If your into models, check this out... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**fine69** · 11-15-2008, 02:53 AM

Hey. Very hard to find model on Ebay.

Let alone never opened.

http://cgi.ebay.com/AMT-1972-GMC-SIE...3286.m20.l1116

**special-K** · 11-15-2008, 08:47 AM

WOW!! Looks brand new.You didn`t buy it? Hoowee,that`s spicey,though.I`d be real tempted if I didn`t have one.Mine`s complete,opened,with patina.

**Boog** · 11-15-2008, 08:59 AM

That reminds me of one I had. It was a 68 Chevy long fleet with tilt tandem wheeled trailer and a dirt track racer all in one kit. The truck could be built with the stock long fleet bed or a wrecker bed. Bought back in 68 and I believe it was an AMT kit. Wow, 40 years ago.

67ChevyRedneck · 11-20-2008, 05:23 PM

Is that a shorty? Sweet!

*gulp* $150!

rambler · 11-20-2008, 07:25 PM

cool,, but $150.. I would be too tempted to build it...

ratpackv8sonly · 11-20-2008, 08:05 PM

I will soon have all the GMC parts in resin for sale to build that kit. The last thing I need to make a mold of is the long bed sides so I can cut them down a make a mold of them in a short bed.

67ChevyRedneck · 11-20-2008, 08:10 PM

Quote:

Originally Posted by ratpackv8sonly

I will soon have all the GMC parts in resin for sale to build that kit. The last thing I need to make a mold of is the long bed sides so I can cut them down a make a mold of them in a short bed.

Woah.... you make resin kits of these trucks????

Website/info please?

ratpackv8sonly · 11-20-2008, 08:19 PM

Yes I do. Just not complete kits yet. Just corrected short wheel base frames with way more detail. I make a 67-68 front end conversion for the current 1972 kit thats out, plain jane CHEVROLET fleetside tailgate, 69 and 70 grills and hood. resin short stepside (working on the mold for the long bed sides now) and two different short fleetside beds. One with full trim and one without trim. I will soon do complete kits but they will be a little more than a plastic kit but nowhere close to a $100. Check my other post and you will see some of my pictures of the parts. No web site. Just ebay and here. My prices for here will be almost half what I sell them for on ebay.

67ChevyRedneck · 11-21-2008, 11:44 AM

Ahhhhhhhhh, I think I've seen your grills on ebay before

I have yet to see one of your short beds on ebay though.

What's your ebay ID, I did a quick check and didn't see anything currently listed.

Do you also make a correct 67/68 hood to go with the grill?

ratpackv8sonly · 11-22-2008, 03:41 PM

Have not listed in a while as it takes hours pouring an finishing the parts to sell. My ebay name is ratpackv8sonly. If I remember correctly I only listed 6 frames and I think only two beds the last time. If you check my post in the diecast section I have pictures of my items. Also the 67-68 conversion includes the correct 67-68 hood, grill, a grill insert that has to be molded into the body to make the 67-68 front end and a front bumper. These are in tan resin and have to be chrome plated.

11-15-2008, 02:53 AM	#1
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	If your into models, check this out... Hey. Very hard to find model on Ebay. Let alone never opened. http://cgi.ebay.com/AMT-1972-GMC-SIE...3286.m20.l1116 __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

11-15-2008, 08:47 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: If your into models, check this out... WOW!! Looks brand new.You didn`t buy it? Hoowee,that`s spicey,though.I`d be real tempted if I didn`t have one.Mine`s complete,opened,with patina. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-15-2008, 08:59 AM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,957	Re: If your into models, check this out... That reminds me of one I had. It was a 68 Chevy long fleet with tilt tandem wheeled trailer and a dirt track racer all in one kit. The truck could be built with the stock long fleet bed or a wrecker bed. Bought back in 68 and I believe it was an AMT kit. Wow, 40 years ago. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-20-2008, 05:23 PM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: If your into models, check this out... Is that a shorty? Sweet! gulp $150! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-20-2008, 07:25 PM	#5
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: If your into models, check this out... cool,, but $150.. I would be too tempted to build it... __________________ No matter where you are..... There you are... Buckaroo Banzi

11-20-2008, 08:05 PM	#6
ratpackv8sonly Registered User Join Date: Mar 2008 Location: Las Cruces New Mexico Posts: 214	Re: If your into models, check this out... I will soon have all the GMC parts in resin for sale to build that kit. The last thing I need to make a mold of is the long bed sides so I can cut them down a make a mold of them in a short bed.

11-20-2008, 08:19 PM	#8
ratpackv8sonly Registered User Join Date: Mar 2008 Location: Las Cruces New Mexico Posts: 214	Re: If your into models, check this out... Yes I do. Just not complete kits yet. Just corrected short wheel base frames with way more detail. I make a 67-68 front end conversion for the current 1972 kit thats out, plain jane CHEVROLET fleetside tailgate, 69 and 70 grills and hood. resin short stepside (working on the mold for the long bed sides now) and two different short fleetside beds. One with full trim and one without trim. I will soon do complete kits but they will be a little more than a plastic kit but nowhere close to a $100. Check my other post and you will see some of my pictures of the parts. No web site. Just ebay and here. My prices for here will be almost half what I sell them for on ebay.

11-21-2008, 11:44 AM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: If your into models, check this out... Ahhhhhhhhh, I think I've seen your grills on ebay before I have yet to see one of your short beds on ebay though. What's your ebay ID, I did a quick check and didn't see anything currently listed. Do you also make a correct 67/68 hood to go with the grill? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-22-2008, 03:41 PM	#10
ratpackv8sonly Registered User Join Date: Mar 2008 Location: Las Cruces New Mexico Posts: 214	Re: If your into models, check this out... Have not listed in a while as it takes hours pouring an finishing the parts to sell. My ebay name is ratpackv8sonly. If I remember correctly I only listed 6 frames and I think only two beds the last time. If you check my post in the diecast section I have pictures of my items. Also the 67-68 conversion includes the correct 67-68 hood, grill, a grill insert that has to be molded into the body to make the 67-68 front end and a front bumper. These are in tan resin and have to be chrome plated.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.