $ so I might have to get back to you on the lower patches
Thanks, Matt

[In The Ten Ring]

Originally Posted by t korinek

72tutone Here's pics of the cab have for parts $100 + shipping for all 4 corners If they will work for you, bottom driver section may be cut a little short, if it is I can get another piece off another cab.

In the Ten Ring Forgot about your cab corner section, do you still need it?

Last pic is whats left of the 67 cab

Ya I still need it. Can you hook what I have in the pic into a cab corner?

[70 stepside]

Tom...do have any cabs for sale that come with a title

[Ol 67 C10]

Sorry for the delay, it's been a while but I had asked about a cutout around the gas pedal. Do you have anything like that left? Thanks, Wes

[72tutone]

Originally Posted by 72tutone

Tom, how much just for the top upper left/right cuts to 63385? You just show the upper right patch? Is the cab with the windshield on it the upper left donor patch?
Is the shape and quality the same? I'm a little tight with $ so I might have to get back to you on the lower patches
Thanks, Matt

Tom-
How much for just the top two windshield cuts left/right shipped to 63385

Thanks,
Matt

[t korinek]

Pics for in the ten ring, floor piece is solid, corner has a dent & some rust coming through down low, $25 + shipping

72tutone $63 shipped for both upper cab pieces

ol67c10, I still have that area of the floor available.

70 stepside, I have a few cabs if you want to come look.

djgebert, missed your post, I have a good low hump area $45 + shipping.

Thanks,
Tom

[Ol 67 C10]

I'd be interested in a cutout of where the gas pedal studs are on the floor, if you decide to cut the cab up. I only need about a 10"x10" pc. Shipping to 22830 VA. Thanks!

[t korinek]

ol 67 c10 $33 shipped for that 10x10 piece

[72tutone]

Tom-
Please PM me so I know where to send the $$ for those cab pieces

[Tilldogg]

Hello
Im looking for the passenger side A Pillar to the cab section i have attached a pic of the part i need if possible,

can you help please

[t korinek]

pics for tutone & tilldog, just surface rust.

[mjgord51]

I know I was a little late on the hole cab, maybe luck will be in my favor on this- any Heater Control Panels with all good levers? mjgord51

[Tilldogg]

T Korinek
Hi there, this is fine with me, when can u cut out and ship, mine is a 1970 c10 suburban fyi, i will take it please, the c10 cab is the same as the suburban right at the front,
give me a total and i will send u the funds via paypal, are you able to ship to England if not the zip code is my brother and he can forward on,
the body shop is waiting for this ingredient
Tilldogg

[72tutone]

Tom-
I will take the cuts from the white cab.
Paypal sent. Please cut 8.5" length
Thanks
Matt

[Tilldogg]

Originally Posted by Tilldogg

T Korinek
Hi there, this is fine with me, when can u cut out and ship, mine is a 1970 c10 suburban fyi, i will take it please, the c10 cab is the same as the suburban right at the front,
give me a total and i will send u the funds via paypal, are you able to ship to England if not the zip code is my brother and he can forward on,

Tilldogg

if you can cut 9 inches down the pillar or more and 8 inches ish back and the front and some of the cab please, like the photo just more of it so we can cut to fit, thank you

[t korinek]

mjgord - Here's pics of the heater controller, in good working condition, face rivits are tight & no broken levers, has a some wear on the face, good for a driver.
$50 shipped

[mjgord51]

Thanks anyway I have seen same condition here for $35.00 shipped, if you'll do that I'll take it.

[Elliot949]

I need the outer 10" of the floor that connects to the Rockers from the lower firewall to as close to the cab corner as possible...

Let me know shipped to 67156

[djgebert]

Originally Posted by t korinek

Pics for in the ten ring, floor piece is solid, corner has a dent & some rust coming through down low, $25 + shipping

72tutone $63 shipped for both upper cab pieces

ol67c10, I still have that area of the floor available.

70 stepside, I have a few cabs if you want to come look.

djgebert, missed your post, I have a good low hump area $45 + shipping.

Thanks,
Tom

Thanks, I will take the low hump cut. Let me know the full price to 46835 and how to get you paid. Thanks again!