47-55.1 B 31 Guide lights. My new reverse lights. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Matt_50 · 10-07-2019, 11:53 PM

I got my hands on one of these and decided to get another. I think they will be cool reverse lights mounted on brackets above my brake lights.

Has anyone here used these before? Where could I find the right gaskets?

I'm also tossing around a couple ideas on what to do about the threaded rods. Cut close and drill through then use a new bolt. Or weld it carefully to new brackets. Or possibly try to rethread. Thoughts? Ideas? Suggestions?

mr48chev · 10-08-2019, 02:53 AM

Gaskets you may have to make. Your choice of gasket material.

I'd take the light apart and see how the stud is fastened to it. It may be a lot simpler to take care of than you think.

Matt_50 · 10-08-2019, 08:20 AM

I was afraid of that. Thankfully one has an old gasket I can copy. I think the stud is pressed in.

Matt_50 · 10-11-2019, 08:18 AM

Cut the studs off and drilled through them. Worked like a charm! Cut, drilled, and painted some brackets and I hope to have them on this weekend.

cmayna · 10-29-2019, 11:51 AM

How were/are you going to activate these lights once in place? Separate switch or activated by the shifter?

Matt_50 · 10-29-2019, 12:00 PM

My wiring harness has wires for them and I have a safety switch on my column.

mr48chev · 10-29-2019, 12:45 PM

That is going to turn out pretty slick.

Matt_50 · 10-29-2019, 01:41 PM

Here's a pic of them installed.

10-07-2019, 11:53 PM	#1
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	B 31 Guide lights. My new reverse lights. I got my hands on one of these and decided to get another. I think they will be cool reverse lights mounted on brackets above my brake lights. Has anyone here used these before? Where could I find the right gaskets? I'm also tossing around a couple ideas on what to do about the threaded rods. Cut close and drill through then use a new bolt. Or weld it carefully to new brackets. Or possibly try to rethread. Thoughts? Ideas? Suggestions? Attached Images __________________ 1950 Build

10-08-2019, 02:53 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,284	Re: B 31 Guide lights. My new reverse lights. Gaskets you may have to make. Your choice of gasket material. I'd take the light apart and see how the stud is fastened to it. It may be a lot simpler to take care of than you think. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-08-2019, 08:20 AM	#3
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: B 31 Guide lights. My new reverse lights. I was afraid of that. Thankfully one has an old gasket I can copy. I think the stud is pressed in. Attached Images __________________ 1950 Build

10-11-2019, 08:18 AM	#4
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: B 31 Guide lights. My new reverse lights. Cut the studs off and drilled through them. Worked like a charm! Cut, drilled, and painted some brackets and I hope to have them on this weekend. __________________ 1950 Build

10-29-2019, 11:51 AM	#5
cmayna Registered User Join Date: Oct 2018 Location: Menlo Park, CA Posts: 90	Re: B 31 Guide lights. My new reverse lights. How were/are you going to activate these lights once in place? Separate switch or activated by the shifter? __________________ Craig My truck '50 Chevy 3100-5 window If I'm not working on my truck, I'm fishing with the wife or smoking Salmon.

10-29-2019, 12:00 PM	#6
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: B 31 Guide lights. My new reverse lights. My wiring harness has wires for them and I have a safety switch on my column. __________________ 1950 Build

10-29-2019, 12:45 PM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,284	Re: B 31 Guide lights. My new reverse lights. That is going to turn out pretty slick. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-29-2019, 01:41 PM	#8
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: B 31 Guide lights. My new reverse lights. Here's a pic of them installed. Attached Images __________________ 1950 Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.