The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-16-2019, 01:15 PM   #1
Coley
Registered User
 
Coley's Avatar
 
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
Smile A potentially expensive mishap.....

Well...'we' had a bit of a mishap due to all the snowy weather we've had.

We...and when I see we I mean my wife (lol)...was backing out of the driveway in my truck and broke the drivers side mirror.
She is a pretty great wife and a good driver but the amount of snow we had on the driveway got her off course as she was backing up and she clipped a tree branch.....sigh. She felt really bad about this and has offered to fully pay for it...but no need to do so from my part, we'll figure it out.

So the good news?...it wasn't the '72 which is in storage. It was my 2005 Silverado Duramax...although I'm still not sure if that's good news.

The bad news is that it has probably the most expensive mirror option on it which were the telescoping, tow, power, heated, signal mirror option.

So long story short I called GM parts to see what the replacement cost was.....$946.50 + tax (not including installation)....for a single drivers side mirror.....WTH?
(note:...those funds are in Canadian...so that is, what...about $60 USD? )

.....so if anyone has a good equivalent mirror laying around let me know...otherwise my morning will be spent largely calling the local auto/truck wreckers, lol.

All good
Coley
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL
1966 Chevy 1/2 ton (Florida- Red/white)
1972 Chevy 1/2 ton (California- Blue/white)
2005 Chevy Silverado HD2500/Duramax
2000 Dodge Ram 1500
Coley is offline   Reply With Quote
Old 02-16-2019, 01:35 PM   #2
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,767
Re: A potentially expensive mishap.....

Yikes the newer stuff is getting up there with the NOS prices guys are asking for the 67-72 stuff haha!

And the snow sucked. I imagine you and I got a similar amount. I posted some pics on your snow thread. Glad its starting to go away. Got some rain yesterday.
CG is offline   Reply With Quote
Old 02-16-2019, 01:41 PM   #3
Coley
Registered User
 
Coley's Avatar
 
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
Re: A potentially expensive mishap.....

...yeah its interesting once you have to wade into the pool of new cars parts and servicing and the costs associated with it to get a serious dose of reality.

Then it kind of makes you laugh about the issue on having to spend $400 on a tach dash or a speed minder or $500 getting a rear differential set up and thinking that is expensive, lol.

....even makes a set of factory tow hooks look cheap

C.
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL
1966 Chevy 1/2 ton (Florida- Red/white)
1972 Chevy 1/2 ton (California- Blue/white)
2005 Chevy Silverado HD2500/Duramax
2000 Dodge Ram 1500
Coley is offline   Reply With Quote
Old 02-16-2019, 01:45 PM   #4
michael bustamante
Senior Member
 
michael bustamante's Avatar
 
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,814
Re: A potentially expensive mishap.....

If I remember correctly the fully loaded extension mirror is about 200 thru lkq and national auto. If you get the CAPA part it should be a lifetime warranty also
__________________
1967custom
michael bustamante is offline   Reply With Quote
Old 02-16-2019, 02:13 PM   #5
Coley
Registered User
 
Coley's Avatar
 
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
Re: A potentially expensive mishap.....

One thing about it is that it is the low profile 'accordion' style housing vs. the bigger 2 arm swing style, which I've seen a lot of.
So it has a flexible bellows between the main frame mount and the mirror head.

I called a wrecker this morning...and the guy just laughed and wished me luck, lol.

Maybe I'll have to put a simpler non telescoping power mirror on it for the time being and keep an eye out for the telescoping one?...

C.
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL
1966 Chevy 1/2 ton (Florida- Red/white)
1972 Chevy 1/2 ton (California- Blue/white)
2005 Chevy Silverado HD2500/Duramax
2000 Dodge Ram 1500
Coley is offline   Reply With Quote
Old 02-16-2019, 02:28 PM   #6
weq92f
Registered User
 
Join Date: Oct 2016
Location: Dallas Texas
Posts: 2,860
Re: A potentially expensive mishap.....

