Cheyenne Super glove box door placard/overlay - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Rich72C10** · 02-19-2022, 08:09 PM

Quote:

Originally Posted by Hart_Rod

I ended up using 3M 2 sided tape and it worked great. Can anyone give me the dimensions/position to mount the actual emblem? Thanks!

Hi Hart_Rod

Might you recall the 3M sided tape you used? Was it actually their mounting tape? It seems kind of thick but I suppose photos on Amazon can be misleading.

I actually have some 3M double-coat 665 tape - which is thin but I don't think it would be strong enough.

**Rich72C10** · 02-19-2022, 09:34 PM

well, i got some 3M Super Strength Molding Tape, 03614, 1/2 in x 15 ft from O'Riley's. I had a $5 reward and figured give it a go.

The stuff worked great and its a little squishy, so I think the aluminum overlay went on very well.

02-19-2022, 09:34 PM	#27
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: Cheyenne Super glove box door placard/overlay well, i got some 3M Super Strength Molding Tape, 03614, 1/2 in x 15 ft from O'Riley's. I had a $5 reward and figured give it a go. The stuff worked great and its a little squishy, so I think the aluminum overlay went on very well. Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.