KS 71 blazer getting parted - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-29-2011, 11:08 PM

These parts are SOLD to Fesser, THANKS Frank

rear bumper brackets
6 piece rear panel brackets
blazer emblems
outer AC vents

Thanks again, Randy

teeitup · 03-29-2011, 11:32 PM

Here ya go Frank

teeitup · 03-29-2011, 11:35 PM

Here ya go dbear, 33x12.50x15 stock height

Dirt1972 · 03-30-2011, 12:53 AM

Randy are you going to cut up the left 1/4 panal? If so how much for the tail light area?? That might be a tupid question if so i apologize..thanks Steven
Posted via Mobile Device

Dzlhead · 03-30-2011, 12:54 AM

TEEITUP - Going to pass on the air cleaner too... a co-worker saw me looking at this and has one for me I can have for free.... can't pass that up. Thanks.

teeitup · 03-30-2011, 08:14 AM

Dirt1973, Steven, the drivers side isn't bad, I actually have it cut off already. I'll get pics later today

Dzlhead, no problem

Thanks Randy

Fesser · 03-30-2011, 10:58 AM

Randy, that stepside is beautiful. If I decide not to sell mine it will only be because your truck shows me what it could look like. Frank

Dirt1972 · 03-30-2011, 01:12 PM

So im first in line on the left 1/4 panal tail light area?
Posted via Mobile Device

1970BLZCST · 03-30-2011, 06:14 PM

How about the high tunnel for the 4 speed, still available? Zip 97383

teeitup · 03-30-2011, 10:51 PM

Dirt1972, yes your first in line on it, I'll try to get pics Thurs but it may be Fri. I have a meeting tomorrow night
Thanks Randy

teeitup · 03-30-2011, 10:51 PM

1970BLZCST, its not in the best of shape, I can get pics for you. $10 plus shipping. Thanks Randy

teeitup · 03-30-2011, 10:52 PM

Hey Monte, no problem, we can wait and see on the other stuff. Thanks Randy

teeitup · 03-31-2011, 11:25 PM

1970BLZCST, the high hump is junk, its rusted on both side and cut around transfer shifter, sorry. Thanks Randy

teeitup · 03-31-2011, 11:32 PM

pics for more parts taken off
emblems have some light pitting but not bad
rear patch has some bondo, I think its good from rear of side marker back, basically last 6 or 7 inches

teeitup · 03-31-2011, 11:38 PM

shifter
steering shaft
ac control

teeitup · 03-31-2011, 11:43 PM

clutch/brake pedal setup
booster setup

teeitup · 04-02-2011, 04:17 PM

Wes, it mounts on frame with rear part (bottom side, it was hard to hold up underneath) and front brackets mounts to bumper brackets and the upright mounts to tag bracket

47thriftmaster · 03-30-2011, 08:00 PM

Hey Randy,
PM sent on the parts you have for me. Thanks, Monte

47thriftmaster · 03-31-2011, 07:38 PM

Randy,
Thank you, sounds good. Monte

chalet2506 · 03-31-2011, 09:13 PM

Randy,

Thinking about converting my 72 to a 4 spd. Let me know what you'd need for the tranny w/adapter and t-case, pedal assembly, clutch linkage and brackets, and transmission hump(if 1970 doesn't want it). Also the steering column if it's fixable.

If you can palletize it, I can arrange for a truckline to pick it up.

Thanks. Kurtis

teeitup · 03-31-2011, 11:24 PM

chalet, Kurtis, I'd rather sell it complete. I'm going to give it a few days on here and and local craigslist before I part out the undercarraige. If I decide to part it out, I'll pm you. Thanks Randy

badpeanut · 04-02-2011, 09:52 AM

How much for the hitch? Any pictures of how it mounts to the frame?

teeitup · 04-02-2011, 10:06 AM

$30 plus shipping on it, I can get pics of sitting on frame the way it was mounted this afternoon. Thanks Randy

DBear · 04-02-2011, 04:32 PM

pm and funds sent on wheels Randy...thanks again bud

**FRENCHBLUE72** · 04-02-2011, 04:56 PM

How much for the rear quarter section that you cut out? Im sure shipping would be a killer but who knows.. And I really only need from the rear of the marker light back that may save me a few $$

03-29-2011, 11:08 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted These parts are SOLD to Fesser, THANKS Frank rear bumper brackets 6 piece rear panel brackets blazer emblems outer AC vents Thanks again, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-29-2011 at 11:10 PM.

