TN 2 - 67 step beds being parted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 08-27-2016, 09:07 AM

I have 2 - 67 SHORT step beds I need to part out , fenders / cross rails / bed sides . no front panels ,no tail gates .all prices OBO

solid steps with good supports $125.00

good fenders needing top mount repair (easy) $100.00 each

sets of cross rails $75.00

pictures shortly

doo142 · 08-27-2016, 11:49 AM

I would be in too a nice set of cross braces. I need the rear especially . Any pics?

michael bustamante · 08-27-2016, 12:07 PM

shipping those fenders would be a bear or else id be hitting you up.
you got an in bed spare tire mount on one them?

**nbrfd007** · 08-28-2016, 10:30 AM

Do you have a fender side spare mount bracket?
Thanks,
Tim

ryanv70c10 · 08-28-2016, 10:57 AM

Interested in the tail light mounting brackets and the reverse light assemblies if they are there.

ryanv70c10 · 08-28-2016, 10:58 AM

Also stepside rear bumper brackets if you have them.

**Grumpy old man** · 08-28-2016, 01:01 PM

Quote:

Originally Posted by ryanv70c10

Interested in the tail light mounting brackets and the reverse light assemblies if they are there.

I have way your looking for , I'll get some pictures .

NO Spare tire brackets
Posted via Mobile Device

ryanv70c10 · 08-29-2016, 12:24 AM

Quote:

Originally Posted by Grumpy old man

I have way your looking for , I'll get some pictures .

NO Spare tire brackets
Posted via Mobile Device

OK thanks Grumpy!

Rod Run · 08-29-2016, 01:31 PM

would you have any interest in shipping fenders and would you have any pics?

In The Ten Ring · 08-29-2016, 02:37 PM

I have interest in the steps and supports. Awaiting pics.

**Grumpy old man** · 08-29-2016, 03:13 PM

Quote:

Originally Posted by In The Ten Ring

I have interest in the steps and supports. Awaiting pics.

Steps and supports are good I'll get some pictures posted

**Grumpy old man** · 08-29-2016, 03:14 PM

Quote:

Originally Posted by Rod Run

would you have any interest in shipping fenders and would you have any pics?

Pictures coming

5150 · 08-29-2016, 03:56 PM

What about the rear brace?

Deerelindel · 08-30-2016, 08:53 PM

I will take a set of cross pieces, tail light and backup brackets and if you have it a rear bumper with brackets

**Grumpy old man** · 08-31-2016, 05:39 AM

Quote:

Originally Posted by Deerelindel

I will take a set of cross pieces, tail light and backup brackets and if you have it a rear bumper with brackets

I'll get some pictures up ,this crazy heat we've had lately has me slowed down some ,I have a nice rear bumper and a few sets of bumper brackets .

**zicc1835** · 08-31-2016, 06:13 AM

Quote:

Originally Posted by Grumpy old man

I'll get some pictures up ,this crazy heat we've had lately has me slowed down some ,I have a nice rear bumper and a few sets of bumper brackets .

if you have fleet side bumper brackets I'm interested
thanks

doo142 · 08-31-2016, 06:37 AM

Quote:

Originally Posted by doo142

I would be in too a nice set of cross braces. I need the rear especially . Any pics?

Just checking back, lmk thanks

ryanv70c10 · 08-31-2016, 09:09 PM

Quote:

Originally Posted by Grumpy old man

I'll get some pictures up ,this crazy heat we've had lately has me slowed down some ,I have a nice rear bumper and a few sets of bumper brackets .

Need the bumper brackets as well as the tail light brackets and reverse light housings with brackets. Thx

Rod Run · 09-01-2016, 01:28 PM

Quote:

Originally Posted by Grumpy old man

Pictures coming

sweet!

Rod Run · 09-01-2016, 01:30 PM

If you have more than one set of steps and brackets, I would possibly be interested in them too, pending pictures

Stoli · 09-04-2016, 11:08 AM

Also interested in rear fenders after Rod Run.

Thanks

ryanv70c10 · 10-23-2016, 01:46 AM

Quote:

Originally Posted by ryanv70c10

Need the bumper brackets as well as the tail light brackets and reverse light housings with brackets. Thx

Hello do you still have these parts?

