MI WTB correct rag joint - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pimpston65** · 02-11-2019, 05:13 PM

If some one could please help me find the correct rag joint for a 66 K10 manual gearbox. Mine doesn’t have a flat spot in the splined section, if more dimensions are need for this item please respond, thank you.

BLK65K10 · 02-11-2019, 11:39 PM

I will round one up and send it. Thanks Lyle

**aerotruk63** · 02-14-2019, 06:31 AM

That's interesting , parts book lists two different part numbers for 63-66.5689757 coupling and lower flange. 5682485 Intermediate shaft flange same as for 60-62 but EXC 4WD. Does the one you have got any casting numbers on it?

**aerotruk63** · 02-14-2019, 06:35 AM

Quick internet search Chevrolet passenger car has the same 5689757 part number as well as Buick's.

**pimpston65** · 02-14-2019, 08:48 AM

Quote:

Originally Posted by aerotruk63

That's interesting , parts book lists two different part numbers for 63-66.5689757 coupling and lower flange. 5682485 Intermediate shaft flange same as for 60-62 but EXC 4WD. Does the one you have got any casting numbers on it?

i will check for the casting numbers. my 65 2wheel drive has one with a flat spot on it, but its a newer steering box 67 i think. while my 66 burb 4x4 doesnt have a flat spot its all splines, and the 65's is too small diameter to fit on the 4x4.

**aerotruk63** · 02-14-2019, 02:41 PM

From my reading there's a 3/4" shaft and a 13/16" shaft versions.

**60-66** · 02-16-2019, 01:06 PM

I have a 5689757 rag joint NOS . C10 is same as K10

**pimpston65** · 02-16-2019, 01:37 PM

Quote:

Originally Posted by 60-66

I have a 5689757 rag joint NOS . C10 is same as K10

whats the cost?

**aerotruk63** · 02-16-2019, 08:05 PM

Quote:

Originally Posted by pimpston65

whats the cost?

3/4 ton NOS HUB LOK.

franken · 02-16-2019, 10:03 PM

Not sure if it helps, but...
https://www.google.com/search?q=66+K...w=1171&bih=653

**pimpston65** · 02-16-2019, 11:42 PM

Quote:

Originally Posted by aerotruk63

3/4 ton NOS HUB LOK.

ur killing me, but i look for a set.

**pimpston65** · 02-16-2019, 11:42 PM

Quote:

Originally Posted by franken

Not sure if it helps, but...
https://www.google.com/search?q=66+K...w=1171&bih=653

thanks

**pimpston65** · 02-17-2019, 08:57 AM

Quote:

Originally Posted by aerotruk63

3/4 ton NOS HUB LOK.

there was a 3/4ton burb at a bone yard ive been going to for a couple of yrs and it had the hubs, but it wasnt there last week. not sure why or where it was moved to. i will look more around the same lot to find it.

**60-66** · 02-17-2019, 11:08 AM

Sending PM

**pimpston65** · 02-17-2019, 12:23 PM

i’ll take it. Pm sent

02-11-2019, 05:13 PM	#1
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	WTB correct rag joint If some one could please help me find the correct rag joint for a 66 K10 manual gearbox. Mine doesn’t have a flat spot in the splined section, if more dimensions are need for this item please respond, thank you.

02-11-2019, 11:39 PM	#2
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: WTB correct rag joint I will round one up and send it. Thanks Lyle

02-14-2019, 06:31 AM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB correct rag joint That's interesting , parts book lists two different part numbers for 63-66.5689757 coupling and lower flange. 5682485 Intermediate shaft flange same as for 60-62 but EXC 4WD. Does the one you have got any casting numbers on it? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-14-2019, 06:35 AM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB correct rag joint Quick internet search Chevrolet passenger car has the same 5689757 part number as well as Buick's. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-14-2019, 02:41 PM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB correct rag joint From my reading there's a 3/4" shaft and a 13/16" shaft versions. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-16-2019, 01:06 PM	#7
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,322	Re: WTB correct rag joint I have a 5689757 rag joint NOS . C10 is same as K10 __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

02-16-2019, 10:03 PM	#10
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,052	Re: WTB correct rag joint Not sure if it helps, but... https://www.google.com/search?q=66+K...w=1171&bih=653

02-17-2019, 11:08 AM	#14
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,322	Re: WTB correct rag joint Sending PM __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

02-17-2019, 12:23 PM	#15
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: WTB correct rag joint i’ll take it. Pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.