Is this your mirror?

https://www.partsgeek.com/gbproducts...ad=47433966132

It's a Dorman replacement for Chevy 2500 HD

And it's about half the price for the GM unit.

EDIT: forget the price comment, does not apply lol

-klb
__________________
67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi
07 335 sport turbo 6sp
94 Trans Am GT LT1 6sp posi -- sold after 22yrs
99 540 sport V8 6sp -- sold
73 240z L24 4sp -- given to friend
68 C10 step 350/350 3.73 open -- sold
weq92f is offline   Reply With Quote
Old 02-16-2019, 03:35 PM   #7
Coley
Registered User
 
Coley's Avatar
 
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
Smile Re: A potentially expensive mishap.....

Quote:
Originally Posted by weq92f View Post
Is this your mirror?

https://www.partsgeek.com/gbproducts...ad=47433966132

It's a Dorman replacement for Chevy 2500 HD

And it's about half the price for the GM unit.

EDIT: forget the price comment, does not apply lol

-klb
Yep...that's the one.

Here is one that I found on Ebay...$260+ (USD)

https://www.ebay.ca/itm/2003-2007-CH...FcU1l-&vxp=mtr


Hmmm...thinkin'...thinkin'.

Coley
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL
1966 Chevy 1/2 ton (Florida- Red/white)
1972 Chevy 1/2 ton (California- Blue/white)
2005 Chevy Silverado HD2500/Duramax
2000 Dodge Ram 1500
Coley is offline   Reply With Quote
Old 02-16-2019, 04:05 PM   #8
Redneck Rydes
Registered User
 
Redneck Rydes's Avatar
 
Join Date: Feb 2016
Location: Trenton,Ontario & South Carolina
Posts: 755
Re: A potentially expensive mishap.....

I had those same mirrors on my 2005 3500, totally clapped out, replaced them with the tall trailer extending mirrors, non power, alot cheaper than replacing 1 mirror,just a thoughr
Redneck Rydes is offline   Reply With Quote
Old 02-16-2019, 04:16 PM   #9
garyd1961
Registered User
 
Join Date: May 2016
Location: Henderson NC
Posts: 975
Re: A potentially expensive mishap.....

Quote:
Originally Posted by Coley View Post
Yep...that's the one.

Here is one that I found on Ebay...$260+ (USD)

https://www.ebay.ca/itm/2003-2007-CH...FcU1l-&vxp=mtr


Hmmm...thinkin'...thinkin'.

Coley
I wouldn't think too long. Looks like the best deal you will find and I'm sure someone else out there is looking for one also.
garyd1961 is offline   Reply With Quote
Old 02-16-2019, 04:46 PM   #10
Coley
Registered User
 
Coley's Avatar
 
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
Re: A potentially expensive mishap.....

Yeah, I'm thinking on it.....

I also found a set of 2 (although I only need one) for $245 on Ebay...not bad, if I could sell the other for $150 or something to make back a bit of the cost.

https://www.ebay.ca/itm/254118731448

That said, my wife called our auto insurer on this and they said we could get it done under insurance for a $300 deductible, which is a good deal.
However, I would want to make sure it didn't have any impact on my insurance record in upping my rates, etc.

I removed the broken mirror unit this morning...that is one complicated internal mechanism. Looks like something you find in aircraft landing gear....lol
noting that I was considering just re-engineering it and having the parts made locally at one of the shops I use...but that is now pretty unlikely given the complexity of the broken connection.

.....there's going to be more to this saga, lol.

Coley
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL
1966 Chevy 1/2 ton (Florida- Red/white)
1972 Chevy 1/2 ton (California- Blue/white)
2005 Chevy Silverado HD2500/Duramax
2000 Dodge Ram 1500
Coley is offline   Reply With Quote
Old 02-16-2019, 05:12 PM   #11
Classic Bowties
Always on the hunt...
 
Join Date: Sep 2006
Location: Portland, OR.
Posts: 5,538
Re: A potentially expensive mishap.....

Quote:
Originally Posted by Coley View Post
.....so if anyone has a good equivalent mirror laying around let me know...otherwise my morning will be spent largely calling the local auto/truck wreckers, lol.

