Flowmasters - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue_71 · 11-03-2002, 01:03 PM

Both mufflers and tubing are fabricated from aluminized steel for corrosion resistance.

http://www.flowmastermufflers.com/web10/indexf5.html

might want to check into it, you might get one

Maximum Overdrive · 11-03-2002, 01:34 PM

I once put some $10 ones on my truck. They sounded pretty good....acutally very good. Just about everyone who heard them thought I spent a fortune on them. They only lasted a couple years but hey for $10 bucks I coudnt complain.

Blackhawkdc · 11-03-2002, 02:41 PM

My 2 cents, do some calling around to exhaust shops around you. Not Midas or lowly joints like that, but actual custom exhaust shops. they'll listen to what you're after and recommend a muffler for you. I work at a shop and do custom exhaust bending and form what it sounds like, a Rhino muffler, made by IPC, is the thing for you. We also carry a muffler called a Flo-Pro that has a very similar sound to the Slowmaster, but seems like a much tougher build. Instead of the stupid "V" channels inside, it is pretty much open with the inlet and outlet tubs extending past halfway inside with scoops inside. Great sounding muffler. Had them on my '69 Stepside and lved them. I've still got the system in the shed, the only reason I took them off was when I put my 440 hp engine in, I went with a full 3" duals setup. So check with a local Exhaust shop, they'll give you a recommendation and probably even sell you the muffler you need, for quite a bit cheaper than the flowmaster. the Rhino from us runs about $40 for your S-10 and the Flo-Pro about $55-60. So the cost is a major difference.

6772king · 11-03-2002, 05:10 PM

going to agree with mooneyes we make S&K mufflers that i think sound just as good if not better and we make them from 14 ga galv steel so it would teke a long time to rust out if your interested we will make you a couple for free just have to come and get them also have a 425 cad thats locked up you can have if you want complete long block. me and moon will meet you half way if you want the stuff

6772king · 11-03-2002, 05:58 PM

hey longhorn i know its not a good pic but mooneyes said you wanted to see this500 (2)

6772king · 11-03-2002, 06:08 PM

ok didnt work i got pics of my longhorn i wanted to post also i will have to have mooneyes show me how to attach a pic sorry

Longhorn Man · 11-03-2002, 07:49 PM

Wow...way beyond tempting...but I am unable to do anything like that right now. *insert cussing smiley here*
Between the normal financial things...and my mother in law possably on her death bed, (involving a road trip tp New Orleans) I can't afford jack right now.

*Piston* · 11-03-2002, 07:58 PM

longhornmail, if you roll through Kansas City... I'll hook you up with a muffler of some sorts.

I know thats not why you started this thread, but im offering anyway

lol

Ratpowerd67 · 11-03-2002, 08:54 PM

i run Dynomax ultra-flow welded mufflers and the are WAY louder than my old 40s flowmasters. these mufflers are VERY aggresive.

Longhorn Man · 11-03-2002, 11:26 PM

Wow, thanks Piston...I keep tellin everyone I know that this board is FULL of awsome ppl!
On the mother in law thing, turns out it may well be a false alarm. My father in law is a crack head, (no joke...big time user) and as soon as the DR said it might be time for araingements...he hears "blah blah blah Make araingements."
Damn crack head....I've hated the b@stard for 11 years now, and will for the rest of his life.
Granted, she is sick and on a dialisis machine now, but not on her death bed.

View Poll Results: Should a $80 muffler last more than a few years?
Your right...Flows suck	13	27.66%
No problem with mine...you have crappy luck.	24	51.06%
OEM $10 deal should be good enough for the Kroger Cruiser	4	8.51%
Get the Thrush, to h*ll with the neighbors who sleep all day.	7	14.89%
Multiple Choice Poll. Voters: 47. You may not vote on this poll

11-03-2002, 01:34 PM	#27
Maximum Overdrive December 21, 2012 Join Date: Apr 2000 Location: Black Eagle, Montana Posts: 1,634	I once put some $10 ones on my truck. They sounded pretty good....acutally very good. Just about everyone who heard them thought I spent a fortune on them. They only lasted a couple years but hey for $10 bucks I coudnt complain. __________________ *"!Ama Sua, Ama Kjella, Ama Lllulla!"*

11-03-2002, 02:41 PM	#28
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	My 2 cents, do some calling around to exhaust shops around you. Not Midas or lowly joints like that, but actual custom exhaust shops. they'll listen to what you're after and recommend a muffler for you. I work at a shop and do custom exhaust bending and form what it sounds like, a Rhino muffler, made by IPC, is the thing for you. We also carry a muffler called a Flo-Pro that has a very similar sound to the Slowmaster, but seems like a much tougher build. Instead of the stupid "V" channels inside, it is pretty much open with the inlet and outlet tubs extending past halfway inside with scoops inside. Great sounding muffler. Had them on my '69 Stepside and lved them. I've still got the system in the shed, the only reason I took them off was when I put my 440 hp engine in, I went with a full 3" duals setup. So check with a local Exhaust shop, they'll give you a recommendation and probably even sell you the muffler you need, for quite a bit cheaper than the flowmaster. the Rhino from us runs about $40 for your S-10 and the Flo-Pro about $55-60. So the cost is a major difference. __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America

11-03-2002, 05:10 PM	#29
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	going to agree with mooneyes we make S&K mufflers that i think sound just as good if not better and we make them from 14 ga galv steel so it would teke a long time to rust out if your interested we will make you a couple for free just have to come and get them also have a 425 cad thats locked up you can have if you want complete long block. me and moon will meet you half way if you want the stuff __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

11-03-2002, 05:58 PM	#30
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	hey longhorn i know its not a good pic but mooneyes said you wanted to see this500 (2) __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!! Last edited by 6772king; 11-03-2002 at 06:05 PM.

11-03-2002, 06:08 PM	#31
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	ok didnt work i got pics of my longhorn i wanted to post also i will have to have mooneyes show me how to attach a pic sorry __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

11-03-2002, 07:49 PM	#32
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Wow...way beyond tempting...but I am unable to do anything like that right now. insert cussing smiley here Between the normal financial things...and my mother in law possably on her death bed, (involving a road trip tp New Orleans) I can't afford jack right now.

11-03-2002, 07:58 PM	#33
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,301	longhornmail, if you roll through Kansas City... I'll hook you up with a muffler of some sorts. I know thats not why you started this thread, but im offering anyway lol

11-03-2002, 08:54 PM	#34
Ratpowerd67 Registered User Join Date: Aug 2002 Location: Trenton ,Texas Posts: 328	i run Dynomax ultra-flow welded mufflers and the are WAY louder than my old 40s flowmasters. these mufflers are VERY aggresive.

11-03-2002, 11:26 PM	#35
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Wow, thanks Piston...I keep tellin everyone I know that this board is FULL of awsome ppl! On the mother in law thing, turns out it may well be a false alarm. My father in law is a crack head, (no joke...big time user) and as soon as the DR said it might be time for araingements...he hears "blah blah blah Make araingements." Damn crack head....I've hated the b@stard for 11 years now, and will for the rest of his life. Granted, she is sick and on a dialisis machine now, but not on her death bed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.