Thanks!

ryanv70c10 · 10-28-2016, 11:28 AM

Bump if you are still selling these parts???

michael bustamante · 10-28-2016, 12:07 PM

grump. you have the stepside gravel shields that mount to the rear bumper brackets? ive got fleets but need steppers

Rod Run · 10-28-2016, 01:42 PM

The OP never responded in any way, to the previous posts after he said pics were coming, so I would think this is a dead thread now

08-27-2016, 09:07 AM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	2 - 67 step beds being parted I have 2 - 67 SHORT step beds I need to part out , fenders / cross rails / bed sides . no front panels ,no tail gates .all prices OBO solid steps with good supports $125.00 good fenders needing top mount repair (easy) $100.00 each sets of cross rails $75.00 pictures shortly __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

08-27-2016, 11:49 AM	#2
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,115	Re: 2 - 67 step beds being parted I would be in too a nice set of cross braces. I need the rear especially . Any pics? __________________ 72 Cheyenne k/20, Custom Camper 72 Cheyenne k/20 71 blazer K/5 2WD 454, 6 sp. 67 Chevy Napco c30 Dump 56 GMC Napco 4x4 short step 66 Chevy K10 68 Chevy C/30 4x4

08-27-2016, 12:07 PM	#3
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: 2 - 67 step beds being parted shipping those fenders would be a bear or else id be hitting you up. you got an in bed spare tire mount on one them? __________________ 1967custom

08-28-2016, 10:30 AM	#4
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: 2 - 67 step beds being parted Do you have a fender side spare mount bracket? Thanks, Tim

08-28-2016, 10:57 AM	#5
ryanv70c10 Registered User Join Date: Feb 2016 Location: San Mateo Posts: 199	Re: 2 - 67 step beds being parted Interested in the tail light mounting brackets and the reverse light assemblies if they are there.

08-28-2016, 10:58 AM	#6
ryanv70c10 Registered User Join Date: Feb 2016 Location: San Mateo Posts: 199	Re: 2 - 67 step beds being parted Also stepside rear bumper brackets if you have them.

08-29-2016, 01:31 PM	#9
Rod Run Registered User Join Date: Oct 2013 Location: Massachusetts Posts: 777	Re: 2 - 67 step beds being parted would you have any interest in shipping fenders and would you have any pics? __________________ ______________________ www.northeastrodrun.com

08-29-2016, 02:37 PM	#10
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: 2 - 67 step beds being parted I have interest in the steps and supports. Awaiting pics.

08-29-2016, 03:56 PM	#13
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: 2 - 67 step beds being parted What about the rear brace? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-30-2016, 08:53 PM	#14
Deerelindel Registered User Join Date: Dec 2014 Location: Flat Rock Michigan Posts: 76	Re: 2 - 67 step beds being parted I will take a set of cross pieces, tail light and backup brackets and if you have it a rear bumper with brackets __________________ 1968 GMC 1 ton 4*4 with Detroit Diesel 6v53t 9ft stepside 1978 Chevrolet C50 350sb 8ft fleetside

09-01-2016, 01:30 PM	#20
Rod Run Registered User Join Date: Oct 2013 Location: Massachusetts Posts: 777	Re: 2 - 67 step beds being parted If you have more than one set of steps and brackets, I would possibly be interested in them too, pending pictures __________________ ______________________ www.northeastrodrun.com

09-04-2016, 11:08 AM	#21
Stoli Registered User Join Date: Mar 2015 Location: RI Posts: 38	Re: 2 - 67 step beds being parted Also interested in rear fenders after Rod Run. Thanks

10-28-2016, 11:28 AM	#23
ryanv70c10 Registered User Join Date: Feb 2016 Location: San Mateo Posts: 199	Re: 2 - 67 step beds being parted Bump if you are still selling these parts???

10-28-2016, 12:07 PM	#24
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: 2 - 67 step beds being parted grump. you have the stepside gravel shields that mount to the rear bumper brackets? ive got fleets but need steppers __________________ 1967custom

10-28-2016, 01:42 PM	#25
Rod Run Registered User Join Date: Oct 2013 Location: Massachusetts Posts: 777	Re: 2 - 67 step beds being parted The OP never responded in any way, to the previous posts after he said pics were coming, so I would think this is a dead thread now __________________ ______________________ www.northeastrodrun.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.