All good
Coley
Went through the same thing except for the wife part, I was behind the wheel backing my trailer into a tight location picking up a truck and while paying closer attention to the trailer and the property owners nice brick walled drive way, I ended up swinging my RH/pass side mirror into the guys mailbox breaking the mirror and housing. I then made the same dealership call and got the same $900.-something replacement cost for the single RH mirror, I then tried the local newer vehicle salvage yards getting used replacement prices in the $3-400. range per mirror. While checking on new aftermarket replacement options, I ended up buying an oe used set off a local truck accessories place that happened to be customizing a 2005 3500HD D-max dually, catch was that I had to buy the pair so I ended up with a good used LH/RH set for $400. (well under half the cost of a new single). I installed the RH mirror and shelved the LH, figuring I would be prepared in case of any future mishaps with the drivers side. I would sell this LH single for $200. plus shipping cost, do you have a lower 48 shipping address? Mirror does have the turn signal option, the stick on added convex/blind spot mirror is partially covering it. Fedex ground shipment would probably be the cheapest option. Let me know, Mel
Attached Images
     
Classic Bowties is online now   Reply With Quote
Old 02-16-2019, 05:31 PM   #12
bill3rail
Registered User
 
bill3rail's Avatar
 
Join Date: Jul 2013
Location: LI, NY 11801
Posts: 1,140
Re: A potentially expensive mishap.....

car-part.com
__________________
1970 C10 8' Fleetside, L6 250, 3 on the Tree.
The most basic of pickup trucks!
bill3rail is offline   Reply With Quote
Old 02-16-2019, 05:50 PM   #13
HO455
Post Whore
 
HO455's Avatar
 
Join Date: Feb 2016
Location: Portland Oregon
Posts: 10,783
Re: A potentially expensive mishap.....

Kinda on topic. We were just discussing how much it would cost to replace that fancy tailgate on the new Chevrolet's (with the fold out step) when it gets bent.
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help.
RIP Bob Parks.
1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo
If it breaks I didn't want it in the first place
The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377
HO455 is offline   Reply With Quote
Old 02-16-2019, 06:13 PM   #14
Smitty
Senior Member
 
Smitty's Avatar
 
Join Date: Dec 1999
Location: Spring Valley, Ca.
Posts: 1,100
Re: A potentially expensive mishap.....

Try Rockauto.com!
__________________
Smitty
'71 Short Fleetside
Spring Valley, Ca.
Smitty is offline   Reply With Quote
Old 02-16-2019, 06:30 PM   #15
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,140
Re: A potentially expensive mishap.....

I have a set of those that I will be putting on eBay tomorrow.

Only problem is the power extend doesn’t work (I’m told. I never used them).

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 02-16-2019, 08:52 PM   #16
LockDoc
The Older Generation

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,312
Re: A potentially expensive mishap.....

-
Try your local body shops. That is where I got mine. $125.00 for the same mirror as yours.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 02-16-2019, 09:10 PM   #17
Barnfind46
Registered User
 
Barnfind46's Avatar
 
Join Date: Aug 2014
Location: Mena,Arkansas
Posts: 485
Re: A potentially expensive mishap.....

Part prices are always high on newer cars and trucks.They don't start to come down until the truck is about 6 years old. The wrecking yards will usually price parts about 50% to 60% what the new parts cost and mirrors are always expensive because they are easily broken and a big seller. Parts and service is how the dealerships make their money. Most mirrors are not that hard to install. You just gotta find all the hidden fasteners and be careful with those dang wiring plugs.
__________________
68' with no bells or whistles unless I add'em.
Barnfind46 is offline   Reply With Quote
Old 02-16-2019, 10:26 PM   #18
406flyfish
Registered User
 
Join Date: Jul 2017
Location: Montana
Posts: 29
Re: A potentially expensive mishap.....

