1972 SBC Header to Starter Clearance - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cam1968rsss** · 07-08-2015, 01:39 PM

Hi all, I have a 1972 C10 SWB I am building, with a 400 sbc and turbo 350. My engine has a mini starter on it, my issue I put the headers on it the drivers side fits and clears fine. The passenger side fits and clears except for one tube is within 1/16 inch touching the starter. Am wondering f I should try to bend the pipe a little with a board and hammer. OR???????

Thanks
Eddie

Z10 · 07-08-2015, 08:24 PM

We took a different approach and built a heat shield. I've been running the truck for over a year now with no issues. Check out my build thread for more photos, including some building the shield.

07-08-2015, 01:39 PM	#1
Cam1968rsss Senior Member Join Date: Oct 2010 Location: Zavalla, TX Posts: 411	1972 SBC Header to Starter Clearance Hi all, I have a 1972 C10 SWB I am building, with a 400 sbc and turbo 350. My engine has a mini starter on it, my issue I put the headers on it the drivers side fits and clears fine. The passenger side fits and clears except for one tube is within 1/16 inch touching the starter. Am wondering f I should try to bend the pipe a little with a board and hammer. OR??????? Thanks Eddie

07-08-2015, 08:24 PM	#2
Z10 Registered User Join Date: Aug 2012 Location: Midland, TX Posts: 1,267	Re: 1972 SBC Header to Starter Clearance We took a different approach and built a heat shield. I've been running the truck for over a year now with no issues. Check out my build thread for more photos, including some building the shield. __________________ 1969 RS/SS Z10 Camaro Pace coupe 1972 GMC Short Step buildhttp://67-72chevytrucks.com/vboard/s...=1#post6356218 1979 Mazda RX7 1979 Pontiac Trans Am WS6 & 1979 Pontiac Trans Am 10th Anniversary 1999 Honda Valkyrie 2006 Corvette Z06 2010 BMW 650i



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.