Working Man's Burbon

[HO455]

(Quote) What was the problem you had with the fixed 1/4 window seals? As mentioned above I used the Precisions on my '69 Suburban with no issues....

LockDoc

Here is my text from post 42 explaining the issue. I am unable to copy the drawing to this post so you'll have to scroll back. For some reason they had to remake the mould and it didn't get a check for proper fit, and got made then shipped out. I have heard of 2 other people here locally that received bad ones too.

Originally Posted by HO455

It looks as if the current batch of seals may have a different problem. The lengths looked fine on the ones I saw but they were laid out wrong. See my crude drawing to understand. It isn't a mirror image but something different with the thin side on wrong side and the angles backwards.

Here

[LockDoc]

Originally Posted by HO455

(Quote) What was the problem you had with the fixed 1/4 window seals? As mentioned above I used the Precisions on my '69 Suburban with no issues....

LockDoc

Here is my text from post 42 explaining the issue. I am unable to copy the drawing to this post so you'll have to scroll back. For some reason they had to remake the mould and it didn't get a check for proper fit, and got made then shipped out. I have heard of 2 other people here locally that received bad ones too.

OK, I have a couple of Rear 3rd doors and I will take one apart and try the gaskets I have on it. The set I have left appear to be like the Precision you have pictured so maybe I received gasket sets from 2 different manufacturing runs. It may be a day or two before I get to it....

LockDoc

[HO455]

At your convenience. No rush here. It's going to be really wet here for a week or so and I will have other things to attend to. Enjoy your weekend.