Try gmpartsdirect.com it’s about 40% off retail and gm factory parts. Also it’s the same as employee discount for most. I have also tried aftermarket mirrors and mine shake a little at highway speeds. I wish I would have paid more and gotten gm mirrors
406flyfish is offline   Reply With Quote
Old 02-16-2019, 11:04 PM   #19
custom10nut
Registered User
 
custom10nut's Avatar
 
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,846
Re: A potentially expensive mishap.....

I’m sure, with the age of your truck, you can get aftermarket mirrors with all the options, fora WHOLE lot cheaper than $900+
custom10nut is offline   Reply With Quote
Old 02-16-2019, 11:21 PM   #20
Pro299
Junior Member
 
Join Date: Jul 2014
Location: Huntsville, AL
Posts: 75
Re: A potentially expensive mishap.....

Quote:
Originally Posted by Coley View Post
Yeah, I'm thinking on it.....

I also found a set of 2 (although I only need one) for $245 on Ebay...not bad, if I could sell the other for $150 or something to make back a bit of the cost.

https://www.ebay.ca/itm/254118731448

That said, my wife called our auto insurer on this and they said we could get it done under insurance for a $300 deductible, which is a good deal.
However, I would want to make sure it didn't have any impact on my insurance record in upping my rates, etc.

I removed the broken mirror unit this morning...that is one complicated internal mechanism. Looks like something you find in aircraft landing gear....lol
noting that I was considering just re-engineering it and having the parts made locally at one of the shops I use...but that is now pretty unlikely given the complexity of the broken connection.

.....there's going to be more to this saga, lol.

Coley
As another data point, the GM originals are actually quite robust. I also have an 05 Duramax with the same mirrors. A couple of years ago I was towing with them extended a little bit and met an oncoming county utility truck. He came over in my lane just enough to clip mirrors as he passed. Mine folded back and I had no damage except for my heart rate. His broke the housing even though it folded as well (it was an F450.)
Pro299 is offline   Reply With Quote
Old 02-16-2019, 11:45 PM   #21
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,076
Re: A potentially expensive mishap.....

The more I see this kind of thing, the more I just want to rent a truck to take home the stuff my truck won't haul. Then again, I have attorneys on call, so maybe I don't have that much to worry about. Bad situation for you, in any event.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 02-17-2019, 03:19 AM   #22
vics stuff
Registered User
 
Join Date: May 2011
Location: Reno Nevada
Posts: 377
Re: A potentially expensive mishap.....

I had a damaged mirror on my Freightliner . Called the dealership and a replacement was $1,700.00 USD. Checked around the wrecking yards and found one for $150.00 USD.
Vic
vics stuff is offline   Reply With Quote
Old 02-17-2019, 10:14 AM   #23
95 S_Trucker
Registered User
 
95 S_Trucker's Avatar
 
Join Date: Oct 2009
Location: .
Posts: 2,178
Re: A potentially expensive mishap.....

I bought one of those mirrors from lqk last year. It was 260. I had to install a new slide motor in it. That was 60.

The slide motors are common. They make noise but won’t slide the mirror out. There are plastic gears inside that strip.
95 S_Trucker is offline   Reply With Quote
Old 02-17-2019, 12:09 PM   #24
Redneck Rydes
Registered User
 
Redneck Rydes's Avatar
 
Join Date: Feb 2016
Location: Trenton,Ontario & South Carolina
Posts: 755
Re: A potentially expensive mishap.....

Thats what happened to mine, like I said,save the greif and put on the vertical extending camper/ towing mirrors,no power, less than 150.00 a pair.
Redneck Rydes is offline   Reply With Quote
Old 02-17-2019, 05:45 PM   #25
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,140
Re: A potentially expensive mishap.....

Quote:
Originally Posted by 95 S_Trucker View Post
I bought one of those mirrors from lqk last year. It was 260. I had to install a new slide motor in it. That was 60.

The slide motors are common. They make noise but won’t slide the mirror out. There are plastic gears inside that strip.
Would you be willing to do a thread on how to make the repair? Mainly how the mirrors come apart and where one would buy the slider motor.

Thanks -

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com