MD CST rear panel brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 05-16-2020, 11:44 AM

I have original 6 brackets. Heavy surface rust but seem to clean up decent.

$75 shipped

Original brackets are SOLD but new ones available below

.

**Harold Holbrook** · 05-16-2020, 12:03 PM

I need the ones that goes on the floor and by the tail gate.

72 Jimmy Power · 05-16-2020, 12:49 PM

How about $65? I'll take them. Thanks.

**richard2717** · 06-16-2020, 12:40 PM

Ttt can also make new 6 pc perimeter angle set to go with them for extra$

harrisoncole4 · 06-16-2020, 02:37 PM

Correct me if I am wrong, but at some point you had posted a thread stating that you were making reproduction brackets for the cst panels. Do you have a link for that thread?

**wesmigletz** · 06-16-2020, 02:42 PM

I am interested in a complete set, too, if available. Are you reproducing these? I need them for a non-CST Blazer.

**richard2717** · 06-16-2020, 02:43 PM

Quote:

Originally Posted by harrisoncole4

Correct me if I am wrong, but at some point you had posted a thread stating that you were making reproduction brackets for the cst panels. Do you have a link for that thread?

Was not me, but they are simple enough to make other than the stamped stiffeners.

KevJim72 · 06-16-2020, 10:53 PM

I'll get in line for these. I also need a complete set but interested in these.

**richard2717** · 06-17-2020, 10:46 AM

guys,
here is what I came up with this morning. I made 2 sets but have plenty of material to do more if needed. I figure $135 per set of 12 pcs shipped in lower 48. elsewhere would be a little more to cover added shipping costs. I can punch holes in them but that would add to the cost and they are easy enough to drill. The original brackets feel like 20 ga and are real flimsy. I made these out of 18 ga which stiffened them up quite a bit.

.

harrisoncole4 · 06-17-2020, 10:49 AM

Nice work! I'll take a set.

**wesmigletz** · 06-17-2020, 11:14 AM

They look good. I'll take a set. Thank you

**richard2717** · 06-17-2020, 11:17 AM

Quote:

Originally Posted by harrisoncole4

Nice work! I'll take a set.

Sent PM for address

Quote:

Originally Posted by wesmigletz

They look good. I'll take a set. Thank you

PP link is in my signature below. Thanks

**wesmigletz** · 06-17-2020, 11:26 AM

Quote:

Originally Posted by richard2717

Sent PM for address

PP link is in my signature below. Thanks

Thank you, I will send payment and my address this afternoon.

KevJim72 · 06-17-2020, 12:33 PM

I'll take the original 6 piece set if you still have it. Thanks.

**wesmigletz** · 06-17-2020, 01:09 PM

I sent payment via paypal and sent you a PM with my address

Thank you

**richard2717** · 06-17-2020, 01:10 PM

Quote:

Originally Posted by wesmigletz

I sent payment via paypal and sent you a PM with my address

Thank you

Got your payment and they will ship tomorrow.

Thanks
Richard

**richard2717** · 06-17-2020, 01:14 PM

Quote:

Originally Posted by KevJim72

I'll get in line for these. I also need a complete set but interested in these.

Quote:

Originally Posted by KevJim72

I'll take the original 6 piece set if you still have it. Thanks.

Ok do you want just the original six brackets or do you need angles as well? Do you still want an extra "new" set? I can knock some off for shipping. LMK

Thanks
Richard

KevJim72 · 06-17-2020, 02:22 PM

Quote:

Originally Posted by richard2717

Ok do you want just the original six brackets or do you need angles as well? Do you still want an extra "new" set? I can knock some off for shipping. LMK

Thanks
Richard

PM sent

**richard2717** · 06-17-2020, 05:12 PM

Quote:

Originally Posted by KevJim72

PM sent

Got your payment and they will ship tomorrow morning. Thanks

**richard2717** · 06-18-2020, 10:51 AM

All 3 sets shipped this morning. I do have a couple sets left.

shume · 06-22-2020, 10:43 PM

Just sent pay pal for a set.
Thanks

**wesmigletz** · 06-23-2020, 12:36 AM

Got mine on Saturday. Thank you for shipping them so quickly.

