71 K20 For Sale Ohio - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dean · 01-20-2004, 05:22 PM

1971 Chevy K20 4speed 350 NP205 4.11 gears Dana 44 front. Stainless Steel flatbed. Body is very rusty. I bought this years ago for another body swap, but I have decided I have enough K20s. Runs and drives, but would need going over. I haven't done anything to this truck. 350 doesn't appear to smoke or anything. Good headers go with truck. Chassis is in good shape with no rust out. Appears to have a body lift on it with 36" Humvee tires on rusty chrome slots. Any questions? Near Cincinnati Ohio $1200.00

Dean · 01-20-2004, 05:22 PM

2

Dean · 01-20-2004, 05:23 PM

3

Dean · 01-20-2004, 05:24 PM

4

Dean · 01-20-2004, 05:24 PM

5

Dean · 01-20-2004, 05:25 PM

6

Dean · 01-20-2004, 05:26 PM

7

Dean · 01-20-2004, 05:26 PM

8

Dean · 01-20-2004, 05:27 PM

9

Dean · 01-20-2004, 05:28 PM

10

Dean · 01-20-2004, 05:28 PM

11

Dean · 01-20-2004, 05:29 PM

12

griesel72 · 01-20-2004, 05:43 PM

I wish there was less highway between you and me, i could use another 4X4 for a swap

**JIMs70GMC** · 01-21-2004, 06:57 AM

Sent you a PM.

spencra · 01-21-2004, 09:58 AM

OH man, I want that truck.

According to e-bay those buckets and console could fetch $1200 alone

dmurphy68 · 01-21-2004, 10:16 AM

man day and and alot of $$$ short. lol I have been wanting a 4x4 but to many project and not enough $$ o well

**JIMs70GMC** · 01-21-2004, 11:16 AM

Sent another PM.

Dean · 01-21-2004, 11:26 AM

those aren't original buckets. I have no idea what they are out of. no console either.

spencra · 01-21-2004, 11:49 AM

oops, mistaken trash bag for center console

**JIMs70GMC** · 01-22-2004, 02:17 PM

Dean, worked a deal with your brother. Thanks, See you all in a couple months!

Dean · 01-23-2004, 09:53 AM

Sounds like it is sold. Should be a good start for a swap! That was the intent with this one, but we have enough trucks.

01-20-2004, 05:22 PM	#1
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	71 K20 For Sale Ohio 1971 Chevy K20 4speed 350 NP205 4.11 gears Dana 44 front. Stainless Steel flatbed. Body is very rusty. I bought this years ago for another body swap, but I have decided I have enough K20s. Runs and drives, but would need going over. I haven't done anything to this truck. 350 doesn't appear to smoke or anything. Good headers go with truck. Chassis is in good shape with no rust out. Appears to have a body lift on it with 36" Humvee tires on rusty chrome slots. Any questions? Near Cincinnati Ohio $1200.00 Attached Images

01-20-2004, 05:22 PM	#2
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	2 Attached Images

01-20-2004, 05:23 PM	#3
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	3 Attached Images

01-20-2004, 05:24 PM	#4
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	4 Attached Images

01-20-2004, 05:24 PM	#5
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	5 Attached Images

01-20-2004, 05:25 PM	#6
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	6 Attached Images

01-20-2004, 05:26 PM	#7
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	7 Attached Images

01-20-2004, 05:26 PM	#8
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	8 Attached Images

01-20-2004, 05:27 PM	#9
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	9 Attached Images

01-20-2004, 05:28 PM	#10
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	10 Attached Images

01-20-2004, 05:28 PM	#11
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	11 Attached Images

01-20-2004, 05:29 PM	#12
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	12 Attached Images

01-20-2004, 05:43 PM	#13
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	I wish there was less highway between you and me, i could use another 4X4 for a swap __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

01-21-2004, 06:57 AM	#14
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Sent you a PM. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-21-2004, 09:58 AM	#15
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	OH man, I want that truck. According to e-bay those buckets and console could fetch $1200 alone __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)



Register or Log In To remove these advertisements.

01-21-2004, 10:16 AM	#16
dmurphy68 Registered User Join Date: Nov 2002 Location: Middletown ohio Posts: 1,058	man day and and alot of $$$ short. lol I have been wanting a 4x4 but to many project and not enough $$ o well __________________ The very atmosphere of firearms everywhere restrains evil interference. When firearms go, all goes, we need them every hour. - George Washington No free man shall be debarred the use of arms - Thomas Jefferson Later Darren http://www.myspace.com/dmurphy68

01-21-2004, 11:16 AM	#17
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Sent another PM. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-21-2004, 11:26 AM	#18
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	those aren't original buckets. I have no idea what they are out of. no console either.

01-21-2004, 11:49 AM	#19
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	oops, mistaken trash bag for center console __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-22-2004, 02:17 PM	#20
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Dean, worked a deal with your brother. Thanks, See you all in a couple months! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-23-2004, 09:53 AM	#21
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	Sounds like it is sold. Should be a good start for a swap! That was the intent with this one, but we have enough trucks.

Register or Log In To remove these advertisements.