New to me Blazer - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Stitch* · 08-23-2010, 08:51 AM

I'll have to call you at 11 your time. That's when I goto lunch. If that's not ok just let me know. I'll check back on here shortly before I goto lunch. Thanks again fellas. This has already really helped out.

lvschevytrucks · 08-23-2010, 02:01 PM

Quote:

Originally Posted by gchemist

Nice upgrade. I wondered if it would get back on the road.

Ditch the metal fan. Install an Explorer 4.0 plastic fan. It will cool it better and A/C will rock!!

Quote:

Originally Posted by Fat Hoe

So I took some pics of the stuff I'm having a hard time with.

First off is this vacuum line. It comes off of a sensor that is bolted to the drivers side of the intake manifold. You can see it extending up over the manifold. It's in the center of the pics.

You can se in this picture there's about a 10 or12 gauge with a ring terminal on the end that runs down the passenger side of the manifold and around the back of the manifold. I jet pulled it up so I could take a pic.
you can also see the end of the vacuum line in the previous pic

here you can see some brackets and braces and a harness. The last two pics are pics of each end of the harness. Thanks alot fellas.

Chuck why didnt you ask me these questions, I can answer all of them I took it apart and Know how it goes together. Call me when you get a chance and Ill explain it to you. The wire your holding in your hand not attached its off the other engine, you dont need it. If you need me to Ill come over to your house and show you whats what

*Stitch* · 08-23-2010, 04:20 PM

I'll call you tonight when I get off work. Thanks Randy. I was gonna call ya. But either way I had to post the pics so you could see what I was talking about also.

gchemist · 08-23-2010, 07:45 PM

68C15 is correct on the fan swap. I guess you should go electric. I would opt for a two speed fan. Or at least a controller that can shut off the fan at highway speeds. You can install a bypass switch if necessary for long trips.

68C15 · 08-29-2010, 11:08 PM

BTW, I found that air cleaner boot we were talking about in a box in my garage today.

*Stitch* · 08-30-2010, 11:07 PM

that's awesome man...let me pm you my address and I need your address so I can send you some money...I went to the junk yard Sunday, but I struck out...

67ChevyRedneck · 08-31-2010, 11:44 PM

Cool, I like the s10 blazers. There's still a lot on the road down here.

lvschevytrucks · 09-01-2010, 01:13 PM

Quote:

Originally Posted by Fat Hoe

that's awesome man...let me pm you my address and I need your address so I can send you some money...I went to the junk yard Sunday, but I struck out...

are you talking about the broken piece for the Airfilter, Ive been asking for months, no one answered. good find.

palposity · 09-18-2010, 07:01 AM

How is this one coming Stitch?

*Stitch* · 09-22-2010, 10:26 PM

slow going..I need to work on it and get it running for Laura

*Stitch* · 10-07-2010, 09:57 PM

Finally got off my lazy butt and worked some on the blazer...I got the battery in, radiator and heater hoses hooked up, water pump pulley and fan installed, serp belt installed, radiator installed and air intake system installed...

I have a couple of questions on some stuff I'm having problems with though...

1. there are three spots for connectors on the coil...one up front and two in the rear under where the coil wire hooks up...I have the front one and the one on the passenger side in the rear...I cannot find the drivers side plug for the life of me...I need to know where to look...if I knew where the connector went back into the large harness I could trace it back and find it...the one on the passenger side goes into the harness about 5" from the plug.

2. I've got juice to everything now that the battery is hooked up, but I don't have turn signals....they don't work for some reason...where should I start to look...also, the dash lights don't come on with the headlights or parking lights...

thanks fellas...it feels really good to start working on this thing again...

lvschevytrucks · 10-14-2010, 12:53 PM

I think the turn signals need that flasher thats in the cup holder, and sorry but I dont remember on the coil

*Stitch* · 10-14-2010, 02:10 PM

You know where the flashed relay goes?
Posted via Mobile Device

68C15 · 10-15-2010, 06:59 AM

from memory the coil has a tower for the coil wire which leads to the cap, a 2 wire plug which feeds from the main harness (one pink and one white wire) which IIRC is a gray connector, and a short small harness (2 wire, also pink and white) with black connector that feeds to the ignition module.
I may have the connector colors mixed but the black one goes on first and then the gray one.

do you have tail lights? if not I can check today and see which wire to test at light switch. if tail lights do work I can tell you which wire to test at panel dimmer/dome switch.