03-29-2011, 11:32 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Here ya go Frank Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-29-2011, 11:35 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Here ya go dbear, 33x12.50x15 stock height Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2011, 12:53 AM	#4
Dirt1972 Registered User Join Date: Apr 2009 Location: Mansfielde, Tx Posts: 33	Re: 71 blazer getting parted Randy are you going to cut up the left 1/4 panal? If so how much for the tail light area?? That might be a tupid question if so i apologize..thanks Steven Posted via Mobile Device

03-30-2011, 12:54 AM	#5
Dzlhead Registered User Join Date: Jan 2009 Location: Brookfield,WI Posts: 50	Re: 71 blazer getting parted TEEITUP - Going to pass on the air cleaner too... a co-worker saw me looking at this and has one for me I can have for free.... can't pass that up. Thanks. __________________ '66 C-10 Panel '72 Jimmy 4x4

03-30-2011, 08:14 AM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Dirt1973, Steven, the drivers side isn't bad, I actually have it cut off already. I'll get pics later today Dzlhead, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2011, 10:58 AM	#7
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 71 blazer getting parted Randy, that stepside is beautiful. If I decide not to sell mine it will only be because your truck shows me what it could look like. Frank

03-30-2011, 01:12 PM	#8
Dirt1972 Registered User Join Date: Apr 2009 Location: Mansfielde, Tx Posts: 33	Re: 71 blazer getting parted So im first in line on the left 1/4 panal tail light area? Posted via Mobile Device

03-30-2011, 06:14 PM	#9
1970BLZCST Registered User Join Date: Feb 2011 Location: Stayton, Oregon Posts: 39	Re: 71 blazer getting parted How about the high tunnel for the 4 speed, still available? Zip 97383

03-30-2011, 10:51 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Dirt1972, yes your first in line on it, I'll try to get pics Thurs but it may be Fri. I have a meeting tomorrow night Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2011, 10:51 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted 1970BLZCST, its not in the best of shape, I can get pics for you. $10 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2011, 10:52 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Hey Monte, no problem, we can wait and see on the other stuff. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2011, 11:25 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted 1970BLZCST, the high hump is junk, its rusted on both side and cut around transfer shifter, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2011, 11:32 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted pics for more parts taken off emblems have some light pitting but not bad rear patch has some bondo, I think its good from rear of side marker back, basically last 6 or 7 inches Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-31-2011 at 11:33 PM.

03-31-2011, 11:38 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted shifter steering shaft ac control Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-31-2011, 11:43 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted clutch/brake pedal setup booster setup Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-02-2011, 04:17 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Wes, it mounts on frame with rear part (bottom side, it was hard to hold up underneath) and front brackets mounts to bumper brackets and the upright mounts to tag bracket Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-02-2011 at 04:18 PM.

03-30-2011, 08:00 PM	#18
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 71 blazer getting parted Hey Randy, PM sent on the parts you have for me. Thanks, Monte

03-31-2011, 07:38 PM	#19
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 71 blazer getting parted Randy, Thank you, sounds good. Monte

03-31-2011, 09:13 PM	#20
chalet2506 Registered User Join Date: Nov 2008 Location: DFW, Tx Posts: 39	Re: 71 blazer getting parted Randy, Thinking about converting my 72 to a 4 spd. Let me know what you'd need for the tranny w/adapter and t-case, pedal assembly, clutch linkage and brackets, and transmission hump(if 1970 doesn't want it). Also the steering column if it's fixable. If you can palletize it, I can arrange for a truckline to pick it up. Thanks. Kurtis

03-31-2011, 11:24 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted chalet, Kurtis, I'd rather sell it complete. I'm going to give it a few days on here and and local craigslist before I part out the undercarraige. If I decide to part it out, I'll pm you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-02-2011, 09:52 AM	#22
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,755	Re: 71 blazer getting parted How much for the hitch? Any pictures of how it mounts to the frame? __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

04-02-2011, 10:06 AM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted $30 plus shipping on it, I can get pics of sitting on frame the way it was mounted this afternoon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-02-2011, 04:32 PM	#24
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 861	Re: 71 blazer getting parted pm and funds sent on wheels Randy...thanks again bud

04-02-2011, 04:56 PM	#25
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 71 blazer getting parted How much for the rear quarter section that you cut out? Im sure shipping would be a killer but who knows.. And I really only need from the rear of the marker light back that may save me a few $$ __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 04-02-2011 at 04:57 PM.

Register or Log In To remove these advertisements.