Cheyenne Super glove box door placard/overlay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 01-07-2018, 12:03 PM

What's the best way to attach the aluminum Cheyenne overlay onto my glove box door? Liquid nails? 2 sided 3M tape? Tips or suggestion would be great. TIA.

**lolife99** · 01-07-2018, 12:28 PM

3m 77 spray adhesive works good.
It’s basically sprayable contact cement.
Spray both pieces and let them dry.
Then stick it..
But you better have it where you want, because it will be stuck!
Tape off the glovebox door where you don’t want glue.

Lots of good videos on using this stuff.

1968aj · 01-07-2018, 01:02 PM

is that aftermarket woodgrain? if it is where did you get it?THANKS

**HO455** · 01-07-2018, 06:33 PM

Any contact cement will work. Use some piano wire or old hangers to hold the inlay just above the door after the glue is ready. Then you can get it aligned with out sticking. Then starting at one edge lineup and remove the wires one by one working across. Don't press down as you go in case your not happy with the alignment before the last wire is removed. When your satisfied pull the last one and use a roller to push air bubbles out from the center to the edges. The spray cement is easier to get a consistent glue application but far messier due to over spray. If you haven't used it before and want to that way do some practicing with the spraying.

Orange67 · 01-07-2018, 06:42 PM

I used 3M emblem tape for my 67's Chevrolet emblem, it has held for 6 or 7 years now. I cleaned both really well before I did it. The bonus of the tape is if I ever need to remove it I have a better chance of getting it off in one piece. Good luck!

**Hart_Rod** · 01-08-2018, 04:00 PM

Quote:

Originally Posted by lolife99

3m 77 spray adhesive works good.
It’s basically sprayable contact cement.
Spray both pieces and let them dry.
Then stick it..
But you better have it where you want, because it will be stuck!
Tape off the glovebox door where you don’t want glue.

Lots of good videos on using this stuff.

Thanks for the info!

Quote:

Originally Posted by 1968aj

is that aftermarket woodgrain? if it is where did you get it?THANKS

I got the placard from a board member SuperCheyenne Man. He also redid my door panels and gauge bezel.

Quote:

Originally Posted by HO455

Any contact cement will work. Use some piano wire or old hangers to hold the inlay just above the door after the glue is ready. Then you can get it aligned with out sticking. Then starting at one edge lineup and remove the wires one by one working across. Don't press down as you go in case your not happy with the alignment before the last wire is removed. When your satisfied pull the last one and use a roller to push air bubbles out from the center to the edges. The spray cement is easier to get a consistent glue application but far messier due to over spray. If you haven't used it before and want to that way do some practicing with the spraying.

Good info!

Quote:

Originally Posted by Orange67

I used 3M emblem tape for my 67's Chevrolet emblem, it has held for 6 or 7 years now. I cleaned both really well before I did it. The bonus of the tape is if I ever need to remove it I have a better chance of getting it off in one piece. Good luck!

Thanks!

**Hart_Rod** · 01-17-2018, 03:17 PM

I ended up using 3M 2 sided tape and it worked great. Can anyone give me the dimensions/position to mount the actual emblem? Thanks!

**Hart_Rod** · 01-19-2018, 09:44 PM

bump

**HO455** · 01-19-2018, 10:00 PM

Nobody is able to help you with that, as no one else has that emblem.

I guess you will just have to send it my way.

**Hart_Rod** · 01-19-2018, 10:21 PM

Quote:

Originally Posted by HO455

Nobody is able to help you with that, as no one else has that emblem.

I guess you will just have to send it my way.

Orange67 · 01-19-2018, 10:31 PM

Rob, I'm not sure if I love you, the 'burb, or both! That emblem is *****IN!!! I am completely stunned! I love it!

notsolo · 01-20-2018, 09:01 AM

Just the 1 emblem, that can't be right. Billet SUPER-BURB side emblems? Billet Tailgate emblem? Hood ornament?...FYI when you type in Superburb in google search it auto corrects to..... SUPERB......Nice Bonus...Well Done....