I can't remember where the turn flasher is located, I'll have to check on that.

lvschevytrucks · 10-15-2010, 01:37 PM

Quote:

Originally Posted by Stitch

You know where the flashed relay goes?
Posted via Mobile Device

I had not found it yet that why I didnt replace it yet

Warrens69GMC · 10-16-2010, 12:45 AM

I believe the flasher relay is above the gas pedal in a little fuse box (goes beside the radio)

*Stitch* · 10-16-2010, 01:00 AM

thank you ....I'll check tomorrow when I get home from work and can take a look...thanks fellas

*Stitch* · 10-16-2010, 08:05 PM

Gotta little bit of progress done. Got the blazer on the concrete pads behind the shop and up on some 12 tons jack stands lol. Anyways, got the shocks on the rear glass and tailgate straightened out, they were mounted funny and needed some tlc. Also got the junkyard taillights in to replace the ricer taillights that were in there. Also figured outboth passenger side windows don't work for some reason. That'll have to wait until later. So now I have no excuse but to work on the poor thing lol

Posted via Mobile Device

*Stitch* · 10-16-2010, 08:06 PM

Also I have taillights and brakelights just no blinkers.
Posted via Mobile Device

68C15 · 10-17-2010, 06:44 AM

I'll try to remember to get the diagrams tomorrow and call you in the evening. same # as before?
as luck would have it we had a 95 come in on the hook Friday afternoon. no start with no fuel pump signal from the PCM. I can find the flashers and maybe, just maybe take a few pics of the wiring on the engine.

*Stitch* · 10-17-2010, 07:49 AM

Thanks buddy I really appreciate it. I'm not too sure if the number is the same so I'll pm it to ya again. Also, the real wiring issue I'm having is that one the back of the coil there are two connectors I have one of them but I don't know where the other one goes. There's also one on the front that I have also. I just can't find that other darn connector for the back of the coil. Thanks again man.

Chuck
Posted via Mobile Device

lvschevytrucks · 10-20-2010, 01:27 PM

I found one of the body bolts laying in the yard today Im sure its one of the front ones

68C15 · 10-20-2010, 04:22 PM

hazard flasher is located on convience center behind center of instrument panel (cluster)
TS flasher, behind knee bolster, near cigarette lighter

*Stitch* · 10-22-2010, 06:42 PM

Thanks fellas. I really appreciate the help and I'll be by soon to get that bolt
Posted via Mobile Device

spudz · 10-28-2010, 10:06 PM

take a pic of the plug your missing, Im sure I can tell you where it goes. I cant picture what one your talking about. you need me to come get this thing running for you? lol

08-23-2010, 08:51 AM	#26
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer I'll have to call you at 11 your time. That's when I goto lunch. If that's not ok just let me know. I'll check back on here shortly before I goto lunch. Thanks again fellas. This has already really helped out.

08-23-2010, 04:20 PM	#28
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer I'll call you tonight when I get off work. Thanks Randy. I was gonna call ya. But either way I had to post the pics so you could see what I was talking about also.

08-23-2010, 07:45 PM	#29
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: New to me Blazer 68C15 is correct on the fan swap. I guess you should go electric. I would opt for a two speed fan. Or at least a controller that can shut off the fan at highway speeds. You can install a bypass switch if necessary for long trips. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

08-29-2010, 11:08 PM	#30
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: New to me Blazer BTW, I found that air cleaner boot we were talking about in a box in my garage today.

08-30-2010, 11:07 PM	#31
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer that's awesome man...let me pm you my address and I need your address so I can send you some money...I went to the junk yard Sunday, but I struck out...

08-31-2010, 11:44 PM	#32
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: New to me Blazer Cool, I like the s10 blazers. There's still a lot on the road down here. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-18-2010, 07:01 AM	#34
palposity Registered User Join Date: Sep 2009 Location: Syracuse NY Posts: 684	Re: New to me Blazer How is this one coming Stitch? __________________ Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original. View Project Pops HERE Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig View Project Cletus HERE - SOLD DD--2008 Duramax CCSB

09-22-2010, 10:26 PM	#35
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer slow going..I need to work on it and get it running for Laura

10-07-2010, 09:57 PM	#36
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer Finally got off my lazy butt and worked some on the blazer...I got the battery in, radiator and heater hoses hooked up, water pump pulley and fan installed, serp belt installed, radiator installed and air intake system installed... I have a couple of questions on some stuff I'm having problems with though... 1. there are three spots for connectors on the coil...one up front and two in the rear under where the coil wire hooks up...I have the front one and the one on the passenger side in the rear...I cannot find the drivers side plug for the life of me...I need to know where to look...if I knew where the connector went back into the large harness I could trace it back and find it...the one on the passenger side goes into the harness about 5" from the plug. 2. I've got juice to everything now that the battery is hooked up, but I don't have turn signals....they don't work for some reason...where should I start to look...also, the dash lights don't come on with the headlights or parking lights... thanks fellas...it feels really good to start working on this thing again...

