|
05-21-2020, 10:36 PM
|
#1 |
|
Registered User
Join Date: Aug 2011
Location: California
Posts: 53
|
1 ton wheels
I have a 1975 1 ton? that has split rims. It is the P30 chassis, so i don't know if that is any different than the 1 ton. This is not the 10 lug pattern with split rims, but the 8 lug. I read that most 8 lugs are the same minus some newer trucks. Will I be able to get generic Chevy steel wheels in the same 16" size and bolt them up?
 
|
|
|
|
05-23-2020, 02:28 AM
|
#2 |
|
Registered User
Join Date: Sep 2015
Location: Surrey, British Columbia
Posts: 4
|
Re: 1 ton wheels
Yes the 8 lug wheel pattern is the same. However the center hole may be slightly different. Make sure that you dont buy wheels that have a smaller center hole or you will need to break out a file or die grinder.
|
|
|
|
|
05-29-2020, 10:40 AM
|
#3 |
|
Registered User
Join Date: Nov 2013
Location: Blacksburg, VA
Posts: 289
|
Re: 1 ton wheels
Are those split rims or just a lock ring?
|
|
|
|
|
06-01-2020, 01:26 PM
|
#4 |
|
Registered User
Join Date: Jan 2014
Location: Fort Collins CO
Posts: 124
|
Re: 1 ton wheels
I think they will fit up to 2010 then the bolt pattern changed - of course you’ll need to verify hub will clear also....
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