**71blksuper4x4** · 01-20-2018, 11:04 AM

Quote:

Originally Posted by notsolo

Just the 1 emblem, that can't be right. Billet SUPER-BURB side emblems? Billet Tailgate emblem? Hood ornament?...FYI when you type in Superburb in google search it auto corrects to..... SUPERB......Nice Bonus...Well Done....

Have you seen his tailgate yet? Pretty sweet, good work Rob. If you need a measurement, I can probably help out. Trevor

**uncle** · 01-20-2018, 11:32 AM

I hooked tape measure on edge of aluminum.

**uncle** · 01-20-2018, 11:32 AM

222222

**uncle** · 01-20-2018, 11:33 AM

3333333

**uncle** · 01-20-2018, 11:34 AM

4444

**Hart_Rod** · 01-20-2018, 11:55 AM

Quote:

Originally Posted by Orange67

Rob, I'm not sure if I love you, the 'burb, or both! That emblem is *****IN!!! I am completely stunned! I love it!

Glad you like it!

Quote:

Originally Posted by notsolo

Just the 1 emblem, that can't be right. Billet SUPER-BURB side emblems? Billet Tailgate emblem? Hood ornament?...FYI when you type in Superburb in google search it auto corrects to..... SUPERB......Nice Bonus...Well Done....

Thanks!

Quote:

Originally Posted by 71blksuper4x4

Have you seen his tailgate yet? Pretty sweet, good work Rob. If you need a measurement, I can probably help out. Trevor

Thanks Trevor!

Quote:

Originally Posted by uncle

I hooked tape measure on edge of aluminum.

Thank you Tim!!! Will post pictures once installed.

**lolife99** · 01-20-2018, 12:56 PM

I’d say place it where you want.
If you search “Cheyenne super glove box doors”,... you’ll find they were placed in many different locations in the lower right hand corner.
I doubt there is an “exact” location.

**HO455** · 01-20-2018, 04:47 PM

Well since Uncle Tim let the cat out and now there's no chance of the emblem showing up in my mailbox.

I think lowlife99 is right with the different factories and having to stick them on 30-50 times a day per shift as long as they weren't crooked, no one probably cared how exact they got installed.

**Hart_Rod** · 03-21-2018, 06:57 AM

Thanks for all of the input

, sorry I forgot to post a picture,

.

**lolife99** · 03-21-2018, 07:34 AM

Looks perfect!

When is the side trim going on your burb?

**Hart_Rod** · 03-21-2018, 07:47 AM

Quote:

Originally Posted by lolife99

Looks perfect!

When is the side trim going on your burb?

Thanks! UUUuuuhhmmm, working on it.....one thing at a time....

.

**rharris** · 02-05-2019, 11:42 PM

Quote:

Originally Posted by Hart_Rod

I ended up using 3M 2 sided tape and it worked great. Can anyone give me the dimensions/position to mount the actual emblem? Thanks!

Do you remember what size/thickness of 3M tape you used?

**Hart_Rod** · 02-06-2019, 11:54 AM

I think it was 1/8".

01-07-2018, 12:03 PM	#1
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Cheyenne Super glove box door placard/overlay What's the best way to attach the aluminum Cheyenne overlay onto my glove box door? Liquid nails? 2 sided 3M tape? Tips or suggestion would be great. TIA. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-07-2018, 12:28 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Cheyenne Super glove box door placard/overlay 3m 77 spray adhesive works good. It’s basically sprayable contact cement. Spray both pieces and let them dry. Then stick it.. But you better have it where you want, because it will be stuck! Tape off the glovebox door where you don’t want glue. Lots of good videos on using this stuff. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-07-2018, 01:02 PM	#3
1968aj Registered User Join Date: Apr 2009 Location: houston texas Posts: 1,438	Re: Cheyenne Super glove box door placard/overlay is that aftermarket woodgrain? if it is where did you get it?THANKS