10-14-2010, 12:53 PM	#37
lvschevytrucks Unfinished Project Club Join Date: Jul 2005 Location: Florence S.C. Posts: 596	Re: New to me Blazer I think the turn signals need that flasher thats in the cup holder, and sorry but I dont remember on the coil __________________ Handle every Stressful situation like a dog. If you can't eat it or play with it, Pee on it and walk away. 1996 Dodge Intreped ES Nice car great on gas 1993 Jeep Cherokee. Looking for a swb chevy 73-87

10-14-2010, 02:10 PM	#38
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer You know where the flashed relay goes? Posted via Mobile Device

10-15-2010, 06:59 AM	#39
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: New to me Blazer from memory the coil has a tower for the coil wire which leads to the cap, a 2 wire plug which feeds from the main harness (one pink and one white wire) which IIRC is a gray connector, and a short small harness (2 wire, also pink and white) with black connector that feeds to the ignition module. I may have the connector colors mixed but the black one goes on first and then the gray one. do you have tail lights? if not I can check today and see which wire to test at light switch. if tail lights do work I can tell you which wire to test at panel dimmer/dome switch. I can't remember where the turn flasher is located, I'll have to check on that.

10-16-2010, 12:45 AM	#41
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,613	Re: New to me Blazer I believe the flasher relay is above the gas pedal in a little fuse box (goes beside the radio)

10-16-2010, 01:00 AM	#42
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer thank you ....I'll check tomorrow when I get home from work and can take a look...thanks fellas

10-16-2010, 08:05 PM	#43
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer Gotta little bit of progress done. Got the blazer on the concrete pads behind the shop and up on some 12 tons jack stands lol. Anyways, got the shocks on the rear glass and tailgate straightened out, they were mounted funny and needed some tlc. Also got the junkyard taillights in to replace the ricer taillights that were in there. Also figured outboth passenger side windows don't work for some reason. That'll have to wait until later. So now I have no excuse but to work on the poor thing lol Posted via Mobile Device



Register or Log In To remove these advertisements.

10-16-2010, 08:06 PM	#44
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer Also I have taillights and brakelights just no blinkers. Posted via Mobile Device

10-17-2010, 06:44 AM	#45
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: New to me Blazer I'll try to remember to get the diagrams tomorrow and call you in the evening. same # as before? as luck would have it we had a 95 come in on the hook Friday afternoon. no start with no fuel pump signal from the PCM. I can find the flashers and maybe, just maybe take a few pics of the wiring on the engine.

10-17-2010, 07:49 AM	#46
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer Thanks buddy I really appreciate it. I'm not too sure if the number is the same so I'll pm it to ya again. Also, the real wiring issue I'm having is that one the back of the coil there are two connectors I have one of them but I don't know where the other one goes. There's also one on the front that I have also. I just can't find that other darn connector for the back of the coil. Thanks again man. Chuck Posted via Mobile Device

10-20-2010, 01:27 PM	#47
lvschevytrucks Unfinished Project Club Join Date: Jul 2005 Location: Florence S.C. Posts: 596	Re: New to me Blazer I found one of the body bolts laying in the yard today Im sure its one of the front ones __________________ Handle every Stressful situation like a dog. If you can't eat it or play with it, Pee on it and walk away. 1996 Dodge Intreped ES Nice car great on gas 1993 Jeep Cherokee. Looking for a swb chevy 73-87

10-20-2010, 04:22 PM	#48
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: New to me Blazer hazard flasher is located on convience center behind center of instrument panel (cluster) TS flasher, behind knee bolster, near cigarette lighter

10-22-2010, 06:42 PM	#49
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: New to me Blazer Thanks fellas. I really appreciate the help and I'll be by soon to get that bolt Posted via Mobile Device

10-28-2010, 10:06 PM	#50
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: New to me Blazer take a pic of the plug your missing, Im sure I can tell you where it goes. I cant picture what one your talking about. you need me to come get this thing running for you? lol __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

Register or Log In To remove these advertisements.