**richard2717** · 06-23-2020, 07:48 AM

Quote:

Originally Posted by shume

Just sent pay pal for a set.
Thanks

I will try to get them out today. Thanks

Quote:

Originally Posted by wesmigletz

Got mine on Saturday. Thank you for shipping them so quickly.

Thanks for letting me know

**richard2717** · 06-28-2020, 01:17 PM

Still have a few sets

**richard2717** · 07-15-2020, 02:44 PM

I only have one set left at the moment

05-16-2020, 11:44 AM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	CST rear panel brackets I have original 6 brackets. Heavy surface rust but seem to clean up decent. $75 shipped Original brackets are SOLD but new ones available below . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 06-17-2020 at 05:11 PM.

05-16-2020, 12:03 PM	#2
Harold Holbrook Registered User Join Date: Dec 2017 Location: Garden City , NY Posts: 489	Re: CST rear panel brackets I need the ones that goes on the floor and by the tail gate.

05-16-2020, 12:49 PM	#3
72 Jimmy Power Registered User Join Date: Mar 2019 Location: South San Francisco, California Posts: 468	Re: CST rear panel brackets How about $65? I'll take them. Thanks.

06-16-2020, 12:40 PM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: CST rear panel brackets Ttt can also make new 6 pc perimeter angle set to go with them for extra$ __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-16-2020, 02:37 PM	#5
harrisoncole4 Registered User Join Date: Sep 2015 Location: St.Thomas, ON Posts: 320	Re: CST rear panel brackets Correct me if I am wrong, but at some point you had posted a thread stating that you were making reproduction brackets for the cst panels. Do you have a link for that thread? __________________ 1969 K5 Blazer - 507 Light Blue - http://67-72chevytrucks.com/vboard/s...d.php?t=802858

06-16-2020, 02:42 PM	#6
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: CST rear panel brackets I am interested in a complete set, too, if available. Are you reproducing these? I need them for a non-CST Blazer. __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

06-16-2020, 10:53 PM	#8
KevJim72 Registered User Join Date: Jan 2020 Location: COLORADO SPRINGS Posts: 152	Re: CST rear panel brackets I'll get in line for these. I also need a complete set but interested in these.

06-17-2020, 10:46 AM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: CST rear panel brackets guys, here is what I came up with this morning. I made 2 sets but have plenty of material to do more if needed. I figure $135 per set of 12 pcs shipped in lower 48. elsewhere would be a little more to cover added shipping costs. I can punch holes in them but that would add to the cost and they are easy enough to drill. The original brackets feel like 20 ga and are real flimsy. I made these out of 18 ga which stiffened them up quite a bit. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-17-2020, 10:49 AM	#10
harrisoncole4 Registered User Join Date: Sep 2015 Location: St.Thomas, ON Posts: 320	Re: CST rear panel brackets Nice work! I'll take a set. __________________ 1969 K5 Blazer - 507 Light Blue - http://67-72chevytrucks.com/vboard/s...d.php?t=802858

06-17-2020, 11:14 AM	#11
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: CST rear panel brackets They look good. I'll take a set. Thank you __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

06-17-2020, 12:33 PM	#14
KevJim72 Registered User Join Date: Jan 2020 Location: COLORADO SPRINGS Posts: 152	Re: CST rear panel brackets I'll take the original 6 piece set if you still have it. Thanks.

06-17-2020, 01:09 PM	#15
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: CST rear panel brackets I sent payment via paypal and sent you a PM with my address Thank you __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

06-18-2020, 10:51 AM	#20
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: CST rear panel brackets All 3 sets shipped this morning. I do have a couple sets left. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-22-2020, 10:43 PM	#21
shume Registered User Join Date: Nov 2013 Location: Ridgeland, MS Posts: 34	Re: CST rear panel brackets Just sent pay pal for a set. Thanks

06-23-2020, 12:36 AM	#22
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: CST rear panel brackets Got mine on Saturday. Thank you for shipping them so quickly. __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz



Register or Log In To remove these advertisements.

06-28-2020, 01:17 PM	#24
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: CST rear panel brackets Still have a few sets __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-15-2020, 02:44 PM	#25
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: CST rear panel brackets I only have one set left at the moment __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

Register or Log In To remove these advertisements.