01-07-2018, 06:33 PM	#4
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,783	Re: Cheyenne Super glove box door placard/overlay Any contact cement will work. Use some piano wire or old hangers to hold the inlay just above the door after the glue is ready. Then you can get it aligned with out sticking. Then starting at one edge lineup and remove the wires one by one working across. Don't press down as you go in case your not happy with the alignment before the last wire is removed. When your satisfied pull the last one and use a roller to push air bubbles out from the center to the edges. The spray cement is easier to get a consistent glue application but far messier due to over spray. If you haven't used it before and want to that way do some practicing with the spraying. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-07-2018, 06:42 PM	#5
Orange67 Registered User Join Date: Mar 2013 Location: Syracuse, Utah Posts: 499	Re: Cheyenne Super glove box door placard/overlay I used 3M emblem tape for my 67's Chevrolet emblem, it has held for 6 or 7 years now. I cleaned both really well before I did it. The bonus of the tape is if I ever need to remove it I have a better chance of getting it off in one piece. Good luck! __________________ Justin '67 C20 CST Custom Camper '04.5 LLY Duramax CCSB...sold

01-17-2018, 03:17 PM	#7
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Cheyenne Super glove box door placard/overlay I ended up using 3M 2 sided tape and it worked great. Can anyone give me the dimensions/position to mount the actual emblem? Thanks! Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 01-17-2018 at 03:29 PM.

01-19-2018, 09:44 PM	#8
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Cheyenne Super glove box door placard/overlay bump __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-19-2018, 10:00 PM	#9
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,783	Re: Cheyenne Super glove box door placard/overlay Nobody is able to help you with that, as no one else has that emblem. I guess you will just have to send it my way. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-19-2018, 10:31 PM	#11
Orange67 Registered User Join Date: Mar 2013 Location: Syracuse, Utah Posts: 499	Re: Cheyenne Super glove box door placard/overlay Rob, I'm not sure if I love you, the 'burb, or both! That emblem is *****IN!!! I am completely stunned! I love it! __________________ Justin '67 C20 CST Custom Camper '04.5 LLY Duramax CCSB...sold

01-20-2018, 09:01 AM	#12
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,451	Re: Cheyenne Super glove box door placard/overlay Just the 1 emblem, that can't be right. Billet SUPER-BURB side emblems? Billet Tailgate emblem? Hood ornament?...FYI when you type in Superburb in google search it auto corrects to..... SUPERB......Nice Bonus...Well Done.... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=635605

01-20-2018, 11:32 AM	#14
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,283	Re: Cheyenne Super glove box door placard/overlay I hooked tape measure on edge of aluminum. Attached Images

01-20-2018, 11:33 AM	#16
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,283	Re: Cheyenne Super glove box door placard/overlay 3333333 Attached Images

01-20-2018, 11:34 AM	#17
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,283	Re: Cheyenne Super glove box door placard/overlay 4444 Attached Images

01-20-2018, 12:56 PM	#19
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Cheyenne Super glove box door placard/overlay I’d say place it where you want. If you search “Cheyenne super glove box doors”,... you’ll find they were placed in many different locations in the lower right hand corner. I doubt there is an “exact” location. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-20-2018, 04:47 PM	#20
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,783	Re: Cheyenne Super glove box door placard/overlay Well since Uncle Tim let the cat out and now there's no chance of the emblem showing up in my mailbox. I think lowlife99 is right with the different factories and having to stick them on 30-50 times a day per shift as long as they weren't crooked, no one probably cared how exact they got installed. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377



Register or Log In To remove these advertisements.

03-21-2018, 06:57 AM	#21
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Cheyenne Super glove box door placard/overlay Thanks for all of the input , sorry I forgot to post a picture, . Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-21-2018, 07:34 AM	#22
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Cheyenne Super glove box door placard/overlay Looks perfect! When is the side trim going on your burb? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-06-2019, 11:54 AM	#25
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Cheyenne Super glove box door placard/overlay I think it was 1/8". __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.