Resin Models - found someone making our trucks - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 01-09-2009, 10:07 PM

I can handle the no wheels and steering wheel parts, have plenty of those in my parts bin, but it sucks I have to buy another $12-15 kit for just the glass

It appears to come with everything else needed?

msgross · 01-10-2009, 12:00 AM

He threw in the engine parts (radiator, brake booster, headers, manifold etc..) and it has both bumpers, tailgate, grille, seats, dash, bed and cab...

so basically everything except the tires, axles, glass and steering wheel are there. Not bad for $35...

I did find a website with just the short bed for $22 but it doesn't have trim...

msgross · 02-14-2009, 01:10 PM

he sent me a non-cowl hood last week..

good guy, just be specific in what you want when you order

Mayo · 04-14-2009, 01:36 PM

I might have to get one of those.

Mayo · 04-14-2009, 05:57 PM

So if I wanted to make a dually, I could just get any model truck that is a dually and steal the wheels off of it and use it for one of these resin bodies?

msgross · 04-14-2009, 06:03 PM

up to your imagination... I have a 68 dually wrecker

Mayo · 04-14-2009, 06:09 PM

So is that a yes? I haven't built a model in years and would like to again. I was thinking it would be awesome to get one of those crewcab bodies and then get a stepside model and glue the fenders on to the bed and turn a fleetside into a Chevy or GMC crewcab dually.

ratpackv8sonly · 04-17-2009, 07:26 PM

Yeah you could and it really easy if you have the time to mess with it. For gluing resin though its best to use a two part epoxy or super glue.

I actually sell alot of resin parts for our trucks including a corrected shortbed frame, dually rims, all 6 years of the grills and corrected interiors that have the seats removed and made a bench seat. Just havnt posted in this new section as I havnt renewed my subscription.

msgross · 04-17-2009, 08:05 PM

ratpackv8sonly

please don't turn this into a sale thread unless you are a vendor.. thanks..

ratpackv8sonly · 04-18-2009, 01:09 AM

I did say I have not posted anything in this section for sale as I have not renewed my membership in that post and I did not offer anything for sale either cause of it. But as soon as I do renew I will be asking some of you mods as to where I can have it listed so it doesnt get lost in the forum if thats ok?

msgross · 04-18-2009, 08:57 AM

Quote:

Originally Posted by ratpackv8sonly

I did say I have not posted anything in this section for sale as I have not renewed my membership in that post and I did not offer anything for sale either cause of it. But as soon as I do renew I will be asking some of you mods as to where I can have it listed so it doesnt get lost in the forum if thats ok?

no problem.. these types of sales would more than likrly be a vendor subscription...

**special-K** · 04-21-2009, 07:50 AM

Ratpack,I think you`d be fine selling as a subscriber.I doubt many sales will result.If it actually turned into a real money-maker we`d expect you to be a Vendor.I`m sure this isn`t a business.You just got deeper into the hobby than most.Like me having a ton of truck parts to sell as a result of being a hobbiest to the 5th degree.We have members who are in the parts business who only sell occassional parts that aren`t paying vendor fees.
It`s cool to know we have a member that does this.and,you make more correct parts than any I`ve seen.

Remo · 11-29-2011, 01:05 AM

this appears to be an old thread, but is this short bed kit still available to anyones knowledge?

Tex_50613 · 11-29-2011, 07:14 PM

Quote:

Originally Posted by Remo

this appears to be an old thread, but is this short bed kit still available to anyones knowledge?

there's a link on the first page, you could e-mail him to find out, I just did to find out about some specific kits or what not he has on there

01-09-2009, 10:07 PM	#26
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Resin Models - found someone making our trucks I can handle the no wheels and steering wheel parts, have plenty of those in my parts bin, but it sucks I have to buy another $12-15 kit for just the glass It appears to come with everything else needed? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 01-09-2009 at 10:08 PM.

01-10-2009, 12:00 AM	#27
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Resin Models - found someone making our trucks He threw in the engine parts (radiator, brake booster, headers, manifold etc..) and it has both bumpers, tailgate, grille, seats, dash, bed and cab... so basically everything except the tires, axles, glass and steering wheel are there. Not bad for $35... I did find a website with just the short bed for $22 but it doesn't have trim... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 01-10-2009 at 12:00 AM.

02-14-2009, 01:10 PM	#28
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Resin Models - found someone making our trucks he sent me a non-cowl hood last week.. good guy, just be specific in what you want when you order __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-14-2009, 01:36 PM	#29
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: Resin Models - found someone making our trucks I might have to get one of those. __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

04-14-2009, 05:57 PM	#30
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: Resin Models - found someone making our trucks So if I wanted to make a dually, I could just get any model truck that is a dually and steal the wheels off of it and use it for one of these resin bodies? __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

04-14-2009, 06:03 PM	#31
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Resin Models - found someone making our trucks up to your imagination... I have a 68 dually wrecker __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-14-2009, 06:09 PM	#32
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: Resin Models - found someone making our trucks So is that a yes? I haven't built a model in years and would like to again. I was thinking it would be awesome to get one of those crewcab bodies and then get a stepside model and glue the fenders on to the bed and turn a fleetside into a Chevy or GMC crewcab dually. __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

04-17-2009, 07:26 PM	#33
ratpackv8sonly Registered User Join Date: Mar 2008 Location: Las Cruces New Mexico Posts: 214	Re: Resin Models - found someone making our trucks Yeah you could and it really easy if you have the time to mess with it. For gluing resin though its best to use a two part epoxy or super glue. I actually sell alot of resin parts for our trucks including a corrected shortbed frame, dually rims, all 6 years of the grills and corrected interiors that have the seats removed and made a bench seat. Just havnt posted in this new section as I havnt renewed my subscription.

04-17-2009, 08:05 PM	#34
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Resin Models - found someone making our trucks ratpackv8sonly please don't turn this into a sale thread unless you are a vendor.. thanks.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-18-2009, 01:09 AM	#35
ratpackv8sonly Registered User Join Date: Mar 2008 Location: Las Cruces New Mexico Posts: 214	Re: Resin Models - found someone making our trucks I did say I have not posted anything in this section for sale as I have not renewed my membership in that post and I did not offer anything for sale either cause of it. But as soon as I do renew I will be asking some of you mods as to where I can have it listed so it doesnt get lost in the forum if thats ok?

04-21-2009, 07:50 AM	#37
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Resin Models - found someone making our trucks Ratpack,I think you`d be fine selling as a subscriber.I doubt many sales will result.If it actually turned into a real money-maker we`d expect you to be a Vendor.I`m sure this isn`t a business.You just got deeper into the hobby than most.Like me having a ton of truck parts to sell as a result of being a hobbiest to the 5th degree.We have members who are in the parts business who only sell occassional parts that aren`t paying vendor fees. It`s cool to know we have a member that does this.and,you make more correct parts than any I`ve seen. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-29-2011, 01:05 AM	#38
Remo Registered User Join Date: Nov 2011 Location: Southern, Michigan Posts: 1	Re: Resin Models - found someone making our trucks this appears to be an old thread, but is this short bed kit still available to anyones knowledge?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.